Ion Block Party Handleiding

Ion Speakers Block Party

Lees hieronder de 📖 handleiding in het Nederlandse voor Ion Block Party (20 pagina's) in de categorie Speakers. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

BLOCK PARTY

Quickstart Guide

English ( 2 – 3 )

Guía de inicio rápido

Español ( 4 – 5 )

Guide d'utilisation rapide

Français ( 6 – 7 )

Guida rapida

Italiano ( 8 – 9 )

Kurzanleitung

Deutsch ( 10 – 11 )

Snelstartgids

Nederlands ( 12 – 13 )

Snabbstartsguide

Svenska ( 14 – 15 )

Pikakäyttöopas

Suomi ( 16 – 17 )

Appendix

English ( 18 )

Quickstart Guide (English)

Support

For product registration, visit the ION website: ionaudio.com

For the latest information about this product, visit

ionaudio.com/blockparty

For additional product support, visit ionaudio.com/support

For safety/warranty information, visit ionaudio.com/warranty

WARNING: DO NOT splash or immerse in water or other liquids.

Not for use in rain. Use only in dry locations.

WARNING: DO NOT look directly into the dome light.

Do not sit, stand, or apply pressure on the dome light.

Rechargeable Batteries

Rechargeable lead-acid batteries are the same type used in automobiles. As with your car battery, how you use this

battery has a significant impact on its lifespan. With proper use and treatment, a lead-acid battery can last for years.

Here are some recommendations for getting the longest life from the internal battery.

GENERAL USAGE

• FULLY CHARGE THE BATTERY BEFORE USING IT.

• CHARGE THE BATTERY COMPLETELY AFTER EACH USE.

STORAGE

• For best product longevity, do not store at exceedingly hot (greater than 90F (32C)) or exceedingly cold

(less than 32F (0C)) temperatures.

• It is acceptable to leave your sound system plugged in. This will not overcharge the battery.

• If you leave the battery level low and do not charge it for 6 months, it may permanently lose capacity.

REPAIR

• If the battery fails to charge, check your fuse near the power cable input. If your fuse is intact and it still

will not charge, contact ION Audio at ionaudio.com.

DISPOSAL

• Bring the unit to a recycling center or dispose of in accordance with local ordinances.

Quick Setup/Connection Diagram

1. Make sure all items listed in Box Contents at the beginning of this guide are included in the box.

2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.

3. For optimal performance, place Block Party in the center of the room so it is unobstructed by walls, furniture,

etc.

4. Move Light Mode switch to OFF.

5. Turn down the Master Volume on the Block Party.

6. Turn on Block Party.

7. Connect your music player with an audio cable or Bluetooth. (see Connecting with a Bluetooth Device for more

details on this)

8. Adjust the volume on your music player and on Block Party as needed.

9. Adjust the Light Mode switch on Block Party as needed.

10. Turn off Block Party when not in use.

BOX CONTENTS

 Block Party

 Microphone with mic cable

 Audio Cable with 1/8” (3.5mm)

connectors

 Power Cable (standard IEC)

 Quickstart Guide

 Safety Instructions & Warranty

Information Booklet

TOP PANEL

MICROPHONE

MP3 PLAYER

(not included)

MICROPHONE

REAR PANEL

POWER

Diagram and Parts Description

1. Microphone Input with Volume

Control (1/4"): This mono input

accepts a 1/4" input such as a

microphone, guitar, or other musical

instrument.

2. Auxiliary input: This stereo 1/8”

input can be used to connect a

smartphone, MP3 player, or other

audio source.

3. Bluetooth: The Paired LED will be

lit when a device is paired to Block

Party. This LED will not be lit when

Block Party is first powered on

(unless it was previously paired with a device). Press the

Disconnect button to disconnect a paired Bluetooth

device.

4. Master Volume Control: This adjusts the speaker’s

main mix volume, which includes Microphone Input,

Auxiliary Input, and the audio of a paired Bluetooth device.

5. Power LED: Indicates whether Block Party is on or off.

6. Light Mode: There are three modes to select from for how the

strobe lights react to the music.

• Beat = the light reacts to the beat of the music.

• Party = dome light spins and changes color whether there

is music playing or not.

• Off = the light is off and the lights in the dome are not

spinning.

7. Dome: The dome light can spin and react to the music playing

(depending on the Light Mode that is selected).

8. Power Cable Input (IEC): Insert the included power cable here

to power the unit.

9. Power ON/OFF Switch: Turns Block Party on or off.

10. Battery Level Indicator: While the unit is powered ON and the

unit is not plugged in, these four lights indicate the power left in

the battery. Battery life varies based on volume and usage.

11. Charging LED – This illuminates when the unit is attached to

wall power and is in the process of charging.

Troubleshooting

If the sound is distorted: Try lowering the volume control of your sound source or musical instrument. Also, try to

reduce the overall volume of Block Party.

If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level. This

will allow you to play the music louder before clipping (distortion) occurs.

If there is a high-pitched whistling noise when using microphones: This is probably feedback. Point the

microphone away from the speaker.

If you can’t hear the microphone over the music volume: Turn down the music volume from your source.

Connecting with a Bluetooth Device

1. Turn on your Bluetooth device.

2. Power on Block Party and it will automatically go into pairing mode to search for Bluetooth devices. You will

know you are in pairing mode when the LED is off.

3. If your Bluetooth device is not able to pair to the amp, press the disconnect button on the amp to break

previous Bluetooth connections and reset the Bluetooth module.

4. Navigate to your Bluetooth device’s setup screen, find “ION Speaker” and connect.

Note: If your Bluetooth device prompts for a pairing code, enter ‘0000’.

5. The Paired LED will light up solid when it is 'paired'.

Note: If you experience trouble pairing or playing music, update your device's OS.

6. To disconnect pairing, press the ‘Disconnect’ button on Block Party.

7. To connect to another Bluetooth device, repeat steps 3-4.

Note: Maximum range will be achieved when using devices with Bluetooth 4.0.

*WARNING: Do not look directly into the

dome light. Do not sit, stand, or apply

pressure on the dome light.

Product specificaties

Merk:	Ion
Categorie:	Speakers
Model:	Block Party
Kleur van het product:	Zwart
Gemiddeld vermogen:	50 W
Impedantie:	- Ohm
Frequentiebereik:	- Hz
Luidspreker soort:	1-weg