Indesit HI 20.B (BK) Z Handleiding

Indesit Oven HI 20.B (BK) Z

Lees hieronder de 📖 handleiding in het Nederlandse voor Indesit HI 20.B (BK) Z (36 pagina's) in de categorie Oven. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/36
OVEN
HI 20.B Z
Contents
Installation, 2-4
Positioning
Electrical connections
Data plate
Description of the appliance, 5
Overall view
Control panel
Start-up and use, 6
Starting the oven
Using the cooking timer
Cooking modes, 7-8
Cooking modes
Practical cooking advice
Cooking advice table
Hob, 9
Type of hob
Switching on the glass ceramic hob
Practical advice on using the glass ceramic hob
Precautions and tips, 10
General safety
Disposal
Respecting and conserving the environment
Maintenance and care, 11
Switching the appliance off
Cleaning the appliance
Cleaning the oven door
Replacing the light bulb
Assistance
Operating Instructions
GB
English, 1
GB
Espanol, 12 Portuges, 23
ES PT
2
GB
! Before placing your new appliance into operation
please read these operating instructions carefully.
They contain important information for safe use, for
installation and for care of the appliance.
! Please keep these operating instructions for future
reference. Pass them on to possible new owners of
the appliance.
Positioning
! Keep packaging material out of the reach of
children. It can become a choking or suffocation
hazard (see Precautions and tips).
! The appliance must be installed by a qualified
person in compliance with the instructions provided.
Incorrect installation may cause harm to persons,
animals or may damage property.
Fitting the appliance
Use the appropriate cabinet to ensure that the
appliance functions properly.
î‚• The panels adjacent to the oven must be made of
heat-resistant material.
î‚• Cabinets with a veneer exterior must be assembled
with glues which can withstand temperatures of up
to 100°C.
î‚• To install the oven under the counter (see
diagram) and in a kitchen unit, the cabinet must
have the following dimensions:
! The appliance must not come into contact with
electrical parts once it has been installed.
The consumption indications on the data plate have
been calculated for this type of installation.
Ventilation
To ensure good ventilation, the back panel of the
cabinet must be removed. It is advisable to install the
oven so that it rests on two strips of wood, or on a
completely flat surface with an opening of at least 45 x
560 mm (see diagrams).
Centring and fastening
Position the 4 tabs on the side of the oven according
to the 4 holes of the outer frame. Adjust the tabs
according to the thickness of the cabinet side panel,
as shown below:
thickness of 20 mm: take off
the removable part of the tab
(see diagram)
thickness of 18 mm: use the
first groove, which has already
been set in the factory (see
diagram)
thickness of 16 mm: use the
second groove (see diagram)
Secure the appliance to the cabinet by opening the
oven door and putting 4 screws into the 4 holes of the
outer frame.
! All parts which ensure the safe operation of the
appliance must not be removable without the aid of a
tool.
595
558
min
45
min
575-585
min
560
+4 -0
480
+4 -0
555
580
500
39
15
595
23
572
543
543
543
543
543545
560 mm.
45 mm.
Installation
3
GB
Electrical connections
The cooker must be connected to the mains electricity
supply. It is designed to operate with alternating
current at the voltage and frequency indicated on the
data plate (see the following page).
The hob is connected to the cooker using a special
connector.
BUILT-IN HOB
BUILT-IN OOC KER
WHITE RED
YELLOW
BLU NE REEG
O nly on
certain models
Fitting the power supply cable
1. Open the terminal
board by inserting a
screwdriver into the side
tabs of the cover. Use
the screwdriver as a
lever by pushing it down
to open the cover (see
diagram).
2. Install the power supply cable by loosening the
cable clamp screw and the wire contact screws L-N-
. Connect the wires to the corresponding terminals:
the Blue wire to the terminal marked (N), the Brown
wire to the terminal marked (L) and the Yellow Green
wire to the terminal marked .
The terminal board is designed for a 400 V three-
phase connection (see diagrams below).
400V 3N~H05RR-F
5x2.5 CEI-UNEL 35363
If the electrical system has other characteristics (see
diagrams below), carry out the electrical connection
using the connection supports provided in the box P.
230V 1N~H07RN-F 3x4
CEI-UNEL 35364
400V 2N~H05RR-F
4x2.5 CEI-UNEL 35363
3. Secure the power supply cable by fastening the
clamp screw.
4. Close the cover of the terminal board.
N L3 L1L2
1
3
2
4
5
N
L2
L3
L1
P
N L
1
3
2
4
5
N L2 L1
1
3
2
4
5

Product specificaties

Merk: Indesit
Categorie: Oven
Model: HI 20.B (BK) Z

Heb je hulp nodig?

Als je hulp nodig hebt met Indesit HI 20.B (BK) Z stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Oven Indesit

Indesit

Indesit FIE 76 P K.A (WH) Handleiding

22 Juni 2023
Indesit

Indesit KFW 3543 H IX UK Handleiding

15 Juni 2023
Indesit

Indesit IFG 51 K.A Handleiding

14 Juni 2023
Indesit

Indesit FIE 56 K.B IX GB/1 Handleiding

7 Juni 2023
Indesit

Indesit FIM51 KA BK S Handleiding

5 Juni 2023
Indesit

Indesit IFW 6230 WH.1 Handleiding

3 Juni 2023
Indesit

Indesit FIE 56 K.B (WH) GB Handleiding

29 Mei 2023
Indesit

Indesit IF 51 K.A IX S Handleiding

29 Mei 2023
Indesit

Indesit BSZ 6009/IN Handleiding

28 Mei 2023
Indesit

Indesit FIM 33 K.A (WH) GB Handleiding

19 Mei 2023

Handleiding Oven

Nieuwste handleidingen voor Oven

Candy

Candy FCDIEN688X WF Handleiding

23 November 2024
Candy

Candy FBP645X Handleiding

23 November 2024
Candy

Candy CVM6724PW Handleiding

23 November 2024
Candy

Candy CVM6724PX Handleiding

23 November 2024
Candy

Candy CMFM8N/1 Handleiding

23 November 2024
Candy

Candy CMFM5X Handleiding

23 November 2024
Candy

Candy CELFS602X Handleiding

23 November 2024
Candy

Candy CMFM5X/1 Handleiding

23 November 2024
Candy

Candy FCP605NXL Handleiding

23 November 2024
Candy

Candy FXP694X Handleiding

23 November 2024