JBL GT5-12 Handleiding

JBL Autospeaker GT5-12

Lees hieronder de 📖 handleiding in het Nederlandse voor JBL GT5-12 (4 pagina's) in de categorie Autospeaker. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

THANK YOU

for purchasing a JBL®GT Series™subwoofer. Subwoofer

installation requires woodworking skills and some experience

in disassembling and reassembling automotive interiors. If

you lack the tools or necessary skills, have your subwoofer

installed by an authorized JBL dealer.

GT SERIES™

GT5-10

GT5-12

GT5-15

r a

o s

r’

’

’s

s m

CHOOSING AN ENCLOSURE

:Playing loud music

in an automobile can permanently

damage your hearing, as well as

hinder your ability to hear trafﬁc.

We recommend listening at low

levels while driving. JBL accepts no

liability for hearing loss, bodily injury

or property damage resulting from

use or misuse of this product.

GT Series subwoofers are optimized

to perform best in small, sealed,

vented and prefabricated band-pass

enclosures. While inﬁnite-bafﬂe

mounting of GT Series subs is possi-

ble, power handling will be greatly

compromised because there’s no

enclosed volume of air to prevent

the speaker’s cone from moving

past its limit. For this reason, we

do not recommend inﬁnite-bafﬂe

mounting for GT Series subwoofers.

You should choose the enclosure

you will use based on the type of

music you listen to, how much

ampliﬁer power you will use for the

subwoofer and how much space

inside the vehicle you can devote

to a subwoofer enclosure.

Because a sealed enclosure

provides the most control over

the woofer’s movement, a woofer

mounted in a sealed enclosure will

handle more power than a woofer

mounted in another enclosure type.

Sealed enclosures provide more-

accurate sonic reproduction than

other enclosure types when

mounted inside a vehicle, so they

are well suited to all types of music.

Sealed-enclosure construction is

straightforward, and there are many

prefabricated sealed enclosures

available. An optimum sealed

enclosure is always smaller than

other types of enclosures optimized

for a particular speaker, so they

require the smallest amount of

space inside the vehicle.

Vented enclosures provide better

efﬁciency in the 40Hz– 50Hz range,

but this efﬁciency comes at the

expense of sound in the lowest

octave (below 40Hz) and at the

expense of some control and power

handling at the lowest frequencies.

If you are using a small ampliﬁer,

a vented box will provide more

perceived bass output from less

power. Vented enclosures are also

well suited to a variety of music

types. Because vented enclosures

require the volume of the enclosure

and the size of the port to have

a speciﬁc relationship with the

characteristics of the woofer, the

enclosure must be built toexactly

the speciﬁcations provided. While

there are some prefabricated

vented boxes available, matching

a prefabricated box to a particular

woofer is difﬁcult. If you wish to

use a vented enclosure, we strongly

recommend having your authorized

JBL dealer build it or verify that your

design is correct if you wish to build

it yourself. An optimum vented

enclosure is always larger than the

optimum sealed box for the same

woofer and will require more space

inside the vehicle.

Band-pass enclosures often provide

the most output available from any

ampliﬁer and subwoofer combination,

at the expense of sonic accuracy.

If sheer SPL (sound-pressure level)

is what you desire most, choose a

band-pass enclosure. Band-pass-

enclosure design is very tricky, and

the aid of a computer and enclosure

design software is necessary. If you

are an experienced installer or have

some woodworking experience,

you may wish to build the band-pass

enclosure described in the enclosure

design sheet included with this

woofer. Fortunately, there are many

prefabricated band-pass boxes

available, and they are all optimized

to extract the most output possible

from any woofer. Band-pass

enclosures can be quite large and

may require a lot of space inside

your vehicle.

Each GT5 subwoofer has a single

4-ohm voice coil. Be sure to consider

your ampliﬁer’s optimum load when

designing a subwoofer system. Many

bridgeable 2-channel ampliﬁers are

optimized to drive a single 4-ohm

woofer in bridged mode. If you will

use multiple woofers, be sure to

conﬁgure them to extract all the

power available from your ampliﬁer.

When designing a subwoofer system,

consider the following rules:

1. Do not mix different subwoofers

or enclosure types in the same

system. Subwoofers being used in

the same enclosure or powered

by the same ampliﬁer should

be identical models. Mismatched

woofers and enclosures can

result in poor system performance.

2. Most ampliﬁers deliver exactly

the same amount of power

bridged into a 4-ohm load

as they do driving a 2-ohm

stereo load.

3. If you are designing a multiple-

woofer system, be sure to conﬁgure

the woofers so that they each

receive the same amount of

power from the ampliﬁer. Never

connect two identical woofers in

series and then connect that pair

to another woofer in parallel. If

your system will include an odd

number of woofers, be sure to

connect the woofers in all either

series or parallel according to

the rules that follow, in order to

maximize the power available

from your ampliﬁer:

a. The total system impedance

of voice coils (or woofers) in

series can be calculated using

the formula:

Impedance = w1+ w2+ w3...

b. The total system impedance

of woofers in parallel can be

calculated using the formula:

Impedance = 1

1+1+1...

w1w2w3

where w is the nominal

impedance of the woofer.

The diagrams at right show series

and parallel speaker connections.

Figure 1. Connecting two woofers

in series to the ampliﬁer (8 ohms)

Figure 2. Connecting two woofers in

parallel to the ampliﬁer (2 ohms)

CONNECTING YOUR SUBWOOFER TO YOUR AMPLIFIER

Red

Positive

Black

Negative

Red

Positive

Black

Negative

To Amp

Positive

To Amp

Negative

Connection of single woofer (4 ohms)

Red

Positive Black

Negative

Red

Positive Black

Negative

To Amp

Positive To Amp

Negative

g ( )

Product specificaties

Merk:	JBL
Categorie:	Autospeaker
Model:	GT5-12
Kleur van het product:	Zwart
Breedte:	- mm
Diepte:	- mm
Hoogte:	- mm
Installatie compartiment diepte:	164 mm
Diameter:	313 mm
Gemiddeld vermogen subwoofer:	275 W
Aantal drivers:	1
Diameter driver subwoofer (imperiaal):	12 "
Subwoofertype:	Passieve subwoofer
Frequentiebereik subwoofer:	27 - 450 Hz
Impedantie subwoofer:	4 Ohm
Subwoofer sensitiviteit:	90 dB
Spreekspoel types:	Duale 4-lager
Type product:	Subwoofer-stuurprogramma
Diameter driver subwoofer:	305 mm
Subwoofer maximale vermogen:	1100 W
Diameter spreekspoel:	51 mm
Volume Acoustic Compliance (VAS):	54.2 l
Bewegende massa (Mms):	216 g
Inductantie spreekspoel (Le):	1.26 mH
Mechanische Q-factor (Qms):	6.39
Elektrische Q-factor (Qes):	0.64
Totale Q-factor (Qts):	0.58
Piek excursie (Xmax):	14.2 mm