IDIS DC-D2233 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor IDIS DC-D2233 (50 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/50
Powered by
Network
Camera
Operation Manual
DC-D2233WHR
DC-D2233WR
DC-D2233W
DC-D2233R
DC-D2233
2
This is a basic operation manual for use of an IDIS network camera. Users who are using this product for the rst time,
as well as users with experience using comparable products, must read this operation manual carefully before use and
heed to the warnings and precautions contained herein while using the product. Safety warnings and precautions
contained in this operation manual are intended to promote proper use of the product and thereby prevent accidents
and property damage and must be followed at all times. Once you have read this operation manual, keep it at an easily
accessible location for future reference.
•The manufacturer will not be held responsible for any product damage resulting from the use of unauthorized parts and
accessories or from the user's failure to comply with the instructions contained in this operation manual.
•The information in this document is believed to be accurate as of the date of publication. The manufacturer is not
responsible for any problems resulting from the use thereof. The information contained herein is subject to change
without notice. Revisions or new editions to this publication may be issued to incorporate such changes.
•It is recommended that rst-time users of this network camera and individuals who are not familiar with its use seek
technical assistance from their retailer regarding product installation and use.
•If you need to disassemble the product for functionality expansion or repair purposes, you must contact your retailer and
seek professional assistance.
•Both retailers and users should be aware that this product has been certied as being electromagnetically compatible for
commercial use. If you have sold or purchased this product unintentionally, please replace with a consumer version.
Safety Symbols
Symbol DescriptionType
Warning An important instruction or set of important instructions that can lead to severe injury or even death
if not followed.
Caution An instruction or set of instruction that can lead to personal injury and/or property damage if not
followed.
In-Text
Symbol DescriptionType
Caution Important information concerning a specic function.
Note Useful information concerning a specic function.
Before reading this manual
Before reading this manual
3
Safety Precautions
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Safeguards
1. Read Instructions
All the safety and operating instructions should be read before the
appliance is operated.
2. Retain Instructions
The safety and operating instructions should be retained for future
reference.
3. Cleaning
Unplug this equipment from the wall outlet before cleaning it. Do not
use liquid aerosol cleaners. Use a damp soft cloth for cleaning.
4. Attachments
Never add any attachments and/or equipment without the approval
of the manufacturer as such additions may result in the risk of re,
electric shock or other personal injury.
5. Water and/or Moisture
Do not use this equipment near water or in contact with water.
6. Placing and Accessories
Do not place this equipment on an wall or ceiling that is not strong
enough to sustain the camera. The equipment may fall, causing
serious injury to a child or adult, and serious damage to the
equipment. Wall or shelf mounting should follow the manufacturer's
instructions, and should use a mounting kit approved by the
manufacturer.
This equipment and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the
equipment and cart combination to overturn.
Do not place this equipment in an enclosed space. Sucient
ventilation is required to prevent an increase in ambient temperature
which can cause malfunction or the risk of re.
7. Power Sources
This equipment should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power, please consult your equipment dealer or local power
company.
You may want to install a UPS (Uninterruptible Power Supply)
system for safe operation in order to prevent damage caused by an
unexpected power stoppage. Any questions concerning UPS, consult
your UPS retailer.
8. Power Cord
Operator or installer must remove power and TNT connections before
handling the equipment.
9. Lightning
For added protection for this equipment during a lightning storm,
or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the equipment due to lightning
and power-line surges. If thunder or lightning is common where the
equipment is installed, use a surge protection device.
10. Overloading
Do not overload wall outlets and extension cords as this can result in
the risk of re or electric shock.
11. Objects and Liquids
Never push objects of any kind through openings of this equipment
as they may touch dangerous voltage points or short out parts that
could result in a re or electric shock. Never spill liquid of any kind on
the equipment.
12. Servicing
Do not attempt to service this equipment yourself. Refer all servicing
to qualied service personnel.
13. Damage requiring Service
Unplug this equipment from the wall outlet and refer servicing to
qualied service personnel under the following conditions:
A. When the power-supply cord or the plug has been damaged.
B. If liquid is spilled, or objects have hit the equipment.
C. If the equipment has been exposed to rain or water.
D. If the equipment does not operate normally by following the
operating instructions, adjust only those controls that are covered
by the operating instructions as an improper adjustment of other
controls may result in damage and will often require extensive work
by a qualied technician to restore the equipment to its normal
operation.
E. If the equipment has been dropped, or the cabinet damaged.
F. When the equipment exhibits a distinct change in performance —
this indicates a need for service.
14. Replacement Parts
When replacement parts are required, be sure the service technician
has used replacement parts specied by the manufacturer or that
have the same characteristics as the original part. Unauthorized
substitutions may result in re, electric shock or other hazards.
15. Safety Check
Upon completion of any service or repairs to this equipment, ask the
service technician to perform safety checks to determine that the
equipment is in proper operating condition.
16. Field Installation
This installation should be made by a qualied service person and
should conform to all local codes.
17. Correct Batteries
Warning: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
18. Tmra
A manufacturer’s maximum recommended ambient temperature
(Tmra) for the equipment must be specied so that the customer and
installer may determine a suitable maximum operating environment
for the equipment.


Product specificaties

Merk: IDIS
Categorie: Bewakingscamera
Model: DC-D2233
Kleur van het product: Black, White
Gewicht: 430 g
Hoogte: 101.8 mm
Soort: IP-beveiligingscamera
Bluetooth: Nee
Maximale capaciteit van de geheugenkaart: 32 GB
Ondersteund audioformaat: ADPCM, G.711, G.726
Ondersteunde videoformaten: H.264, M-JPEG
Vormfactor: Dome
Connectiviteitstechnologie: Bedraad
Ethernet LAN: Ja
Maximum resolutie: 1920 x 1080 Pixels
Diameter: 130 mm
Type stroombron: Power over Ethernet (PoE)
Minimale belichting: 0.002 Lux
Aantal cameras: 1
Geïntegreerde geheugenkaartlezer: Ja
Compatibele geheugenkaarten: MicroSD (TransFlash), MicroSDHC
Ingebouwde HDD: Nee
Nachtvisie: Nee
Video bewegings-detectie: Ja
HTTPS-encryptie: Ja
Audiosysteem: 2-weg
Aantal Ethernet LAN (RJ-45)-poorten: 1
Brandpuntbereik: 3.3 - 10 mm
Certificering: FCC, CE, KC
Volledige HD: Ja
Omvang optische sensor: 1/2.8 "
Type beeldsensor: CMOS
Camera sluitertijd: 1 - 1/8000 s
Type camerasluiter: Elektronisch
Ondersteunde grafische resoluties: 352 x 240,640 x 360,704 x 480,1280 x 720 (HD 720),1920 x 1080 (HD 1080)
Ruisonderdrukking: Ja
Bekabelingstechnologie: 10/100Base-T(X)
Netwerkstandaard: IEEE 802.1x, IEEE 802.3af
Maximaal 30 frames per seconde: 30 fps
Geluidsdetectie: Ja
Ondersteunde netwerkprotocollen: RTP/RTSP/TCP, RTP/RTSP/HTTP/TCP, RTP/UDP RTSP/TCP, HTTP, HTTPS, FTP, SNTP, SMTP, FEN, mDNS, uPNP
IP-adresfilter: Ja
Progressive scan: Ja
Ethernet interface type: Fast Ethernet
Signaal/ruis-verhouding: 31.2 dB
Power over Ethernet (PoE): Ja
Draaihoek: 356 °
Pan bereik: -165 - 165 °
Dag/nacht modus: Ja
Maximum aperture number: 2.5
Minimum aperture number: 1.3
Methode voor streaming: Multicast
BNC output ports: 1
Videostreaming: Ja
Infrarood (IR)-afsluitingsfilter: Ja
Achtergrondverlichting compensatie: Ja
Alarm ingang/uitgang: Ja
Lens type: Varifocaal
Bitratecontrole: Constant Bit Rate (CBR), Variable Bit Rate (VBR)
Stroomverbruik (voeding via Ethernet (PoE)): 3.5 W
Wifi: Nee
Bedrijfstemperatuur (T-T): -10 - 50 °C
Relatieve vochtigheid in bedrijf (V-V): 0 - 90 procent
Bereik kantelhoek: 7 - 90 °
Aanpassing sluitertijd: Automatisch/handmatig
Privézone maskeren: Ja
Kijkhoek lens, horizontaal: 99.8 °
Draaien & spiegelen: Ja
Type waarschuwingsnotificatie: E-mail, Snapshot alert message
Kijkhoek lens, diagonaal: 118.2 °
Kijkhoek lens, verticaal: 52.2 °
Actieve ombevoegde demontage alarm: Ja
Iris: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met IDIS DC-D2233 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera IDIS

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera