JL Audio 10W3 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor JL Audio 10W3 (2 pagina's) in de categorie Auto subwoofer. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Congratulations on your purchase of a JL Audio subwoofer component. Your JL Audio subwoofer is a
precision loudspeaker which has been engineered to produce the highest quality sub-bass performance in
your vehicle. Authorized JL Audio dealers have extensive technical information for many different
applications of your new speaker. They also have the knowledge, skills and tools to build a high-quality
enclosure that will maximize the performance of your speaker. We highly recommend that you have
your enclosure built by an authorized JL Audio dealer.
Inside you will find specifications and two recommended enclosures for your speaker; one is a sealed
enclosure, the other is a ported design. Both types of enclosures will give you excellent sound quality and
low-frequency extension. The sealed enclosure is a better choice if space is extremely tight, but the ported
enclosure will produce 3dB more output at the same power if you have the extra space to work with.
If you decide to build one of these enclosures yourself, you must have the construction of the box
inspected and approved by your authorized JL Audio dealer in order for the 1 year limited warranty
to be valid. Please read the warranty information carefully.
8W3 10W3
Subwoofers
owner’s manual
JL AUDIO LIMITED WARRANTY (USA)
Automotive Subwoofer Components
JL AUDIO warrants this speaker to be free of defects in materials and workmanship for a period of one (1) year from the original date of purchase, contingent
upon installation being performed or approved by an authorized JL AUDIO dealer, in writing, on the original sales receipt. If the preceding condition is not met,
the warranty term is limited to ninety (90) days from the original purchase date.
This warranty is not transferrable and applies only to the original purchaser of the product from an authorized JL AUDIO dealer. Should service be necessary
under this warranty for any reason due to manufacturing defect or malfunction, JL AUDIO will, at its discretion, repair or replace the defective product with new or
remanufactured product at no charge.
Damage caused by the following is not covered under warranty: accident, misuse, abuse, product modification or neglect, failure to follow installation instructions,
unauthorized repair attempts, misrepresentations by the seller. This warranty does not cover incidental or consequential damages and does not cover the cost of
removing or reinstalling the unit(s). Cosmetic damage due to accident or normal wear and tear is not covered under warranty.
Any applicable implied warranties are limited in duration to the period of the express warranty as provided herein beginning with the date of the
original purchase at retail, and no warranties, whether express or implied, shall apply to this product thereafter. Some states do not allow limitations on implied warranties,
therefore these exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
If you need service on your JL AUDIO product:
All warranty returns should be sent to JL AUDIO freight prepaid through an authorized JL AUDIO dealer and must be accompanied by proof of
purchase (a copy of the original sales receipt.) Direct returns from consumers or non-authorized dealers will be refused unless specifically authorized by JL AUDIO
with a valid return authorization number. Warranty expiration on products returned without proof of purchase will be determined from the manufacturing date
code. Coverage may be invalidated as this date is previous to purchase date. Return only defective components. Non-defective items received will be returned freight-
collect. Customer is responsible for shipping charges and insurance in sending the product to JL AUDIO. Freight damage on returns is not covered under warranty.
Always include proof of purchase (sales receipt).
For Service Information in the U.S.A. please call:
JL Audio customer service: (954) 443-1100 during normal business hours (Eastern Time)
JL Audio, Inc
10369 North Commerce Parkway, Miramar, FL 33025
International Warranties:
Products purchased outside the United States of America are covered only by that country’s distributor and not by JL Audio, Inc.
Printed in USA JL8-10W3-02-2003
MEDIUM GRAY (MINIMUM):
From a reliability standpoint, this zone
represents a very comfortable operating
power range for each driver. This level of
power will not stress the woofer but will not
extract all of its performance potential, either.
Use of less than the minimum power level
will not damage the woofer, but may result
in unsatisfactory performance.
LIGHT GRAY (OPTIMUM):
This zone represents the best compromise
between long-term reliability, high-output and
low-distortion performance and is centered
on each woofer's continuous power rating (as
published in its specifications). In this zone, you
will be taking full advantage of the woofer's
optimum, low-distortion performance range
without undue risk of failure.
DARK GRAY (MAXIMUM):
In this zone, low-distortion output and
long-term reliability will be compromised
(especially by an aggressive user). Slightly
more SPL will be gained by pushing the
power into this zone, but typically not more
than 2dB, compared to the light gray zone.
The closer you are to the black zone, the
higher the likelihood of driver failure.
Operate with caution.
BLACK (WARRANTY VOID):
We do not recommend operating
woofers at this level of power. In this zone,
there is a very high probability that the
driver will fail due to excessive heat and/or
mechanical stress.
Subwoofer drivers operated at these
levels of power are NOT covered
under warranty.
JL Audio offers an extensive line of high-performance subwoofer drivers to fit a wide variety of enclosure and power applications. When designing systems with our
drivers, it is very important to achieve a good power match between the subwoofer amplifier and the subwoofer driver's capabilities. The power levels listed in the
above chart represent continuous (RMS) amplifier power per woofer and assume that the user will regularly make full use of that power without drastically
overdriving the amplifier(s). Make sure you factor system impedance and the total number of subwoofers into your calculations. Adhering to these power
recommendations will result in systems that are both reliable and enjoyable.
8W3
MED. GRAY:
MINIMUM
LIGHT GRAY:
OPTIMUM
DARK GRAY:
MAXIMUM
LEGEND:
BLACK:
WARRANTY VOID
30W 60W 125W 250W 500W 1000W
10W3
RECOMMENDED CONTINUOUS (RMS) POWER RANGE FOR ONE SUBWOOFER DRIVER:
SUBWOOFER: 8W3-D2 8W3-D4 8W3-D6 10W3-D2 10W3-D4 10W3-D6
Free Air Resonance (Fs): 34.3 Hz 35.3Hz 35.1 Hz 28.8 Hz 29.7 Hz 30.8 Hz
Electrical “Q” (Qes): 0.428 0.516 0.508 0.503 0.546 0.563
Mechanical “Q” (Qms): 6.850 6.850 6.850 8.260 8.260 8.260
Total Speaker “Q” (Qts): 0.403 0.480 0.473 0.474 0.512 0.527
Equiv. Compliance (Vas): 0.79 ft30.79 ft30.79 ft31.66 ft31.66 ft31.66 ft3
22.4 litres 22.4 litres 22.4 litres 38.6 litres 38.6 litres 38.6 litres
One-way, Linear Excursion: 0.39 in 0.39 in 0.42 in 0.549 in 0.579 in 0.513 in
(Xmax)* 9.9 mm 9.9 mm 10.7 mm 13.9 mm 14.7 mm 13.0 mm
Efficiency (1W/1m)**: 85.0 dB 84.6 dB 84.6 dB 85.3 dB 85.3 dB 85.6 dB
Effective Piston Area (Sd): 33.2 in233.2 in233.2 in253.5 in253.5 in253.5 in2
0.0214 m20.0214 m20.0214 m20.0345 m20.0345 m20.0345 m2
DC Resistance (Re)***: 3.396.5610.783.306.8210.98
Nominal Impedance: Dual 2Dual 4Dual 6Dual 2Dual 4Dual 6
Power Handling (continuous): 125W 125W 125W 250W 250W 250W
Mounting Depth: 4.25 in 4.25 in 4.25 in 5.8125 in 5.8125 in 5.8125 in
108 mm 108 mm 108 mm 148 mm 148 mm 148 mm
Mounting Hole Diameter: 7.0 in 7.0 in 7.0 in 9.125 in 9.125 in 9.125 in
178 mm 178 mm 178 mm 232 mm 232 mm 232 mm
Driver Displacement: 0.035 ft30.035 ft30.035 ft30.050 ft30.050 ft30.050 ft3
1.0 litres 1.0 litres 1.0 litres 1.4 litres 1.4 litres 1.4 litres
SUBWOOFER SEALED ENCLOSURE PORTED ENCLOSURE
Volume External Dimensions Volume External Dimensions Port
(net int.) (Width x Height x Depth) (net int.) (Width x Height x Depth) (Inside Dia. x Length)
8W3-D2 0.330 ft316" x 9" x 7.25" 0.75 ft315" x 10" x 13.75" 2.5" x 12.7"
9.35 litres 406mm x 229mm x 184mm 21.2 litres 381mm x 254mm x 349mm 64mm x 323mm
8W3-D4 0.375 ft316" x 9" x 8" 0.75 ft315" x 10" x 13.75" 2.5" x 11.9"
10.6 litres 406mm x 229mm x 203mm 21.2 litres 381mm x 254mm x 349mm 64mm x 302mm
8W3-D6 0.375 ft316" x 9" x 8" 0.75 ft315" x 10" x 13.75" 2.5" x 12.1"
10.6 litres 406mm x 229mm x 203mm 21.2 litres 381mm x 254mm x 349mm 64mm x 307mm
10W3-D2 0.625 ft318" x 11" x 9" 1.00 ft316" x 11" x 15.5" 3.0" x 14.5"
17.7 litres 457mm x 279mm x 229mm 28.3 litres 406mm x 279mm x 394mm 76mm x 368mm
10W3-D4 0.625 ft318" x 11" x 9" 1.125 ft316" x 11" x 17" 3.0" x 12.8"
17.7 litres 457mm x 279mm x 229mm 31.9 litres 406mm x 279mm x 432mm 76mm x 325mm
10W3-D6 0.75 ft318" x 11" x 10.5" 1.25 ft316" x 11" x 18.5" 3.0" x 11.3"
21.2 litres 457mm x 279mm x 267mm 35.4 litres 406mm x 279mm x 470mm 76mm x 287mm
RECOMMENDED ENCLOSURES
CAUTION
2JL AUDIO 8W3/10W3 JL AUDIO 8W3/10W3 3
SUBWOOFER SPECIFICATIONS
W3 VOICE COILS IN SERIES: W3 VOICE COILS IN PARALLEL:
AMPLIFIER
W3-D6: 12.0
W3-D4: 8.0
W3-D2: 4.0
AMPLIFIER
W3-D6: 6.0
W3-D4: 4.0
W3-D2: 2.0
AMPLIFIER
W3-D6: 4.0
W3-D4: 2.7
W3-D2: 1.3
AMPLIFIER
W3-D6: 3.0
W3-D4: 2.0
W3-D2: 1.0
AMPLIFIER
W3-D6: 1.5
W3-D4: 1.0
W3-D2: 0.5
AMPLIFIER
W3-D6: 1.0
W3-D4: 0.7
W3-D2: 0.3
*Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
**Efficiency (1W/1m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to
determine which one is “louder”.
***Re (DC resistance) is measured with the voice coils in series, for parallel-wired specification divide Re by 4. All other specifications remain the same.
The enclosure recommendations listed above
are external dimensions which assume the use
of 3/4" (19mm) thick material. If you are using
5/8" (16mm) thick material, subtract 1/4"
(6.5mm) from each dimension. Do not use any
material with a thickness of less than 5/8"
(16mm) as this may compromise the rigidity of
the enclosure.
All enclosure volumes listed above are net
internal volumes! Driver displacement, port
displacement and brace displacement must be
added to obtain the final gross internal volume.
All enclosure dimensions above have already
taken this into acount.
When using two subwoofers in a common
enclosure simply double the required volume
and, in the case of a ported enclosure, use two
times the recommended port(s). Likewise,
when using three subwoofers in a common
enclosure simply triple the required volume
and, in the case of a ported enclosure, use
three times the recommended port(s).
We recommend the use of this speaker in a
bi-amplified system using high-quality satellite
speakers and a high-quality amplifier. We do
not recommend the use of this subwoofer
with a passive crossover (coil), as this type of
device will adversely affect performance.
Prolonged exposure to sound
pressure levels in excess of 100dB
can cause permanent hearing loss.
This high-performance speaker can
exceed this level. Please exercise
restraint in its operation in order
to preserve your ability to enjoy
its fidelity.
When installing a subwoofer
in your vehicle, it is extremely
important to secure the enclosure
firmly. We recommend bolting the
enclosure through the metal of
the floorpan or the frame of the
vehicle with large diameter washers
for reinforcement. If an enclosure
is not firmly attached, it can
become a projectile in a collision.
This is particularly important in a
hatchback, station wagon, sports
utility vehicle, or van.
All specifications are subject to change without notice.


Product specificaties

Merk: JL Audio
Categorie: Auto subwoofer
Model: 10W3

Heb je hulp nodig?

Als je hulp nodig hebt met JL Audio 10W3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden