Intel NUC10i5FNK Handleiding

Intel Desktop NUC10i5FNK

Lees hieronder de 📖 handleiding in het Nederlandse voor Intel NUC10i5FNK (9 pagina's) in de categorie Desktop. Deze handleiding was nuttig voor 70 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
User Guide for NUC10i7FNK, NUC i5 K, i3 K10 FN NUC10 FN
1
Intel® NUC Kit NUC i7FNK 10
Intel® NUC Kit NUC K 10i5FN
Intel® NUC Kit NUC K 10i3FN
User
Guide
User Guide for NUC10i7FNK, NUC i5 K, i3 K10 FN NUC10 FN
2
Before You Begin
CAUTIONS
The steps in this guide sume familiar with computer terminology with the safety as you’re and
practices a regulatory compliance required for using and modifying computer equipment.nd
Disconnect the computer from its power so ce and from any network before performi any of the steps ur ng
described in this guide.
Failure to disconnect power, telecommunications nks, or orks before you open the computer or li netw
perform procedures can result in personal injury or equipment damage. Some circuitry on the board any
can continue operate even though the front panel power bu on is f.to tt of
Follow these guidelines before you begin:
• Always follow the steps in each procedure in the correct order.
• Create a log to record information about your computer, such as mo l, serial numbersde ,
installe tions, an conf at n informat d op d igur io ion.
• Electrostati ischarge (ESD) can damage components. rform the procedures describe in c d Pe d
thi ch tes ap r onl at an ESD workstat n ing an a tatic wr t strap and a conductive foam y io us ntis is
pad. If such a stat n available, you n provide some ESD protection by wearing an io isn’t ca
antistatic wrist strap and attaching to a metal part of the computer chassis. it
Installation Precautions
When you inst an test the I el NUC, observe l warning an caut ns in the installat n all d nt al s d io io
instruct ns. io
To avoid injury, be careful of:
• Sharp pins on connecto rs
• Sharp pins circuit boards on
• Rough edges and sharp corners on the chassis
• Hot components (such as SSDs, processors, voltage regulators, a heat sinks) nd
• Damage wires that could cause a short circuit to
Observe l rning caut ns that instruct you fe computer serv ng to qualifal wa s and io to re r ici ied
tec perso el. hnical nn
Observe Safety and Regulatory Requirements
If you f w don’t ollo these instruct ns, you increase your safety risk and the possibility of noncom iance io pl
wi regional laws and regul ions. th at
User Guide for NUC10i7FNK, NUC i5 K, i3 K10 FN NUC10 FN
3
Thi guide s you w to: s tell ho
•
Install and remove moryme
•
Install a M.2 SSDn
•
Install a VESA mount bracket
•
Connect power
•
Install an operating system
•
Install the latest drivers
Open the Chassis
Unscrew the four corner screws on the bottom of the chassis and lift the cover.
Installing and Removing Memory
Intel NUC Kits NUC10i7FNK, K and K have two 2 -pin DDR4 -DIMM socketsNUC10i5FN NUC10i3FN 60 SO .
Memory requirements:
• 1.2V low voltage memory
• 2666 MHz -DIMMs SO
• Non-ECC
Find compatible memory modules in the Intel Product Compatibility Tool
• NUC10i7FNK
• NUC10i5FNK
• NUC10i3FNK
NOTE
If you plan to install only one memory module, install it in the lower memory
socket.


Product specificaties

Merk: Intel
Categorie: Desktop
Model: NUC10i5FNK

Heb je hulp nodig?

Als je hulp nodig hebt met Intel NUC10i5FNK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Desktop Intel

Handleiding Desktop

Nieuwste handleidingen voor Desktop