JL Audio M800/8v2 Handleiding

JL Audio Receiver M800/8v2

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor JL Audio M800/8v2 (11 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
ownerโ€™s manual
Remote
Level
Mode
All | 5- 8 | 7&8
Input M ode
2 Ch. | 4 Ch. | 8 Ch.
CH. 7
(L ) CH. 8
(R )
CH. 7 & 8
Filter Mode
Filter Freq. (Hz )
Input
Sens.
O๎€Ÿ | HP | LP
CH. 5
(L ) CH. 6
(R )
CH. 3
(L ) CH. 4
(R )
CH. 1
(L )
CH. 1 & 2 CH. 3 & 4 CH. 5 & 6
CH. 2
(R )
Filter Mode
Filter Freq. (Hz )
Input
Sens.
O๎€Ÿ | HP | LP
Filter Mode
Filter Freq. (Hz )
Input
Sens.
O๎€Ÿ | HP | LP
Filter Mode
Filter Freq. (Hz )
Input
Sens.
O๎€Ÿ | HP | LP
CH. 1
CH. 2
CH. 3
CH. 4
CH. 5
CH. 6
(L )
(R )
CH. 7
CH. 8
INPUT SE CT ION
+12 VDC Groun d Remote
Turn- On
Mode
Rem. | O๎€Ÿset | Signal
Input Vo ltag e
Low | High
2 Ch. Input 1 fee ds CH. 1, CH. 3, CH. 5 & CH. 7
Input 2 fee ds CH. 2, CH. 4, CH. 6 & CH. 8
4 Ch. Input 1 fee ds CH. 1 & CH. 3
Input 2 fee ds CH. 2 & CH. 4
Input 5 fee ds CH. 5 & CH. 7
Input 6 fee ds CH. 6 & CH. 8
8 Ch. Each input feeds its
corresponding output channel
INP UT M OD ES :
Mari ne 8 Cha nne l Am p li fie r
Thank you for purchasing a JL Audio amplifier for
your marine sound system.
Your amplifier has been designed and manufactured to exacting
standards in order to ensure years of musical enjoyment in your vessel.
For maximum performance, we highly recommend that you have
your new amplifier installed by an authorized JL Audio dealer. Your
authorized dealer has the training, expertise and installation equipment
to ensure optimum performance from this product. Should you
decide to install the amplifier yourself, please take the time
to read this manual thoroughly so as to familiarize yourself
with its installation requirements and setup procedures.
If you have any questions regarding the instructions in this
manual or any aspect of your amplifierโ€™s operation, please contact your
authorized JL Audio dealer for assistance. If you need further assistance,
please call the JL Audio Technical Support Department
at (954) 443-1100 during business hours.
800W Marine 8 Channel Ampli๎€Ÿer
2 | JL Audio - XD800/8v2 Ownerโ€™s Manual
PROTECT YOUR HEARING!
We value you as a long-term customer. For
that reason, we urge you to practice restraint in
the operation of this product so as not to damage
your hearing and that of others in your vessel.
Studies have shown that continuous exposure to
high sound pressure levels can lead to permanent
(irreparable) hearing loss. This and all other
high-power amplifiers are capable of producing
such high sound pressure levels when connected
to a speaker system. Please limit your continuous
exposure to high volume levels.
While driving, operate your audio system
in a manner that still allows you to hear necessary
noises to operate your vessel safely (horns,
sirens, etc.).
SERIAL NUMBER
In the event that your amplifier requires
service or is ever stolen, you will need to have
a record of the productโ€™s serial number. Please
take the time to enter that number in the space
provided below. The serial number can be found
on the bottom panel of the amplifier and on the
amplifier packaging.
Serial Number:
INSTALLATION APPLICATIONS
This amplifier is designed for operation in
vessels with 12 volt, negative-ground electrical
systems. Use of this product in vessels with
positive ground and/or voltages other than 12V
may result in damage to the product and will void
the warranty.
This product is not certified or approved for
use in aircraft.
Do not attempt to โ€œbridgeโ€ the outputs of this
amplifier with the outputs of a second amplifier,
including an identical one.
PLANNING YOUR INSTALLATION
It is important that you take the time to read
this manual and that you plan out your
installation carefully. The following are some
considerations that you must take into account
when planning your installation.
Cooling Efficiency Considerations:
The outer shell of your JL Audio amplifier is
designed to remove heat from the amplifier
circuitry. For optimum cooling performance, this
outer shell should be exposed to as large a volume
of air as possible. Enclosing the amplifier in a
small, poorly ventilated chamber can lead to
excessive heat build-up and degraded
performance. If an installation calls for an
enclosure around the amplifier, we recommend
that this enclosure be ventilated with the aid
of a fan. In normal applications, fan-cooling
is not necessary.
+12 VDC Ground Remote
2 Ch. I nput 1 feeds CH. 1, CH. 3, CH. 5 & CH. 7
Input 2 feeds CH. 2, CH. 4, C H. 6 & CH. 8
4 Ch. I nput 1 feeds CH. 1 & CH. 3
Input 2 feeds CH. 2 & CH. 4
Input 5 feeds CH. 5 & CH. 7
Input 6 feeds CH. 6 & CH. 8
8 Ch. Each inp ut f eeds its
corresponding output channel
INPUT MODES:
Marine 8 Channel Amplifier
+12 VDC Ground Remot e
(L)
(
R)
Remote Turn-On
Connector
(pg. 6)
Chassis Ground
Connector
(pg. 5)
Ch
Pream
+12 V Power
Connector
(pg. 5)
4 | JL Audio - XD800/8v2 Ownerโ€™s Manual
ProduCt desCriPtion
The JL Audio M800/8v2 is an eight-channel,
full-range audio amplifier utilizing JL Audio
NexDโ„ข ultra-high speed switching technology to
deliver outstanding fidelity and efficiency.
The M800/8v2 can be operated with a wide
variety of source units and system configurations.
tYPiCal installation sequenCe
The following represents the sequence for a
typical amplifier installation. Additional steps
and different procedures may be required in some
applications. If you have any questions, please
contact your authorized JL Audio dealer for
assistance.
1) Disconnect the negative battery post
connection and secure the disconnected cable
to prevent accidental re-connection during
installation. This step is not optional.
2) Run 4 AWG power wire from the battery
location to the amplifier mounting location,
taking care to route it in such a way that it
will not be damaged and will not interfere
with vessel operation. Use 2 AWG or larger
power wire and a power distribution block if
additional amplifiers are being installed with
the M800/8v2.
3) Connect power wire to the positive battery
post. Fuse the wire with an appropriate fuse
block (and connectors) within 18 inches (45
cm) wire length of the positive battery post.
This fuse is essential to protect the vessel.
Do not install the fuse until the power wire
has been securely connected to the amplifier.
4) Connect negative power wire to the negative
battery post. Use the same size power
wire as the wire connected to the โ€œ+12Vโ€
connection (minimum 4 AWG).
5) Run signal cables and remote turn-on wire
from the source unit to the amplifier
mounting location.
6) Run speaker cable from the speaker systems
to the amplifier mounting location.
7) Securely mount the amplifier.
8) Connect the positive and negative power
wires to the amplifier. A fuse near
the amplifier is not necessary if the
M800/8v2 is the only device being run
from the fused main power wire. If
the fused main power wire is shared
by the M800/8v2 and other amplifiers
or devices, fuse each amplifier/device
within 12 inches (30 cm) of wire length,
via a fused distribution block or multiple
individual fuse blocks/on-board fuses.
9) Connect the remote turn-on wire
to the amplifier.
10) Connect the input cables to the amplifier.
11) Connect the speaker cables to the amplifier.
12) Carefully review the amplifierโ€™s control
settings to make sure that they are set
according to the needs of the system.
13) Install the power wire fuse (80A for a
single M800/8v2) and reconnect the negative
battery post terminal. Install the fuse (80A)
near the amplifier (if applicable).
14) Turn on the source unit at a low level
to double-check that the amplifier is
configured correctly. Resist the temptation
to crank it up until you have verified the
control settings.
15) Make necessary adjustments to the input
sensitivity controls to obtain the right
overall output and the desired balance
in the system. See Appendix A (page 14)
for the recommended input sensitivity
setting method.
16) Enjoy the fruits of your labor with your


Product specificaties

Merk: JL Audio
Categorie: Receiver
Model: M800/8v2

Heb je hulp nodig?

Als je hulp nodig hebt met JL Audio M800/8v2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver JL Audio

Handleiding Receiver

Nieuwste handleidingen voor Receiver