Kenwood KDC-320UIM Handleiding

Kenwood Autoradio KDC-320UIM

Lees hieronder de 📖 handleiding in het Nederlandse voor Kenwood KDC-320UIM (34 pagina's) in de categorie Autoradio. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/34
B5A-2097-20 (MN/HN/M2N)© 2017 JVC KENWOOD Corporation
KDC-BT620U
KDC-BT520U
KDC-320UIM
CD-RECEIVER
INSTRUCTION MANUAL
3
BASICS
To On the faceplate
Turn on the power Press .
• Press and hold to turn off the power.
Adjust the volume Turn the volume knob.
Select a source Press repeatedly.
Change the display information Press repeatedly. DISP
( 31)
Faceplate
Attach
Detach
How to reset
ENGLISH
Display window
Volume knob
Detach button
Loading slot
Flashes when the unit enters searching
status.
:
Lights up when Bluetooth
connection is established.
( 15)
USB cable from
the rear of the
unit (USB input
terminal)
Reset the unit within
5seconds after detaching
the faceplate.
ENGLISH 5
GETTING STARTED
Set the clock and date
1 Press the volume knob to enter
[FUNCTION]
.
2 Turn the volume knob to select
[CLOCK]
, then press the knob.
To adjust the clock
3 Turn the volume knob to select
[CLOCK ADJUST]
, then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Hour Minute
5 Turn the volume knob to select
[CLOCK FORMAT]
, then press the knob.
6 Turn the volume knob to select
[12H]
or
[24H]
, then press the knob.
To set the date
7 Turn the volume knob to select
[DATE FORMAT]
, then press the knob.
8 Turn the volume knob to select
[DD/MM/YY]
or
[MM/DD/YY]
, then press
the knob.
9 Turn the volume knob to select
[DATE SET]
, then press the knob.
10 Turn the volume knob to make the settings, then press the knob.
Day Month Year or Month Day Year
11 Press and hold to exit.
To return to the previous setting item, press .
Set the initial settings
1 Press repeatedly to enter STANDBY.
2 Press the volume knob to enter
[FUNCTION]
.
3 Turn the volume knob to select an item (see the following table),
then press the knob.
4 3Repeat step until the desired item is selected or activated.
5 Press and hold to exit.
To return to the previous setting item, press .
2
3
Default:
XX
AUDIO CONTROL
SWITCH
PREOUT
*1
(For )
REAR
/
SUB-W
: Selects whether rear speakers or a subwoofer are
connected to the line out terminals on the rear (through an external
amplifier).
( 36)
DISPLAY
EASY MENU
(For / )
When entering
[FUNCTION]
...
ON
:ZONE 1 illumination changes to white color.;
OFF
:ZONE 1 illumination remains as
[COLOR SELECT]
color.
( 26)
•
ZONE 2 illumination changes to light blue color when you enter
[FUNCTION]
, irregardless of the
[EASY MENU]
setting.
•
Refer to the illustration on page 25 for zone identification.
TUNER SETTING
PRESET TYPE NORMAL
:Memorizes one station for each preset button in each band
( 7, Radio)
.;
MIX
:Memorizes one station for each preset button,
regardless of the selected band.
SYSTEM
KEY BEEP
*1
ON
:Activates the keypress tone.;
OFF
:Deactivates.
TDF ALARM
*1
(For / )
ON: Activates the alarm if you forget to detach the faceplate when ACC is set
to OFF. ; : Deactivates.OFF
SOURCE SELECT
PANDORA SRC
(For / )
ON
:Enables PANDORA in source selection.;
OFF
:Disables.
( 12)
SPOTIFY SRC ON
:Enables SPOTIFY in source selection.;
OFF
:Disables.
( 13)
BUILT-IN AUX ON
:Enables AUX in source selection.;
OFF
:Disables.
( 8)
*1
Not applicable if 3-way crossover is selected.


Product specificaties

Merk: Kenwood
Categorie: Autoradio
Model: KDC-320UIM

Heb je hulp nodig?

Als je hulp nodig hebt met Kenwood KDC-320UIM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Autoradio Kenwood

Handleiding Autoradio

Nieuwste handleidingen voor Autoradio