Juki LK-1910 Handleiding
Juki
Naaimachine
LK-1910
Lees hieronder de 📖 handleiding in het Nederlandse voor Juki LK-1910 (67 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/67
INSTRUCTION MANUAL
LK-1910, LK-1920
CONTENTS
1. SPECIFICATIONS 1 .................................
2. CONFIGURATION 2 ................................
2-1. Names of main unit 2 ...........................................
2-2. Names and explanation of switches on the
operation panel 3 ..................................................
3. INSTALLATION 4 .....................................
3-1. Installing the table 4 .............................................
3-2. Installation procedure of the electrical box 5 ....
3-3. Connecting the power source cord 6 .................
3-4. How to carry the sewing machine....................7
3-5. Installation of the sewing machine head.........7
3-6. Installing the motor cover.................................8
3-7. Pedal switch 8 .......................................................
3-8. Tilting the sewing machine head 9 .....................
3-9. Installing the operation panel 9 ...........................
3-10. Connecting the cords 10 .....................................
3-11. Handling the cords ..........................................11
3-12. Installing the eye protection cover ................11
3-13. Installing the thread stand 12 .............................
3-14. Installing the auxiliary throat plate cover 12 .....
3-15. Attaching and removing the bolt for
transportation 13 ..................................................
4. OPERATION OF THE SEWING MA-
CHINE 14 .................................................
4-1. Lubrication 14 .......................................................
4-2. Attaching the needle 15 .......................................
4-3. Threading the machine head 15 ..........................
4-4. Installing and removing the bobbin case 16 ......
4-5. Installing the bobbin 16 .......................................
4-6. Adjusting the thread tension 16 ..........................
4-7. Adjusting the thread take-up spring 17 ..............
4-8. Adjusting the height of the intermediate
presser (Only for the LK-1920) 17 .......................
4-9. Adjusting the intermediate presser stroke (Only
for the LK-1920) 17 ...............................................
5. OPERATION OF THE SEWING MA-
CHINE (BASIC) 19 ..................................
5-1. Model selection................................................19
5-2. Selection of language 19 .....................................
5-3. Setting the pattern number 20 .............................
5-4. Setting the item data 20 .......................................
5-5. Checking the contour of a sewing pattern 23 ....
5-6. Sewing 24 ..............................................................
5-7. Changing the pattern to a different one 25 ........
5-8. Winding a bobbin 25 ............................................
5-9. Adjustment of the bobbin thread winder
components 27 .....................................................
6. OPERATION OF THE SEWING MA-
CHINE (ADVANCED) 28 ..........................
6-1. Performing sewing using the pattern keys 28 ...
6-2. Sewing using the combination function (cycle
sewing) 32 .............................................................
6-3. Sewing through the use of the counter 35 .........
6-4. How to use the temporary stop 38 ......................
6-5. Copying or deleting various kinds of pattern
data 39 ...................................................................
6-6. Communication 41 ...............................................
6-7. Cautions in operation 43 ......................................
6-8. Setting enable/disable of standard pattern
invoking 44 ............................................................
7. MAINTENANCE 45 ..................................
7-1. Adjusting the height of the needle bar 45 ..........
7-2. Adjusting the needle-to-shuttle relation 46 ........
7-3. Adjusting the lift of the work clamp foot 47 .......
7-4. The moving knife and counter knife 47 ..............
7-5. Adjusting the rising amount of the thread
tension disk 48 .....................................................
7-6. Thread breakage detector plate 48 .....................
7-7. Draining waste oil 49 ............................................
7-8. Replacing the fuse...........................................49
8. HOW TO USE THE MEMORY
SWITCH 50 ..............................................
8-1. Method of changing memory switch data 50 .....
8-2. List of the memory switch functions 51 .............
9. OTHERS.............................................. 55
9-1. LK-1910/-1920 data ROM.................................55
9-2. Connection of the optional pedal 55 ...................
9-3. Error list............................................................58
9-4. Troubles and corrective measures 62 ................
9-5. Table of the optional parts 63 ..............................
9-6. Silicon oil tank 64 .................................................
10. DRAWING OF THE TABLE 65 ..............
－ 1 －
1 Sewing area X (lateral) direction 100 mm Y (longitudinal) direction 60 mm
2 Max. sewing speed 2500 sti/min* (When sewing pitches are less than 3 mm.)
3 Stitch length 0.1 to 10.0 mm (adjustable in 0.1 mm step)
4Feed motion of work clamp
foot Intermittent feed (2-shaft drive by stepping motor)
5 Needle bar stroke 41.2 mm
6 Needle DP × 5, DP × 17
7 Lift of work clamp foot 18 mm (standard) Max. 22 mm (Pneumatic type : max. 25 mm)
8 Hook 2-fold semi-rotary hook (oil wick lubrication)
9Intermediate presser
stroke
4 mm (standard)
(Adjustable in the range of 0 and 4 to 10 mm) (LK-1920 only)
10 Lift of intermediate presser 18 mm (LK-1920 only)
11 Lubricating oil New Defrix Oil No. 2 (supplied by oiler)
12 Data recording Memory in MAIN PCB (80 Kbyte)
EEP-ROM (32 Kbyte)
13
Enlarging / Reducing facility
20 % to 200 % (1% step) in X direction and Y direction respectively
14 Enlarging / Reducing
method Pattern enlargement / reduction can be done by increasing/decreasing the stitch length
15
Temporary stop function
Used to stop machine operation during a stitching cycle.
16 Thread breakage detection
function Used to detect needle thread breakage to automatically stop machine.
17 Max. sewing speed limita-
tion 200 to 2,500 sti/min* (100 sti/min steps)
18 Pattern selection
Standard patterns : 51
User patterns : 1 to 200
Old user patterns : 1 to 99
Media patterns : 1 to 999
19 Bobbin thread counter UP/DOWN type (0 to 9999)
20 Sewing machine motor Servo motor
21 Dimensions W : 1200 mm L : 700 mm H : 1160 mm
(Use the standard table and stand.)
22 Mass (gross mass) Machine head : 46 kg Control box : 5 kg
23
Power consumption
380 VA (Operation for 35 seconds at 2,500 sti/min; at rest for two seconds)
24 Operating temperature
range 5 ˚C to 35 ˚C
25
Operating humidity range
35 % to 85 % (No dew condensation)
26 Line voltage Rated voltage ±10% 50/60 Hz
27 Air pressure used 0.5 to 0.55 MPa (Only for the pneumatic type)
28 Air consumption 1.3 ℓ/min (Only for the pneumatic type)
29 Noise
- Equivalent continuous emission sound pressure level (L
pA) at the workstation :
A-weighted value of 77.5 dB; (Includes K
pA = 2.5 dB); according to ISO 10821- C.6.3
-ISO 11204 GR2 at 2,500 sti/min for the sewing cycle, 1.0s ON (Pattern : No.1).
- Sound power level (LWA) ;
A-weighted value of 77.5 dB; (Includes K
WA = 2.5 dB); according to ISO 10821- C.6.3
-ISO 3744 GR2 at 2,500 sti/min for the sewing cycle, 1.0s ON (Pattern : No.1).
* Reduce the max. sewing speed in accordance with the sewing conditions.
1. SPECIFICATIONS
Product specificaties
| Merk: | Juki |
| Categorie: | Naaimachine |
| Model: | LK-1910 |
Heb je hulp nodig?
Als je hulp nodig hebt met Juki LK-1910 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Naaimachine Juki
16 November 2024
16 November 2024
16 November 2024
19 Maart 2024
6 Januari 2024
5 Januari 2024
5 Januari 2024
5 Januari 2024
1 December 2023
22 Maart 2023
Handleiding Naaimachine
- Naaimachine IKEA
- Naaimachine AEG
- Naaimachine Medion
- Naaimachine Siemens
- Naaimachine Aigger
- Naaimachine Alfa
- Naaimachine Ambiano
- Naaimachine Anker-Bernette
- Naaimachine Baby Lock
- Naaimachine Bernina
- Naaimachine Bestron
- Naaimachine Blaupunkt
- Naaimachine Brother
- Naaimachine Durabase
- Naaimachine Durkopp Adler
- Naaimachine Easy Home
- Naaimachine Easymaxx
- Naaimachine Elna
- Naaimachine Emerio
- Naaimachine Empisal
- Naaimachine ER
- Naaimachine Feiyue
- Naaimachine Gritzner
- Naaimachine Hema
- Naaimachine Hofmann
- Naaimachine Home Electric
- Naaimachine Huskystar
- Naaimachine Husqvarna
- Naaimachine Husqvarna-Viking
- Naaimachine Kayser
- Naaimachine Kenmore
- Naaimachine Kohler
- Naaimachine Lervia
- Naaimachine Lewenstein
- Naaimachine Lifetec
- Naaimachine Livoo
- Naaimachine Mediashop
- Naaimachine Micromaxx
- Naaimachine Mio Star
- Naaimachine Muller
- Naaimachine Necchi
- Naaimachine Novamatic
- Naaimachine Pfaff
- Naaimachine Primera
- Naaimachine Privileg
- Naaimachine Siemssen
- Naaimachine Silver
- Naaimachine Silvercrest
- Naaimachine Singer
- Naaimachine Sinojo
- Naaimachine Solac
- Naaimachine Termozeta
- Naaimachine Tesco
- Naaimachine Toyota
- Naaimachine Tristar
- Naaimachine Vendomatic
- Naaimachine Veritas
- Naaimachine Victoria
- Naaimachine W6
- Naaimachine Weasy
- Naaimachine Yamata
- Naaimachine Zippy
- Naaimachine Janome
- Naaimachine Jata
- Naaimachine Jocca
- Naaimachine Crofton
- Naaimachine Guzzanti
- Naaimachine Mellerware
- Naaimachine Sinbo
- Naaimachine Carina
- Naaimachine Kunft
- Naaimachine Prince
- Naaimachine RCE
- Naaimachine Yamato
- Naaimachine Prixton
- Naaimachine Bernette
- Naaimachine Union Special
- Naaimachine Meister Craft
- Naaimachine Łucznik
- Naaimachine LERAN
- Naaimachine SteamMax
Nieuwste handleidingen voor Naaimachine
21 December 2024
20 December 2024
20 December 2024
20 December 2024
20 December 2024
20 December 2024
20 December 2024
20 December 2024
20 December 2024
20 December 2024