Jenn-Air JGD3536WS Handleiding

Jenn-Air Fornuis JGD3536WS

Lees hieronder de 📖 handleiding in het Nederlandse voor Jenn-Air JGD3536WS (24 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

30" (76.2 CM) AND 36" (91.4 CM) GAS DOWNDRAFT

COOKTOP INSTALLATION INSTRUCTIONS

INSTRUCTIONS D'INSTALLATION DE LA TABLE DE

CUISSON À GAZ À ASPIRATION PAR LE BAS

DE 30" (76,2 CM) ET DE 36" (91,4 CM)

COOKTOP SAFETY

W10526080A

Table of Contents/Table des matières

COOKTOP SAFETY........................................................................1

INSTALLATION REQUIREMENTS ................................................3

Tools and Parts ............................................................................3

Location Requirements ................................................................3

Venting Requirements..................................................................5

Venting Methods ..........................................................................6

Electrical Requirements ...............................................................7

Gas Supply Requirements ...........................................................8

INSTALLATION INSTRUCTIONS ..................................................9

Install Cooktop .............................................................................9

Rotate Blower - Optional..............................................................9

Make Gas Connection................................................................10

Electronic Ignition System..........................................................12

Complete Installation..................................................................12

SÉCURITÉ DE LA TABLE DE CUISSON .................................13

EXIGENCES D'INSTALLATION................................................14

Outillage et pièces...................................................................14

Exigences d'emplacement......................................................14

Exigences concernant l'évacuation ........................................16

Méthodes d'évacuation...........................................................17

Spécifications électriques .......................................................19

Spécifications de l'alimentation en gaz ..................................19

INSTRUCTIONS D’INSTALLATION .........................................21

Installation de la table de cuisson...........................................21

Rotation du ventilateur - Facultative.......................................21

Raccordement au gaz.............................................................22

Système d'allumage électronique...........................................24

Achever l'installation ...............................................................24

You can be killed or seriously injured if you don't immediately

You can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

IMPORTANT:

Installer: Leave installation instructions with the homeowner.

Homeowner: Keep installation instructions for future reference.

IMPORTANT :

Installateur : Remettre les instructions d'installation au propriétaire.

Propriétaire : Conserver les instructions d'installation pour référence ultérieure.

WARNING: If the information in this manual is not followed exactly, a fire or explosion

may result causing property damage, personal injury or death.

–Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this

or any other appliance.

–WHAT TO DO IF YOU SMELL GAS:

•Do not try to light any appliance.

•Do not touch any electrical switch.

•Do not use any phone in your building.

•Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

•If you cannot reach your gas supplier, call the fire department.

–Installation and service must be performed by a qualified installer, service agency or

the gas supplier.

WARNING: Gas leaks cannot always be detected by smell.

Gas suppliers recommend that you use a gas detector approved by UL or CSA.

For more information, contact your gas supplier.

If a gas leak is detected, follow the “What to do if you smell gas” instructions.

IMPORTANT: Do not install a ventilation system that blows air downward toward this gas cooking appliance. This type of

ventilation system may cause ignition and combustion problems with this gas cooking appliance resulting in personal injury or

unintended operation.

In the State of Massachusetts, the following installation instructions apply:

■ Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by

the State of Massachusetts.

■ If using a ball valve, it shall be a T-handle type.

■ A flexible gas connector, when used, must not exceed 3 feet.

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed

here.

Tools needed

Parts supplied

Parts needed

■Metal ducting

■Vent clamps

■Jenn-Air wall cap

Jenn-Air® 6" (15.2 cm) Round Surface Wall Cap Damper

Order Part Number A406

Jenn-Air® 3¼" x 10" (8.3 x 25.4 cm) Surface Wall Cap Damper

Order Part Number A403

To order, see the “Assistance or Service” section of the Use

and Care Guide.

Check local codes and consult gas supplier. Check existing gas

supply and electrical supply. See “Electrical Requirements” and

“Gas Supply Requirements” sections.

It is recommended that all electrical connections be made by a

licensed, qualified electrical installer.

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

When installing cooktop, use minimum dimensions given.

■It is the installer’s responsibility to comply with installation

clearances specified on the model/serial rating plate. The

model/serial rating plate is located on side of the downdraft

plenum.

■To eliminate the risk of burns or fire by reaching over the

heated surface units, cabinet storage space located above

the surface units should be avoided. If cabinet storage is to

be provided, the risk can be reduced by installing a range

hood that projects horizontally a minimum of 5" (12.7 cm)

beyond the bottom of the cabinets.

■The cooktop should be installed in a location away from

strong draft areas, such as windows, doors and strong

heating vents or fans.

■All openings in the wall or floor where cooktop is to be

installed must be sealed.

■Cabinet opening dimensions that are shown must be used.

Given dimensions are minimum clearances.

■Grounded electrical supply is required. See “Electrical

Requirements” section. Proper gas supply connection must

be available. See “Gas Supply Requirements” section.

■The cooktop is designed to hang from the countertop by its

side or rear flanges.

■The gas and electric supply should be located as shown in

“Cabinet Dimensions” section so that they are accessible

without requiring removal of the cooktop.

■Provide cutout in right rear corner of cutout enclosure as

shown to provide clearance for gas inlet, power supply cord,

and to allow the rating label to be visible.

■If cabinet has drawers, drawers will need to be removed and

drawer fronts installed on front of cabinet.

IMPORTANT: An undercounter built-in oven cannot be installed

under this product.

IMPORTANT: To avoid damage to your cabinets, check with your

builder or cabinet supplier to make sure that the materials used

will not discolor, delaminate or sustain other damage.

Mobile Home - Additional Installation Requirements

The installation of this cooktop must conform to the

Manufactured Home Construction and Safety Standard, Title 24

CFR, Part 3280 (formerly the Federal Standard for Mobile Home

Construction and Safety, Title 24, HUD Part 280). When such

standard is not applicable, use the Standard for Manufactured

Home Installations, ANSI A225.1/NFPA 501A or local codes.

■In Canada, the installation of this cooktop must conform with

the current standards CAN/CSA-A240-latest edition, or with

local codes.

Product Dimensions

30" (76.2 cm) Cooktop

■Tape measure

■Flat-blade screwdriver

■Phillips head screwdriver

■Drill

■Level

■6" (15.2 cm) socket

extension

■Marker or pencil

■Pliers

■¼" drill bit

■Jigsaw

■Ratchet with ³⁄₈" socket

■Pipe-joint compound

resistant to LP gas

■Noncorrosive leak-detection

solution

■Vent grill

■Pre-filter

■LP conversion kit

■Burner caps

■Burner grates

■Pressure regulator

A. 21½" (54.6 cm)

B. 19

¹¹⁄₁₆

" (50.0 cm)

C. Model/serial rating plate location

Product specificaties

Merk:	Jenn-Air
Categorie:	Fornuis
Model:	JGD3536WS
Apparaatplaatsing:	Ingebouwd
Soort bediening:	Draaiknop
Kleur van het product:	Zilver
Ingebouwd display:	Nee
Breedte:	914 mm
Diepte:	546 mm
Hoogte:	34 mm
Soort materiaal (bovenkant):	Roestvrijstaal
Aantal branders/kookzones:	5 zone(s)
Type kookplaat:	Gaskookplaat
Makkelijk schoon te maken:	Ja
Aantal gaspitten:	5 zone(s)
Normale brander/kookzone:	- W
Controle positie:	Rechtsboven
Installatie compartiment breedte:	877 mm
Installatie compartiment hoogte:	102 mm
Installatie compartiment diepte (min):	500 mm
Aantal gelijktijdig te gebruiken kookzones:	5