JBL Control 29AV Handleiding

JBL Speaker Control 29AV

Lees hieronder de 📖 handleiding in het Nederlandse voor JBL Control 29AV (10 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/10
Control 29AV-1Premium Indoor/Outdoor
Monitor Speaker
®
Key Features:
䉴 Extremely smooth, fl at frequency
response with extended bandwidth.
䉴 110° x 85° HF coverage, rotatable horn.
䉴 110 Watt transformer for 70V or 100V
lines, with 8 thru.Ω
䉴 SonicGuard™ overload protection.
䉴 200 mm (8 ) Kevlar cone woofer, ⬙
25 mm (1 ) titanium diaphragm ⬙
compression driver.
䉴 Includes InvisiBall™ mounting hardware,
plus ten 6 mm attachment points for
suspension and optional U-bracket.
䉴 Sealed input panel cover and screw-
down input terminals.
The Control® 29AV-1 provides improved
voicing for extremely fl at, high fi delity
performance, extended bandwidth and
well-controlled defi ned coverage from a
compact loudspeaker.
The rotatable high-frequency horn
allows use of the speaker in either vertical
or horizontal orientation. Consistent
coverage ensures excellent sound
character throughout the listening area.
Moderate magnetic shielding allows use
of the speaker as close as 230 mm (9 ) to ⬙
video monitors.
The top-quality line distribution
transformer, designed for minimal insertion
loss and reduced saturation, allows
use of either 70V or 100V distributed
speaker lines. In bypass position, the 8 Ω
impedance allows use of multiple speakers
on a loudspeaker line.
The included InvisiBall mounting
method is simple to install, aims easily and
provides a high degree of theft deterrence.
InvisiBall allows horizontal rotation of up
to 41° off-axis and vertical rotation of up
to 36° (horn end inward) or 23° (woofer
end inward). Attachment points for the
optional MTC-29UB U-bracket allows for
compact installation.
Weather resistance has been maximized.
The woofer’s cone is made of kevlar,
surround is pure butyl rubber, and the
driver basket is rear loaded to minimize
direct exposure. The compression driver’s
diaphragm is pure titanium. The grille is
thermoset composite coated and comes
with foam to minimize incursion of water.
Nickel/zinc rust-resistant terminals ensure
a secure input connection. An MTC-PC2
sealed-entrance cover is included to
further protect the speaker’s terminals.
JBL’s exclusive SonicGuard overload
protection is virtually inaudible to the
listener, ensuring reliability while
providing full fi delity sound.
Available in black or white (-WH). The
cabinet will accept a variety of paints to
match any décor.
Professional Series
Specifi cations:
Frequency Range (-10 dB)1: 37 Hz –18 kHz
Frequency Response (± 3 dB)1: 43 Hz – 15 kHz
100 Hr Power Capacity 2: 300 Watts Continuous Program Power
150 Watts Continuous Pink Noise
Maximum SPL @ 1m3: Short-Term: 118 dB; Long-Term: 112 dB
Nominal Sensitivity4: 90 dB, 1W @ 1 m (3.3 ft)
Nominal Coverage Angle5: 110° H x 85° V, rotatable
Directivity Factor (Q): 6.7, averaged 500 Hz to 16 kHz
Directivity Index (DI): 8.3 dB, averaged 500 Hz to 16 kHz
Nominal Impedance: 8 ohms
Minimum Impedance: 6.3 ohms @ 230 Hz 3.3 ohms @ 4.1 kHz
Crossover Type: 3rd order High Pass, 2nd order Low Pass with
impedance compensation, 2.5 kHz crossover
frequency
Transformer Taps: 70V: 110W, 55W, 28W & 14W
100V: 110W, 55W, & 28W
Thru Position: 8 nominalΩ
Recommended High-Pass: See chart
Transducers:
Low Frequency: 200 mm (8 in) kevlar cone with pure butyl rubber
surround, 50 mm (2 in) voicecoil on fi berglass
former
High Frequency: 25 mm (1 in) compression driver, pure titanium
diaphragm with patented JBL diamond surround
Physical:
Enclosure Material: High impact polystyrene
Grille: Thermoset composite coated steel
Overload Protection: Full-range power limiting to protect network and
transducers. Serviceable internal fuse to protect
during extreme overload conditions.
Environmental: IEC 529 IP-X4 splashproof rating. Exceeds MilSpec
810 for humidity, salt spray, temperature & UV.
Passes Mil-Std-202F for salt spray.
Termination: Screw-down terminal strip, zinc plated copper
base, nickel plated metal screws/washers. Accepts
up to 9 mm outside 4 mm inside open lug (#6, #8
or #10 lug), plus bare wire (up to 12 AWG/2.5 mm 2).
Safety Agency Rating: Transformer is listed per UL1876.
Colors: Black or white (-WH)
Dimensions (H x W x D): 520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in)
Net Weight (ea): 12.2 kg (26.8 lbs)
Shipping Weight (ea): 14.0 kg (30.8 lbs)
Included Accessories: 1 pc MTC-PC2 input panel cover, InvisiBall
mounting base, 6 mm x 260 mm InvisiBall Hex
wrench.
Optional Accessories: MTC-29CM to install speaker down from the ceiling
MTC-29UB U-bracket
1 In Half-space.
2 Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously. Continuous
program power is defi ned as 3 dB above the Continuous Pink Noise Rating and is a conservative expression of the system’s
ability to handle normal speech and music program material.
3 Calculated from sensitivity and power handling. Power compression not considered.
4 Half-space, averaged 100 Hz to 10 kHz 5
2 kHz to 14 kHz
JBL continually engages in research related to product improvements. Changes introduced into existing products without
notice are an expression of that philosophy.
Horizontal Off Frequency
Vertical Off Axis Frequency Response (down)
Vertical Off Axis Frequency Response (up)
Frequency Response, on axis in half space (2 , dotted π
line) and full space (4 , solid line) at thru (8 ) setting, π Ω
Input Impedance.
Directivity Index, Q
Beamwidth vs. Frequency
Dimensions in inches [mm]
䉴 Control® 29AV-1 Premium Indoor/Outdoor Monitor Speaker
10
100
360
20 100 1000 10000 20000
-6 dB Beamwidth (degrees)
Frequency (Hz)
Horizontal
Vertical
Horizontal 1/3 Octave Polars
Architectural Specifi cations:
The loudspeaker shall consist of a 200 mm (8 in) low frequency
transducer, 25 mm (1 in) compression driver, and frequency dividing
network. The low frequency driver’s voice coil shall be 50 mm (2 in) in
diameter.
Performance specifi cations of a typical unit shall be as follows: Usable
frequency response shall extend from 37 Hz to 18 kHz (10 dB below
rated sensitivity, half-space, no external equalization). Rated power shall
be at least 300 watts continuous program power for 100 continuous
hours duration (defi ned as 3 dB above a test signal of fi ltered random
pink noise conforming to IEC268-5). Measured sensitivity shall be at
least 90 dB-SPL (at 1 m [3.3 ft] with 2.83 V input, ave. 100 Hz to 10 kHz).
The input shall be switchable for use either at nominal 8 ohms, or on
a 70.7V or 100V distributed speaker line via built-in transformer.
Selectable taps shall nominally be 110W, 55W, or 28W on either a 70.7V
or 100V distributed speaker line, plus 14W on 70.7V line only.
The system shall be protected against damage from occasional
overpowering via full range limiting, which shall be inaudible during
activation. The compression driver shall be horn-loaded to cover 110
degrees by 85 degrees with a high degree of accuracy and the horn shall
be rotatable to achieve these coverages either in the horizontal or
vertical planes, regardless of cabinet orientation.
The cabinet and grille shall be paintable. The grille shall be secured
via screws to keep it in place when facing downward.
The low frequency transducer shall have woven kevlar cone and butyl
rubber surround, with the frame protected from direct weather
exposure. The compression driver shall be constructed with a titanium
diaphragm for weather resistance. The system shall withstand Mil Spec
810 testing with specifi ed durations with no effect on its acoustical
performance or structural integrity: salt spray (method 509.3), tempera-
ture (method 501.3 and 502.3), humidity (method 507.3) and ultraviolet
(method 505.3). Further, it shall pass Mil-Std-202F (method 101D) for salt
spray. The system shall have an IEC 529 splashproof rating of IP-X4.
For theft-deterrence, the installation access area shall be hidden
behind a snap-out cover on the front grille. The included ball mecha-
nism shall be internal to the cabinet. The cabinet shall have ten (10) 6 mm
mounting points, including 2 on each side and 3 on top and bottom and
an accessory U-bracket shall be available. The grille logo shall be
rotatable for proper orientation with loudspeaker mounted horizontally
or vertically.
The external wiring connectors shall be screw-down terminals. Overall
cabinet dimensions shall be no greater than 520 mm high x 306 mm
wide x 277 mm deep (20.5 x 12.0 x 10.9 in) and shall weigh no more
than 12.2 kg (26.8 lb). The fi nish shall be lightly textured black or white.
The system shall be the JBL Model C29AV-1 (or C29AV-WH-1) with
included InvisiBall® (mounting system).

Product specificaties

Merk: JBL
Categorie: Speaker
Model: Control 29AV

Heb je hulp nodig?

Als je hulp nodig hebt met JBL Control 29AV stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker JBL

JBL

JBL CSS-H15 Handleiding

10 December 2024
JBL

JBL Stage1 621 Handleiding

8 December 2024
JBL

JBL SVA1500 Handleiding

25 November 2024
JBL

JBL Venue Voice Handleiding

25 November 2024
JBL

JBL Venue Stage Handleiding

25 November 2024
JBL

JBL Venue Monitor Handleiding

25 November 2024
JBL

JBL Venue Arena Handleiding

25 November 2024
JBL

JBL Venue Stadium Handleiding

25 November 2024
JBL

JBL Venue Balcony Handleiding

25 November 2024
JBL

JBL Venue Tour Handleiding

25 November 2024

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Kanto

Kanto REN Handleiding

11 December 2024
Phonic

Phonic JUBI 12A LITE Handleiding

11 December 2024
Phonic

Phonic aSK215 Handleiding

11 December 2024
Phonic

Phonic iSK 8 Deluxe Handleiding

11 December 2024
Phonic

Phonic SAFARI 1000 LITE Handleiding

11 December 2024
Phonic

Phonic SAFARI 2000P Handleiding

11 December 2024
Phonic

Phonic iSK 15 Handleiding

11 December 2024
Phonic

Phonic JUBI 12 Handleiding

11 December 2024
Pro-Ject

Pro-Ject Speaker Box 3E Carbon Handleiding

11 December 2024
MB

MB PESSPROVS32A Handleiding

11 December 2024