InFocus LightPro IN1140 Handleiding

InFocus Beamer LightPro IN1140

Lees hieronder de 📖 handleiding in het Nederlandse voor InFocus LightPro IN1140 (8 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

1. Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from overheating, it is recommended that you install the

projector in a location that does not block ventilation. For example, do not place the projector on a crowded coffee table, sofa, bed, etc. Do not put the

projector in an enclosure such as a book case or cabinet that restricts air ow.

2. Do not use the projector near water or moisture. To reduce the risk of re and/or electric shock, do not expose the projector to rain or moisture.

3. Do not install near heat sources such as radiators, heaters, stoves or any other apparatus such as ampliers that emit heat.

4. Do not use the projector in direct sunlight.

5. Do not use near any appliance generating a strong magnetic eld.

6. Do not use the projector in areas susceptible to excessive dust and dirt.

7. Turn off the product before cleaning.

8. Disconnect the power cord if the product is not being used for a long period of time.

9. Ensure that the ambient room temperature is within 0- 40°C (32-104°F).

10. Ensure that relative humidity is 5 - 35°C (41- 95°F), 80% (Max.), non-condensing.

11. Do not drop, throw or try to bend your product.

12. Dispose of your projector in an environmentally appropriate manner and according to local disposal laws. Disposing the projector in a re may cause an

explosion.

13. Clean only with dry cloth.

14. Only use attachments/accessories specied by the manufacturer.

15. Do not use the unit if it has been physically damaged or abused. Physical damage/abuse would be (but not limited to):

a Unit has been dropped.

a Charger or plug has been damaged.

a Liquid has been spilled on the projector.

a Projector has been exposed to rain or moisture.

a Something has fallen into the projector or something is loose inside.

Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please contact your

local reseller or service center before you send the unit for repair.

16. Do not let objects or liquids enter the projector. They may touch dangerous voltage points and short out parts that could result in re or electric shock.

17. Follow all warnings and cautions in this manual and on the projector.

18. The unit should only be repaired by appropriate service personnel.

19. The projector surface gets hot when run for long periods of time. Avoid touching the projector until it has been turned off and has cooled down.

Important afety nStructIon S I

e S Wye afety arnIngS

Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible.

A stick or laser pointer is recommended to avoid the need for the user to enter the beam.

When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen.

In order to minimize power, use room blinds to reduce ambient light levels.

The manufacturer reserves the right to make technical changes. The manufacturer assumes no liability for damages incurred directly or indirectly from errors,

omissions, or discrepancies between the device and this documentation.

Other brands or logos are trademarks or registered trademarks of their respective companies.

This device is not intended for use in the direct eld of view at visual display workplaces.

c / topyrIght rademark

cautIon

rISk of eXpLoSIon If Battery IS repLaced

By an Incorrect type.

When dISpoSIng BatterIeS, Be Sure to

do So In an enVIronmentaLLy proper

manner.

decLaratIon of onformIty c

Manufacturer: InFocus Corporation, 13190 SW 68th Parkway, Portland, Oregon 97223-8368 USA

We declare under our sole responsibility that this projector conforms to the following directives and norms:

EMC Directive 2004/108/EC

ErP Directive 2009/125/EC

EMC: EN 55022: 2010

EN 55024: 2010

EN 61000-3-2: 2006+A2:2009

EN 61000-3-3:2008

Low Voltage Directive 2006/95/EC

Safety: IEC 60950-1:2005; EN 60950-1:2006+A12:2011

trademarkS

Apple, Macintosh, iPod, iPod nano, and iPhone are trademarks or registered trademarks of Apple Computer, Inc. IBM is a trademark or registered trademark

of International Business Machines, Inc.

Microsoft, PowerPoint, and Windows are trademarks or registered trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or registered

trademarks of Adobe Systems Incorporated. InFocus, In Focus, INFOCUS (stylized), MondoCenter, Mondopad, BigTouch, JTouch, and LitePro are either

registered trademarks or trademarks of InFocus Corporation in the United States and other countries.

NOTE: This product is covered electrical and electronic equipment under the European Union's Waste from Electrical and Electronic Equipment

("WEEE") Directive (2002/96/EC). The WEEE Directive requires that covered equipment be collected and managed separately from typical

household waste in all EU member states. Please follow the guidance of your local environmental authority or ask the shop where you purchased

the product for collection or recycling options.

fcc WarnIng

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by InFocus Corporation may void authority to operate the equipment.

canada

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

a agency pproVaLS

FCC, CE, and CB

Other specific Country Approvals may apply. Please see product certification label.

This document applies to regulatory model IN1142.