Husqvarna 580BTS Mark II Handleiding

Husqvarna Bladblazer 580BTS Mark II

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Husqvarna 580BTS Mark II (84 pagina's) in de categorie Bladblazer. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/84
28
29 55
5 82
KEY
T
O SYMBOLS
2
ā€“
English
Symbols
W
ARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operatorā€™s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
ā€¢ Hearing protection
ā€¢ Approved eye protection
ā€¢ A breathing mask should be used
when there is a risk of dust.
Gloves should be worn when
necessary.
The blower can forcibly throw
objects that can bounce back.
This can result in serious eye
injuries if the recommended
safety equipment is not used.
The blower operator must
make sure that no
bystanders or animals
come nearer than 15
metres. Whenever several
operators are working in
the same work area, they
should maintain a safe
distance of at least 15
metres from one another.
Keep all parts of your body away from
hot surfaces.
Air purge
The rating plate showing
serial number.
yyyy
is the
production year,
ww
is the
productionweek.
Other symbols/decals on the mac
hine refer to special
certiļ¬cation requirements for certain markets.
Switch off the engine b
y moving the stop
switch to the STOP position before
carrying out any checks or
maintenance.
Always wear protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
Refuelling.
Choke lever in ā€open positionā€.
Choke lever in ā€closed positionā€.
yyyywwxxxxx
The engine exhaust from this product
contains chemicals known to the State
of California to cause cancer, birth
defects or other reproductive harm.
CONTENTS
English
ā€“
3
Contents
Note the f
ollowing before starting:
Please read the oper
atorā€™s manual carefully.
This decal certiļ¬es that the product has been approved in
accordance with Amer ican exhaust emissions
requirements EPA Ph III and CARB Tier III. The
Emissions Compliance Period referred to on the
Emissions Compliance label indicates the numbers of
operating hours for which the engine has been shown to
meet Federal and California emission requirements.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify
the design and appearance of products without prior
notice.
The machine is only designed for blowing lawns,
pathways, asphalt roads and the like.
For customer assistance, contact us at our website:
www.husqvarna.com
KEY
TO SYMBOLS
Symbols
................................................................ 2
CONTENTS
Contents
............................................................... 3
Note the following before starting: ........................ 3
INTR
ODUCTION
Dear customer!
..................................................... 4
WHA
T IS WHAT?
What is what on the b
lower? ................................ 5
What is what on the blower? ................................ 6
What is what on the blower? ................................ 7
GENERAL SAFETY PRECA
UTIONS
Gener
al ................................................................. 8
SAFETY INSTR
UCTIONS
P
ersonal protective equipment ............................. 9
Machine
ā€²
s safety equipment ................................. 10
Checking, maintaining and servicing the
machine
ā€²
s safety equipment ................................. 11
General working instructions ................................ 12
ASSEMBL
Y
Assemb
ling the blow pipe and control handle ...... 15
Assembling the blow pipe and control handle ...... 16
FUEL HANDLING
Fuel
...................................................................... 17
Fueling .................................................................. 18
ST
ARTING AND STOPPING
Star
ting and stopping ........................................... 19
MAINTENANCE
Gener
al ................................................................. 21
Carburetor ............................................................ 21
Mufļ¬‚er .................................................................. 21
Cooling system ..................................................... 21
Air intake screen ................................................... 22
Spark plug ............................................................ 22
Air ļ¬lter ................................................................. 22
Shoulder strap ...................................................... 23
Maintenance schedule ......................................... 24
TECHNICAL D
ATA
T
echnical data ...................................................... 25
FEDERAL AND CALIFORNIA EMISSIONS
CONTROL WARRANTY STATEMENT
Y
OUR WARRANTY RIGHTS AND OBLIGATIONS 27
!
W
ARNING! Long-term exposure to noise
can result in permanent hearing
impairment. So always use approved
hearing protection.
!
W
ARNING! Under no circumstances may
the design of the machine be modiļ¬ed
without the permission of the
manufacturer. Always use genuine
accessories. Non-authorized
modiļ¬cations and/or accessories can
result in serious personal injury or the
death of the operator or others.
Your warranty may not cover damage or
liability caused by the use of non-
authorized accessories or replacement
parts.
!
W
ARNING! A blower is a dangerous tool
if used carelessly or incorrectly and can
cause serious, even fatal injuries. It is
extremely important that you read and
understand the contents of this
Operatorā€™s manual.


Product specificaties

Merk: Husqvarna
Categorie: Bladblazer
Model: 580BTS Mark II

Heb je hulp nodig?

Als je hulp nodig hebt met Husqvarna 580BTS Mark II stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bladblazer Husqvarna

Handleiding Bladblazer

Nieuwste handleidingen voor Bladblazer