Juki PLC-2760NVM Handleiding
Juki
Naaimachine
PLC-2760NVM
Lees hieronder de 📖 handleiding in het Nederlandse voor Juki PLC-2760NVM (42 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/42
PLC-2760NVM
INSTRUCTION MANUAL
CONTENTS
1. Specications ................................................................................................................. 1
2. Threading the machine head ......................................................................................... 2
3. Take-up thread guide ..................................................................................................... 3
4. Pneumatic components (when the pneumatic center guide is used) ....................... 4
5. Setting the incidental device ......................................................................................... 6
5-1. Setting the ON/OFF status of the center guide ................................................... 6
5-2. Setting the optional input for the the center guide ............................................. 8
5-3. Setting the optional output for the center guide ................................................ 9
6. Adjusting the hook needle guard ................................................................................ 10
7. Adjusting the bobbin case opening lever .................................................................. 10
8. Adjusting the timing of the opener ............................................................................. 11
9. How to correct the main shaft reference angle ......................................................... 12
10. Position of the thread trimmer cam .......................................................................... 14
11. Adjusting the position of the moving knife .............................................................. 15
12. Adjusting the position of the clamp spring ............................................................. 16
13. 17 How to adjust the cam timing ....................................................................................
13-1. 17 Timing of the vertical feed cam ........................................................................
13-2. Top feed cam timing .......................................................................................... 18
14. 20 Needle sway (Adjusting the bottom feed amount) ..................................................
15. Tension correction ..................................................................................................... 21
15-1. Tension correction and sewing speed ............................................................. 22
15-2. Tension correction and remaining amount of bobbin thread ........................ 23
16. Thread clamp device .................................................................................................. 25
16-1. How to install the thread clamp device ............................................................ 25
16-2. How to set up the thread clamp device ............................................................ 28
16-3.
How to set the thread clamp operation while the presser foot is in its upper
position.................................................................................................................... 31
17. How to replace the hook cover ................................................................................. 32
18. How to install the oil lter .......................................................................................... 34
19. 35 Counter function .........................................................................................................
19-1. 35 Displaying the sewing screen under the counter display mode ...................
19-2. Types of the counter .......................................................................................... 35
19-3. 36How to set the counter ......................................................................................
19-4. 40How to reset the count-completion state .........................................................
CAUTION
This Instruction Manual for the PLC-2760NVM only describes their differences from the
standard models (PLC-2760V).
For safety-related information, carefully read and fully understand "Safety precautions"
described in the Instruction Manual for the standard models before using your sewing ma-
chine.
– 1 –
1. Specications
PLC-2760NVMA70BBZ
No. Item Application
1 Model PLC-2760NVM
2 Model name 2-needle, post-bed, unison-feed, lockstitch machine with vertical-axis hook
3 Application Medium- to heavy-weight materials, car seat, furniture
4 Sewing speed Max. 2,500 sti/min
(Refer to "10. SEWING SPEED TABLE" in the Instruction Manual for the standard
model.)
5 Needle Ferd. SCHMETZ 134 - 35 (Nm 100 to Nm 180) (Standard : Nm 140)
6 Applicable thread size for sewing #30 to #5 (Europe 60 / 3-20 / 3)
7 Applicable thread size to be cut #30 to #5 (Europe 60 / 3-20 / 3)
8 Stitch length Max. 12 mm (forward/reverse feed)
However, the machine is shipped with its stitch length restricted to 7 mm.
9 Presser foot lift 20 mm
10 Presser foot pressure control Electric control (driven by a pulse motor)
11 Horizontal feed control Electric control (driven by a pulse motor)
12 Alternate vertical feed control Electric control (driven by a pulse motor)
13 Reverse stitch adjusting method Pulse motor driving (with touch-back switch)
14 Number of patterns Sewing pattern ............................ 99 patterns (For the polygonal shape sewing, as
many as 10 patterns can be registered.)
Cycle sewing pattern 9 patterns ...................
Custom-pitch pattern 20 patterns ...................
Condensation custom pattern 9 patterns .....
15 Thread take-up Link thread take-up
16 Needle bar stroke 40 mm
17 Amount of the alternate vertical
movement
MAX. 9 mm
However, the machine is shipped with its stitch length restricted to 6.5 mm.
18 Needle thread tension Electric control (driven by a solenoid)
19 Hook Vertical-axis 1.6-fold hook (Latch type)
20 Feed mechanism Box feed
21 Driv e syst em/Top a nd b otto m
vertical axis drive
Main shaft direct drive system/Timing belt
22 Lubrication Automatic lubrication by semi-dry head plunger pump (with oil gauge)
23 Lubricating oil JUKI New Defrix Oil No. 1 (equivalent to ISO standard VG7)
or JUKI MACHINE OIL No. 7
24 Bed size 643 mm × 178 mm
25 Space under the arm 347 mm × 298 mm
26 Hand wheel size Outer diameter : ø123 mm
27 Motor/Control box DD motor : 800W AC servomotor
Control box : SC-952
28 Machine head weight 88 kg
29 Rated power consumption 600 VA
30 Noise - Equivalent continuous emission sound pressure level (L
pA) at the
workstation:
A-weighted value of 83.5 dB; (Includes K
pA = 2.5 dB); according to ISO
10821- C.6.2 - ISO 11204 GR2 at 2,500 sti/min.
- Sound power level (L
WA);
A-weighted value of 90.5 dB; (Includes K
WA = 2.5 dB); according to ISO
10821- C.6.2 - ISO 3744 GR2 at 2,500 sti/min.
Product specificaties
| Merk: | Juki |
| Categorie: | Naaimachine |
| Model: | PLC-2760NVM |
Heb je hulp nodig?
Als je hulp nodig hebt met Juki PLC-2760NVM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Naaimachine Juki
16 November 2024
16 November 2024
16 November 2024
19 Maart 2024
6 Januari 2024
5 Januari 2024
5 Januari 2024
5 Januari 2024
1 December 2023
22 Maart 2023
Handleiding Naaimachine
- Naaimachine IKEA
- Naaimachine AEG
- Naaimachine Medion
- Naaimachine Siemens
- Naaimachine Aigger
- Naaimachine Alfa
- Naaimachine Ambiano
- Naaimachine Anker-Bernette
- Naaimachine Baby Lock
- Naaimachine Bernina
- Naaimachine Bestron
- Naaimachine Blaupunkt
- Naaimachine Brother
- Naaimachine Durabase
- Naaimachine Durkopp Adler
- Naaimachine Easy Home
- Naaimachine Easymaxx
- Naaimachine Elna
- Naaimachine Emerio
- Naaimachine Empisal
- Naaimachine ER
- Naaimachine Feiyue
- Naaimachine Gritzner
- Naaimachine Hema
- Naaimachine Hofmann
- Naaimachine Home Electric
- Naaimachine Huskystar
- Naaimachine Husqvarna
- Naaimachine Husqvarna-Viking
- Naaimachine Kayser
- Naaimachine Kenmore
- Naaimachine Kohler
- Naaimachine Lervia
- Naaimachine Lewenstein
- Naaimachine Lifetec
- Naaimachine Livoo
- Naaimachine Mediashop
- Naaimachine Micromaxx
- Naaimachine Mio Star
- Naaimachine Muller
- Naaimachine Necchi
- Naaimachine Novamatic
- Naaimachine Pfaff
- Naaimachine Primera
- Naaimachine Privileg
- Naaimachine Siemssen
- Naaimachine Silver
- Naaimachine Silvercrest
- Naaimachine Singer
- Naaimachine Sinojo
- Naaimachine Solac
- Naaimachine Termozeta
- Naaimachine Tesco
- Naaimachine Toyota
- Naaimachine Tristar
- Naaimachine Vendomatic
- Naaimachine Veritas
- Naaimachine Victoria
- Naaimachine W6
- Naaimachine Weasy
- Naaimachine Yamata
- Naaimachine Zippy
- Naaimachine Janome
- Naaimachine Jata
- Naaimachine Jocca
- Naaimachine Crofton
- Naaimachine Guzzanti
- Naaimachine Mellerware
- Naaimachine Sinbo
- Naaimachine Carina
- Naaimachine Kunft
- Naaimachine Prince
- Naaimachine RCE
- Naaimachine Yamato
- Naaimachine Prixton
- Naaimachine Bernette
- Naaimachine Union Special
- Naaimachine Meister Craft
- Naaimachine Łucznik
- Naaimachine LERAN
- Naaimachine SteamMax
Nieuwste handleidingen voor Naaimachine
13 Januari 2025
13 Januari 2025
23 December 2024
23 December 2024
23 December 2024
23 December 2024
23 December 2024
23 December 2024
21 December 2024
20 December 2024