Intellinet Wireless B Router 523233 Handleiding

Intellinet Router Wireless B Router 523233

Lees hieronder de 📖 handleiding in het Nederlandse voor Intellinet Wireless B Router 523233 (20 pagina's) in de categorie Router. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
802.11b Wireless Router
User Manual
FCC Certifications
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. The equipment version marketed in US is restricted to usage of the channels 1-11
only. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End
users must follow the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The equipment version marketed in US is restricted to usage of the channels 1-11 only
CE Mark Warning
This equipment complies with the requirements relating to electromagnetic compatibility, EN55022 class B for
ITE, the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of
the Member States relating to electromagnetic compatibility.
Company has an on-going policy of upgrading its products and it may be possible that information in this
document is not up-to-date. Please check with your local distributors for the latest information. No part of this
document can be copied or reproduced in any form without written consent from the company.
Trademarks:
All trade names and trademarks are the properties of their respective companies.
Copyright © 2003, All Rights Reserved.
Document Version: 2.0
Table of Contents
Unpacking Information············································································· 1
Introduction To Wireless Router ······························································ 2
General Description················································································· 2
Key Features ························································································· 3
The Front Panel······················································································ 4
System LEDs ················································································· 4
Port LEDs (WAN)············································································ 4
Port LEDs (LAN) ············································································· 4
Port LEDs (Wireless) ······································································· 5
Factory Setting button······································································ 5
The Rear Panel ······················································································ 6
Power Connection ··········································································· 6
Placement (Optional) ······································································· 6
Installing And Using Wireless Router······················································ 8
Network configuration setup··································································· 8
Computer configuration setup································································· 9
Wireless Router configuration setup······················································ 14
Status························································································ 15
Wireless····················································································· 17
TCP/IP Setting············································································ 24
Firewall Configuration·································································· 29
Syslog ······················································································· 33
Statistics···················································································· 34
Upgrade Firmware ······································································ 34
Save and Reload ········································································ 35
Password··················································································· 35
Product Specifications ··········································································· 36
Appendix································································································· 37
1
Unpacking Information
Thank you for purchasing the Wireless Router. Before you start, please check all the
contents of this package.
The product package should include the following:
1. One Wireless Router
2. One power adapter
3. One User Manual (CD)
4. One QIG
5. Stand and Screws (Optional)
2
Introduction To Wireless Router
General Description
The Wireless Router built-in with 4-port 10/100Mbps Fast Ethernet Switch
is the latest generation of Wireless router product for Home/Office and SOHO
users who are thirsting high speed Internet access. This full-feature and
self-contained compact Wireless Router will be fully for broadband access in
both of LAN and Wireless environment. This device has been specifically
designed to provide LAN and Wireless users the most cost-effective method with
multiple accesses to the Internet at the cost of a single public IP addressIP
Sharingand enjoy the true Plug-and-Play installation. Moreover, the built-in
4-port 10/100Mbps switch lets users plug the network cable into the device
without buying additional switch.
This device is also an Access Point. It has a built-in wireless LAN. Users
can connect to Internet using wireless network interfaces anywhere within the
range of its radio transmission. It’s idea for SOHO users who require instant and
convenient access to Internet without the restriction of connecting cables.
The friendly WEB-based graphics interface for setup makes any
inexperienced users soon enter plug-and–play operation. Embedded DHCP
server simplified IP address management and no MIS people needed for daily
technical services. What is more, NAT/firewall is also implemented on this
compact Router Box for protecting whole LAN from outside attack.
3
Key Features
The switch provides the following key features:
- Complies with 10BASE-T specifications of IEEE802.3 standard
- Complies with 100BASE-TX specifications of IEEE802.3u standard
- Complies with IEEE802.3x full duplex operation and flow control
- 4 * RJ-45 ports for 100BASE-TX and 10BASE-T connectivity on LAN side
- 1 * WAN port on WAN side
- Friendly GUI offers painless setup and management
- LAN/WAN management via WEB-Based management interface
- Supports DHCP client/server function
- Supports N-Way Auto-Negotiation on each LAN and WAN port
- Supports PPPoE protocol
- Supports NAT/NAPT function
- Supports Port, IP and MAC filtering, Port Forwarding and
Virtual DMZ (Firewall);
WEP and WPA (Wireless)
- Supports extensive LED indicators for network diagnostics
- External power adapter
- FCC CLASS B, CE
- Built-in 11Mbps IEEE802.11b wireless LAN Access Point
- An instant LAN with an integrated 4 ports 10/100Mbps switch


Product specificaties

Merk: Intellinet
Categorie: Router
Model: Wireless B Router 523233
Kleur van het product: Zwart
Gewicht: - g
LED-indicatoren: LAN, Link, Power, Y
Stroom: 0.5 A
Wi-Fi-standaarden: 802.11b
Ethernet LAN: Ja
Aantal Ethernet LAN (RJ-45)-poorten: 4
Certificering: FCC, CE
Ingangsspanning: 12 V
Modulatie: DSSS
Wifi-standaard: 802.11b
Interfacetype Ethernet LAN: Fast Ethernet
Ethernet LAN, data-overdrachtsnelheden: 10, 100 Mbit/s
Bekabelingstechnologie: 10/100Base-T(X)
Netwerkstandaard: IEEE 802.11b, IEEE 802.3, IEEE 802.3u
Ondersteunde beveiligingsalgoritmen: 128-bit WEP, 64-bit WEP, 802.1x RADIUS, WEP, WPA
Antennas quantity: 1
Ondersteunde netwerkprotocollen: PPPoE, DHCP, NAT/NAPT
Web-gebaseerd management: Ja
Ondersteunde WLAN data-overdrachtsnelheden: 1, 2,5.5, 11 Mbit/s
Frequentiebereik: 2.1GHz
Netwerkfuncties: Fast Ethernet
xDSL-verbinding: Ja
MAC adres filtering: Ja
Filtratie: Ja
Ethernet WAN: Ja
DHCP server: Ja
Aansluiting antenne: RP-SMA
DHCP client: Ja
Afmetingen (B x D x H): 127 x 96 x 30 mm
Network address translation (NAT): Ja
Bedrijfstemperatuur (T-T): 0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V): 0 - 90 procent

Heb je hulp nodig?

Als je hulp nodig hebt met Intellinet Wireless B Router 523233 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Router Intellinet

Handleiding Router

Nieuwste handleidingen voor Router