Indesit FIMS 51 K.A (WH) AUS Handleiding

Indesit Oven FIMS 51 K.A (WH) AUS

Lees hieronder de 📖 handleiding in het Nederlandse voor Indesit FIMS 51 K.A (WH) AUS (48 pagina's) in de categorie Oven. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/48

FIMS 51 K.A AUS

FIMS 51 K.A IX AG

FIMS 52 K.A AUS

FIMS 52 K.A IX AUS

Contents

Installation, 2-3

Positioning

Electrical connections

Data plate

Description of the appliance, 4

Overall view

Control panel

Start-up and use, 5

Starting the oven

How to use the timer

Using the cooking timer

Assistance

Cooking modes, 6-7

Cooking modes

Practical cooking advice

Cooking advice table

Precautions and tips, 8

General safety

Disposal

Respecting and conserving the environment

Maintenance and care, 9

Switching the appliance off

Cleaning the appliance

Cleaning the oven door

Replacing the light bulb

Operating Instructions

OVEN

Français, 10 Espanol, 19

Portuges, 28

FR ES

PT AR

English,1

! Before placing your new appliance into operation

please read these operating instructions carefully.

They contain important information for safe use, for

installation and for care of the appliance.

! Please keep these operating instructions for future

reference. Pass them on to possible new owners of

the appliance.

Positioning

! Keep packaging material out of the reach of

children. It can become a choking or suffocation

hazard. (see Precautions and tips).

! The appliance must be installed by a qualified

person in compliance with the instructions provided.

Incorrect installation may cause harm to persons,

animals or may damage property.

Fitting the appliance

Use the appropriate cabinet to ensure that the

appliance functions properly.

• The panels adjacent to the oven must be made of

heat-resistant material.

• Cabinets with a veneer exterior must be assembled

with glues which can withstand temperatures of up

to 100°C.

• to install the oven under the counter (see diagram)

and in a kitchen unit, the cabinet must have the

following dimensions:

! The appliance must not come into contact with

electrical parts once it has been installed.

The consumption indications on the data plate have

been calculated for this type of installation.

Ventilation

To ensure good ventilation, the back panel of the

cabinet must be removed. It is advisable to install the

oven so that it rests on two strips of wood, or on a

completely flat surface with an opening of at least 45 x

560 mm (see diagrams).

Centring and fastening

Secure the appliance to the cabinet by opening the

oven door and putting 4 screws into the 4 holes of the

outer frame.

! All parts which ensure the safe operation of the

appliance must not be removable without the aid of a

tool.

Installation

595 mm.

24 mm.

545 mm.

5 mm.

567 mm.

23 mm.

575-585 mm.

45 mm.

560 mm.

547 mm. min.

560 mm.

45 mm.

DATA PLATE

Dimensions

width cm 43.5

height cm 32

depth cm 40

Volume

lt. 56

Electrical

connections

voltage: 220-240V ~ 50/60 Hz

(see data plate)

maximum power absorbed 2250W

ENERGY LABEL

Directive 2002/40/EC on the label

of electric ovens.

Standard EN 50304

Models with cooling ventilation:

Energy consumption for Natural

convection heating mode:

Convection

Declared energy consumption for

Forced convection Class heating

mode: Multi-cooking

Models without cooling

ventilation:

Energy consumption for Forced

convection heating mode:

Multi-cooking

Declared energy consumption for

Natural convection Class heating

mode: Convection

This appliance conforms to the

following European Economic

Community directives:

2006/95/EEC of 12/12/06 (Low

Voltage) and subsequent

amendments;

-2004/108/EEC of 15/12/04

(Electromagnetic Compatibility) and

subsequent amendments;

93/68/EEC of 22/07/93 and

subsequent amendments.

2002/96/EC and subsequent

amendments.

Electrical connections

! Ovens equipped with a three-pole power supply

cable are designed to operate with alternating current

at the voltage and frequency indicated on the data

plate located on the appliance (see below).

Fitting the power supply cable

1. Open the terminal

board by inserting a

screwdriver into the

side tabs of the cover.

Use the screwdriver as

a lever by pushing it

down to open the cover

(see diagram).

2. Loosen the cable

clamp screw and

remove it, using a

screwdriver as a lever

(see figure).

3. Remove the wire

contact screws L-N-

, then fasten the wires

under the screw heads,

respecting the colour

code: Blue (N), Brown

(L) and Yellow-Green

Verde ( ).

Connecting the supply cable to the mains

Install a standardised plug corresponding to the load

indicated on the data plate (see side).

The appliance must be directly connected to the

mains using an omnipolar circuit-breaker with a

minimum contact opening of 3 mm installed between

the appliance and the mains, suitable for the load

indicated and complying with current electrical

regulations (the earthing wire must not be interrupted

by the circuit-breaker). The supply cable must not

come into contact with surfaces with temperatures

higher than 50°C.

! The installer must ensure that the correct electrical

connection has been made and that it is compliant

with safety regulations.

Before connecting to the power supply, make sure

that:

• The appliance is earthed and the plug is

compliant with the law.

• The socket can withstand the maximum power of

the appliance, which is indicated on the data

plate (see below).

• The voltage must be in the range between the

values indicated on the data plate (see below).

• The socket is compatible with the plug of the

appliance. If the socket is incompatible with the

plug, ask an authorised technician to replace it. Do

not use extension cords or multiple sockets.

! Once the appliance has been installed, the power

supply cable and the electrical socket must be easily

accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced

by authorised technicians only (see Assistance).

! The manufacturer declines any liability should

these safety measures not be observed.

Product specificaties

Merk:	Indesit
Categorie:	Oven
Model:	FIMS 51 K.A (WH) AUS

Heb je hulp nodig?

Als je hulp nodig hebt met Indesit FIMS 51 K.A (WH) AUS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Oven Indesit

Indesit FIE 76 P K.A (WH) Handleiding

22 Juni 2023

Indesit KFW 3543 H IX UK Handleiding

15 Juni 2023

Indesit IFG 51 K.A Handleiding

14 Juni 2023

Indesit FIE 56 K.B IX GB/1 Handleiding

7 Juni 2023

Indesit FIM51 KA BK S Handleiding

5 Juni 2023

Indesit IFW 6230 WH.1 Handleiding

3 Juni 2023

Indesit FIE 56 K.B (WH) GB Handleiding

29 Mei 2023

Indesit IF 51 K.A IX S Handleiding

29 Mei 2023

Indesit BSZ 6009/IN Handleiding

28 Mei 2023

Indesit FIM 33 K.A (WH) GB Handleiding

19 Mei 2023

Handleiding Oven

Nieuwste handleidingen voor Oven

Whirlpool AKZM 8481 P NB Handleiding

3 December 2024

Whirlpool AKZM 8421 H NB Handleiding

3 December 2024

Whirlpool OMK58CU1SX Handleiding

3 December 2024

Whirlpool OMSR58RU1SX Handleiding

3 December 2024

Whirlpool MBNA900X Handleiding

3 December 2024

Whirlpool MBNA920B Handleiding

3 December 2024

Whirlpool OMR35HR0B Handleiding

3 December 2024

Whirlpool OMR58HR0X Handleiding

3 December 2024

Whirlpool AKZM 8610 IX Handleiding

3 December 2024

Whirlpool W7 OM5 4S P Handleiding

3 December 2024