Juki UT59 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Juki UT59 (14 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
INSTRUCTION MANUAL
MF-7900,7900D/UT59
i
CONTENTS
I. SPECIFICATIONS ...........................................................................................................1
II. AT THE BEGINNING......................................................................................................1
III. INSTALLING THE ACCESSORIES.............................................................................2
1. Installing the air regulator 2 ...................................................................................................................
2. Installing the manifold 2 .........................................................................................................................
3. Connecting the cords 3 ..........................................................................................................................
4. Setting procedure of the machine head 4 .............................................................................................
IV. AIR PIPING DRAWING.................................................................................................5
1. Piping of the thread trimmer device 5 ...................................................................................................
2. Adjusting the air regulator 5 ...................................................................................................................
V. THREADING THE MACHINE HEAD ............................................................................6
VI. ADJUSTING THE LOOPER THREAD TRIMMER MECHANISM .............................7
1. Initial position of the looper thread trimmer mechanism 7 .................................................................
VII. INSTALLING THE SS LEVER UNIT ..........................................................................8
1. Installing the SS lever unit 8 ..................................................................................................................
2. Adjusting the SS lever unit 8 ..................................................................................................................
VIII. DRAWING OF THE TABLE .......................................................................................9
IX. SETTING THE UPPER STOP POSITION OF THE NEEDLE BAR ........................10
X. SETTING THE RAVELING PREVENTION PARAMETER .......................................12
– 1 –
I. SPECIFICATIONS
Model name High-speed, cylinder-bed coverstitch machine
Model MF-7900 series
Stitch type ISO standard 406, 407, 602, and 605
Example of application
For preventing thread from raveling at the end of hemming or other processes
Sewing speed Max. 6,000 sti/min (at the time of intermittent operation) Direct-drive type
Speed of stitch at the delivery: 4,500 sti/min (at the time of intermittent operation)
Needle gauge 5.6 mm and 6.4 mm 3-needle .....
2-needle ..... 4.0 mm and 4.8 mm
Di󰀨erential feed ratio 1 : 0.9 to 1 : 1.4 (stitch length : less than 2.5 mm) * Only for H23
(1 : 0.6 to 1 :1 .1, when the di󰀨erential link hinge screw is changed)
Micro-di󰀨erential feed adjustment mechanism is provided. (Micro-adjustment)
Stitch length 0.9 mm to 3.6 mm (can be adjusted up to 4.5 mm)
Needle UY128GAS #9S to #14S (standard #10S)
Needle bar stroke 31mm (33 mm when the eccentric pin is changed over)
Dimensions (Height) 450 x (Width) 456 x (Length) 299
Weight 45 kg (With pneumatic type thread trimmer)
Lift of presser foot 8 mm (needle gauge : 5.6 mm without top covering), and 5 mm (with top covering)
Micro-lifter mechanism is provided.
Feed adjustment
method
Main feed ............... dial type stitch pitch adjustment method
Di󰀨erential feed lever adjustment method (micro-adjustment mechanism is provided.) .....
Looper mechanism Spherical rod drive method
Lubricating system Forced lubrication method by gear pump
Lubricating oil JUKI GENUINE OIL 18
Oil reservoir capacity Oil gauge lower line : 600 cc to upper line : 900 cc
Installation Table-mount type, Semi-submerged type
Noise - Equivalent continuous emission sound pressure level (L
pA) at the workstation:
A-weighted value of 79.5 dB; (Includes K
pA = 2.5 dB); according to ISO 10821- C.6.2 -ISO 11204 GR2 at 4,500
sti/min.
Remove xed band for transportation before setting
up the sewing machine.
II. AT THE BEGINNING


Product specificaties

Merk: Juki
Categorie: Naaimachine
Model: UT59

Heb je hulp nodig?

Als je hulp nodig hebt met Juki UT59 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Naaimachine Juki

Handleiding Naaimachine

Nieuwste handleidingen voor Naaimachine