Kata TCCT Handleiding

Kata cameratas TCCT

Lees hieronder de 📖 handleiding in het Nederlandse voor Kata TCCT (2 pagina's) in de categorie cameratas. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

S P E C I F I C A T I O N S S U B J E C T T O C H A N G E W I T H O U T N O T I C E .

D S 0 9 0 6 0 9 M a d e i n I s r a e l

Expandable Camera Case may be used in carry on or trolly mode

VG-DTS

Interlocking handles

are padded, and

reinforced with PVC

Optional

snap-hook

Development & production by KATA Ltd.

POB 45078 Jerusalem, Israel 91450

Tel: +972-2-5911000

Fax: + 972-2-54005504

www.kata-bags.com

Info: technical@kata-bags.com

Sales: videophoto@kata-bags.com

Protective Carrying

Technology

TCCT

KT / VA-014

Wt. 9.9 lbs

5.7 Kg

H13.4

34 cm

W7-9

18-23 cm

L22.4-28.4

57-74 cm

ORDER CODE

DP BUCKLE

KATA's TCCT meets the strict new airline regulations for carry-on bag size.

And its modularity means that when you land it adapts to hold your fully

assembled camera in everyday use. The TCCT holds the camera with the

battery removed; in some cases the viewfinder must be removed and with

extremely large cameras the lens must be removed as well. The

disassembled parts go into padded pouches in the case. To expand the

case to its working position, the TCCT has a compartment that lengthens

the case and a side compartment that makes it wider. Like the turtle's

shell, the case and the extended compartments are padded and rigid at

the same time, to protect their delicate contents.

The detachable trolley makes its easier to carry the bag in the airport. In

narrow check post you can remove the trolley in order to fit Airline

Regulations Measuring Box.

Travel

mode

Working mode

Pocket for cassettes or

batteries

Lens pouch Viewfinder pouch

6 layers of protection

Main compartment

for camera

Dual-use yellow

aluminum buckles

Materials

Fabric: DuPontd 1000 denier Cordurad and specially fabricated Nycore

with fluorocarbon based water-repellent finish on the outside and three

layers of polyurethane coating on the inside.

Straps: High tenacity Polypropylene and Nylon webbing.

Padding: Cross-linked Polyethylene-foam in shoulder straps and handles.

Zippers: Silent action YKKd coil and molded zippers.

Buckles: ITWd and Duraf lexd Nylon and Acet al buckles.

TCCT

SHOULDER

STRAP

INSERTROLLEY

INCLUDED

CLICK

HANDLES

ON BOARD

TOBLERONE

Extendable front

part for the lens

Extendable side

for viewfinder

Pocket for

lens cap

are included with the bag

Extend your warranty

Five Year Warranty: Kata warrants each product to be free of defects

in material and workmanship for a period of 5 years from the date

of purchase.

Lifetime Warranty Extension: By registering your product online

with kata, for a limited period we offer lifetime service.

For free extended warranty please visit our web site and register

your product: www.kata-bags.com

A) Assemble the camera (put the lens caps in pocket E).

B) Expand the bag:

1) Extend the front part C

a) Open the zipper M.

b) Insert the portable padded lining F into the front part

with two ends facing up then fix it into place with the Velcro

strap L.

2) Expand the side compartment B

wrap around zipper K.

b) From the inside fix the extendable sides "roof" into place with

the Velcro strap.

3) Place Lens pouch I in the mesh pocket and the Viewfinder pouch

G in the inside wall of the extendable side for viewfinder.

C) Place the camera in the bag with the lens going in first into the

extendable front part.

D) Place cassettes or batteries in the external pocket A.

Switching from travel mode (Bag is shrinked to on board position and camera dismounted)

into work mode (Bag fully expanded and camera put together)

Portable padded lining

inside view

Insertrolley System

DTS included with this model

S P E C I F I C A T I O N S S U B J E C T T O C H A N G E W I T H O U T N O T I C E .

A) Preparing the bag

1) Take out the camera.

2) Empty the external pocket A.

3) Compress the extendable side for viewfinder pocket B:

inside the bag pull the Velcro ribbon downward to

extendable sides "roof".

On the outside close the wrap around zipper

4) Compress the extendable front part C:

Release the velcro on the trolley handle (Back side of the case).

Open the upper Velcro fastener L (in the front part C).

Using one hand, remove the portable padded lining F by pulling

one of its rigid corners inward.

Compress the pocket by closing the zipper M.

Close the snap hooks of the front mesh handle to shorten its length

(Upper part).

Operating instructions

Switching from work mode (Bag fully expanded and camera put together)

into travel mode (Bag is shrinked to on board position and camera dismounted)

Pocket for cassettes or

batteries

Portable padded lining

b) Preparing the camera for packing:

1) Pack the parts you have chosen to disassemble

in their individual pouches:

Tripod plate (black pocket inside the bag)

Lens pouch I

Viewfinder pouch G

Extendable front part

for the lens

Extendable side

for viewfinder

Pocket for

lens cap

c) Packing the camera in the bag:

Option I: dismounted battery

1) Spread the portable padded lining F on the bottom of the bag so

it doesnt take place 1.

b) Place the camera with 2) Place the camera with the lens in the

direction of the extendable front part C.

3) Place the battery (inserted in pouch H) in the empty space

available.

Option II: dismounted lens

1) Place the camera with the lens in the direction of the extendable

front part C.

2) Place the lens (inserted in lens pouch I) in the space created

between the camera and the bag's wall.

3) Place the original lens cap in the lens cap pocket E.

4) Place the U shape around camera to create separation between

the camera and the dismounted lens 2.

Option III: dismounted lens and viewfinder

1) Place the camera with the lens in the direction of the extendable

front part C.

2) Place the lens (inserted in lens pouch I) in the space between the

camera and the bag's wall.

3) Place the original lens cap in the lens cap pocket E.

4) Place the U shape around camera to create separation between

the camera and the dismounted lens 2.

5) Place the viewfinder (inserted in viewfinder pouch G) in the

empty space available.

d) dismount the trolley (only if necessary)

1) open the fastening velcro on the bag floor.

2) pull the trolley out of the sleeve and fold it.

Portable padded lining

Portable padded

lining

Battery in pouch

Lens in pouch Lens in pouch

Viewfinder in pouch

Packaging option I Packaging option II Packaging option III

CAMERA

LENS

Product specificaties

Merk:	Kata
Categorie:	cameratas
Model:	TCCT
Kleur van het product:	Blauw
Gewicht:	4850 g
Afmetingen binnenkant (B x D x H):	229 x 721 x 340 mm
Compatibiliteit:	Hitachi, Ikegami, JVC, Panasonic, Sony, Thomson
Afmetingen (B x D x H):	330 x 790 x 460 mm