Jamo S7-15B Handleiding

Jamo Speaker S7-15B

Lees hieronder de 📖 handleiding in het Nederlandse voor Jamo S7-15B (5 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
The Studio7 is our new range of loudspeakers developed to revitalise the Jamo brand, whilst bringing a new level
of quality to the consumer. The result is a range that not only sounds excellent but is also visually striking and
undeniably Scandinavian. The range owes its name to the 7° tilt that helps the products look so distinctive. Our
engineers have used top tier components, expertly voiced and validated with countless hours of listening to bring you
a rare combination of both aesthetics and audio performance unrivalled in its class. Welcome to the Studio7.
S T U D I O 7 S E R I E S
©GettyImages - Felix Pergande
EUROPEAN DESIGN - SCANDINAVIAN ROOTS
With its minimalist aesthetic, clean lines and meticulous attention to detail, the Studio7 series
is a great example of form following function and ushers in a new era of performance for
Jamo. Brimming with technical innovation our design team have created a speaker that is
timeless and would grace any home. Inspired by nature the Studio7 series is a tribute to our
two founders, Preben Jacobsen and Julius Mortensen.
CRYSTAL CLEAR HIGHS
The high frequency duties are carried out by the all new 1-inch tweeter unit featuring a
copper faraday ring which increases sensitivity and reduces non-linear distortion. The tweeter
and surround is made from fabric and exhibits excellent distortion characteristics and wide
bandwidth, for a non-fatiguing yet detailed sound.
The High Frequency waveguide was optimised using Jamo’s exclusive COMSOL software
model. Validation of the waveguide and tweeter performance was achieved through countless
hours of real-world testing to ensure consistency, reliability and performance even at high
sound pressure levels for extended periods.
NATURAL BASS
The bass drivers feature embossed paper cones, high strength motor assemblies incorporating
aluminium inductance shorting rings that both enhance power handling and lower distortion.
The aluminium shorting ring lowers distortion for clean, dynamic bass and increases power
handling as the aluminium ring acts as a heat sink.
The embossed paper cone with « Thor’s Hammer » detailing increases the rigidity to improve
the transient response for that snappy yet natural bass.
7° TILTED CABINET – A DISTINCTIVE DESIGN FOR A NEW SOUND EXPERIENCE
7 really is the magic number for the new Studio7. To ensure a coherent sound stage, we ha
time aligned the acoustic centres of the drive units by tilting the cabinet back and mounting
on a plinth that houses the speaker crossover. This helps minimise any timing anomalies th
can occur in a more traditional enclosure.
The Studio7 S7-15B are very compact speaker designed for use in smaller rooms and still delivering incredible
audio performance. Thanks to their small form factor, they can be installed on a traditional speaker stand or
cabinet as bookshelf speakers or wall mounted as a surround speaker in a home theater system. (A separate
dedicated wall mounting bracket system can be purchased separately). The S7-15B shares the same 1-inch fabric
dome tweeter and 5.5-inch woofer as the S7-25F which assures outstanding performance from low bass through
to the extended high frequency. These compact speakers are equally at home with both movies and music.
S7-15B BOOKSHELF SPEAKER
7°
REDUCING DIFFRACTION
When a speaker driver produces sound, some energy is spread across the bae of the speaker
towards the edge of the cabinet. If that energy hits a hard cabinet edge, a smaller version of
this energy is reflected back towards the driver causing a time shifted, low level signal that can
corrupt the sound of the driver leading to distortion. By rounding the cabinet edge, this energy
gently dissipates more naturally, and does not colour the signal being produced by the driver.
QUIET CABINET FOR INCREASED RESOLUTION
The Jamo Studio speakers’ cabinet walls are thicker (15 mm MDF with 18 mm Front bae)
and critically braced to ensure a low degree of « self-noise ». This allows you to hear more
low-level detail and increases resolution when playing at any output level compared to
competing products in their class. In short, you get to hear more of what you want and less of
what you don’t.
HIGH QUALITY CROSSOVER
The crossover is housed in its own sealed plinth to minimise the possibility of any interaction
between the large bass driver magnet and the inductors in the crossover. Special attention was
paid to the topology and component selection. Mylar and non-polarised electrolytic capacitors
are used along with both iron and air core inductors and 25 W resistors to perfectly blend the
speaker drivers achieving the highest level of transparency throughout the audio band.
2 COLOURS – INSPIRED BY NORDICS NATURE
Our colours have been chosen from the chromatic palette of Scandinavian landscapes: the
dark blue is inspired by the Norwegian fjords and the grey cloud from the fog hanging over a
Finnish forest. Our signature blue fjord brings an emotional touch to your interior whilst Grey
cloud integrates seamlessly into the modern home.
The Jamo Studio7 will enhance your living space no matter which colour you choose.
STUDIO7 IS ALL ABOUT HYGGE
Hygge - « To create a warm atmosphere and enjoy the good things in life with family and
friends. » So, seat comfortably, relax and enjoy a sound as pure as Scandinavian air.
S7-15B BOOKSHELF SPEAKER


Product specificaties

Merk: Jamo
Categorie: Speaker
Model: S7-15B

Heb je hulp nodig?

Als je hulp nodig hebt met Jamo S7-15B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Jamo

Handleiding Speaker

Nieuwste handleidingen voor Speaker