Husqvarna Huskystar 219 Handleiding

Husqvarna Naaimachine Huskystar 219

Lees hieronder de 📖 handleiding in het Nederlandse voor Husqvarna Huskystar 219 (56 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 95 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/56
219/224
User’s Guide
Type A
This houshold sewing machine is designed to comply with
IEC/EN 60335-2-28 and UL1594
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always be followed,
including the following:
Read all instructions before using this household sewing machine.
DANGER - To reduce the risk of electric shock:
A sewing machine should never be left unattended when plugged in. Always
unplug this sewing machine from the electric outlet immediately after using and
before cleaning.
Always unplug before relamping. Replace bulb with same type rated 15 Watt.
WARNING - To reduce the risk of burns, re, electric
shock, or injury to persons:
This sewing machine is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use
of the sewing machine by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the sewing
machine.
Use this sewing machine only for its intended use as described in this manual. Use
only attachments recommended by the manufacturer as contained in this manual.
Never operate this sewing machine if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged, or dropped into water.
Return the sewing machine to the nearest authorized dealer or service center for
examination, repair, electrical or mechanical adjustment.
Never operate the sewing machine with any air openings blocked. Keep ventilation
openings of the sewing machine and foot controller free from the accumulation of
lint, dust, and loose cloth.
Keep fi ngers away from all moving parts. Special care is required around the sewing
machine needle.
Always use the proper needle plate. The wrong plate can cause the needle to break.
Do not use bent needles.
Do not pull or push fabric while stitching. It may defl ect the needle causing it to
break.
Switch the sewing machine off (“0”) when making any adjustment in the needle
area, such as threading needle, changing needle, threading bobbin, or changing
presser foot, etc.
Always unplug sewing machine from the electrical outlet when removing covers,
lubricating, or when making any other user servicing adjustments mentioned in the
instruction manual.
Never drop or insert any object into any opening.
Do not use outdoors.
Do not operate where aerosol (spray) products are being used or where oxygen is
being administrated.
To disconnect, turn all controls to the off (“0”) position, then remove plug from
outlet.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
SAVE THESE INSTRUCTIONS
For the USA and Canada
This sewing machine has a polarized plug (one blade wider than the other). To reduce
the risk of electric shock, this plug is intended to fi t in a polarized outlet only one way.
If the plug does not fi t fully in the outlet, reverse the plug. If it still does not fi t, contact
a qualifi ed electrician to install the proper outlet. Do not modify the plug in any way.
1
Name of Parts 2-3
Extension Table 4
To Store Foot Control 4
Standard Accessories 5
GETTING READY TO SEW
Connecting the Machine to the
Power Supply 6
Controlling Sewing Speed 7
Up/Down Needle Position Button 8
Reverse Stitch Button 8
Pressure Adjusting Dial 8
Dropping the Feed Teeth 9
Sewing Light 9
Presser Foot Lifter 10
To Remove and Attach
the Presser Foot 10
To Remove and Attach
Presser Foot Ankle 10
Changing the Needle 11
Needle and Thread chart 11
Winding the Bobbin
Setting the Spool 12
Removing the Bobbin 12
Winding the Bobbin 13
Inserting the Bobbin 14
Threading the Machine 15
To Use Needle Threader 16
Drawing Up Bobbin Thread 17
Pattern Selector Dial 18
Stitch Length Dial 18
Zigzag Width Control 19
Infi nite Needle Position 19
Balancing Needle Thread Tension 20
Straight Stitching 21
Starting to Sew 21
Changing Sewing Direction 21
Finishing Sewing 22
Straight Stitching on Heavy Fabrics 23
Seam Allowance Lines 23
UTILITY STITCHING
Zigzag Stitching 24
Overcasting 24
Seam/Overcast stitch 25
Multiple ZigZag 25
Reinforced Straight Stitch 26
Lightening Stitch 26
Sewing Buttons 27
Automatic Buttonhole 28-31
Corded Buttonhole 32
Manual Buttonhole 33-34
Zipper Sewing 35-38
Blind Stitch Hemming 39
Decorative Satin Stitch Patterns 40
Stretch Stitch Patterns 40
Adjusting Stretch Stitch Balance 41
Smocking 42
Quilting 43
Pin Tucking 44
Shell Tuck 44
Fagoting 45
Patch Work 45
Applique 46
CARE OF YOUR MACHINE
Cleaning the Hook Assembly Area
and Feed Teeth 47
Replacing the Bobbin Holder 48
Troubleshooting 49-50
TABLE OF CONTENTS


Product specificaties

Merk: Husqvarna
Categorie: Naaimachine
Model: Huskystar 219

Heb je hulp nodig?

Als je hulp nodig hebt met Husqvarna Huskystar 219 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Naaimachine Husqvarna

Handleiding Naaimachine

Nieuwste handleidingen voor Naaimachine