Infiniton AA12HC Handleiding

Infiniton Airco AA12HC

Lees hieronder de 📖 handleiding in het Nederlandse voor Infiniton AA12HC (119 pagina's) in de categorie Airco. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/119

S yplit t p a oune w ll m ted

a o d oneir-c n i it r

OOw

wwn

nne

eer s M

r s M

r s Mr s Ma

aan

nnu

uua

aal

11326001000883

※

Please read this owner s manual carefully and

thoroughly before operating the unit!

Take care of this manual for future reference.

CONTENTS

8. Don't fill the tank to its full capacity (the liquid injection volume does not exceed 80%

of the tank volume).

9. Even the duration is short, it must not exceed the maximum working pressure of

the tank.

10. After the completion of the tank filling and the end of the operation process, you

should make sure that the tanks and equipment should be removed quickly and all

closing valves in the equipment are closed.

11.The recovered refrigerants are not allowed to be injected into another system before

being purified and tested.

Note: The identification should be made after the appliance is scrapped and refrigerants

are evacuated. The identification should contain the date and endorsement. Make sure

the identification on the appliance can reflect the flammable refrigerants contained in this

appliance.

Recovery:

1.The clearance of refrigerants in the system is required when repairing or scrapping the

appliance. It is recommended to completely remove the refrigerant.

2.Only a special refrigerant tank can be used when loading the refrigerant into the

storage tank. Make sure the capacity of the tank is appropriate to the refrigerant

injection quantity in the entire system. All tanks intended to be used for the recovery of

refrigerants should have a refrigerant identification (i.e. refrigerant recovery tank).

Storage tanks should be equipped with pressure relief valves and globe valves and

they should be in a good condition. If possible, empty tanks should be evacuated and

maintained at room temperature before use.

3.The recovery equipment should be kept in a good working condition and equipped with

equipment operating instructions for easy access. The equipment should be suitable

for the recovery of R32 refrigerants. Besides, there should be a qualified weighting

apparatus which can be normally used. The hose should be linked with detachable

connection joint of zero leakage rate and be kept in a good condition.

Before using the recovery equipment, check if it is in a good condition and if it gets

perfect maintenance. Check if ll electrical components are sealed to prevent the

leakage of the refrigerant and the fire caused by it. If you have any question, please

consult the manufacturer.

4.The recovered refrigerant shall be loaded in the appropriate storage tanks, attached

with a transporting instruction, and returned to the refrigerant manufacturer. Don't mix

refrigerant in recovery equipment, especially a storage tank.

5.The space loading R32 refrigeration can't be enclosed in the process of transportation.

Take anti electrostatic measures if necessary in transportation. In the process of

transport, loading and unloading, necessary protective measures must be taken to

protect the air conditioner to ensure that the air conditioner is not damaged.

6.When removing the compressor or clearing the compressor oil, make sure the

compressor is pumped to an appropriate level to ensure that there is no residual R32

refrigerants in the lubricating oil. The vacuum pumping should be carried out before the

compressor is returned to the supplier. Ensure the safety when discharging oil from the

system.

Maintenance Notice

- 29 -

Notices for installation

Installation for indoor unit

Installation for outdoor unit

Check after installation and test operation

Maintenance Notice

Installation service

Operation and maintenance

Warning

Safety Precautions

Notices for usage

Names of each part

Clean and care

Troubleshooting

Note: All the illustrations in this manual are for explanation

purpose only. Your air conditioner may be slightly different.

The actual shape shall prevail.They are subject to change

without notice for future improuement.

Product specificaties

Merk:	Infiniton
Categorie:	Airco
Model:	AA12HC
Inverter technologie:	Ja
Energie-efficiëntieklasse (koeling):	A++
Breedte binnenunit:	200 mm
Diepte binnenunit:	750 mm
Hoogte binnenunit:	285 mm
Bedrijfstemperatuur ( koeling ) ( T - T ):	16 - 32 °C
Indoor eenheid gewicht:	8000 g
Outdoor eenheid gewicht:	25000 g