Husqvarna-Viking H-Class 100Q Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Husqvarna-Viking H-Class 100Q (44 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/44
USERS GUIDE
When using an electrical appliance, basic safety precautions should always be followed, including
the following:
Read all instructions before using this household sewing machine.
A sewing machine should never be left unattended when plugged in. Always unplug this
sewing machine from the electric outlet immediately after using and before cleaning.
Always unplug before relamping. Replace bulb with same type rated 5 Watt.
This sewing machine is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the sewing machine by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the sewing machine.
Use this sewing machine only for its intended use as described in this manual. Use only
attachments recommended by the manufacturer as contained in this manual.
Never operate this sewing machine if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped into water. Return the sewing
machine to the nearest authorized dealer or service center for examination, repair, electrical
or mechanical adjustment.
Never operate the sewing machine with any air openings blocked. Keep ventilation
openings of the sewing machine and foot controller free from the accumulation of lint,
dust, and loose cloth.
Keep À ngers away from all moving parts. Special care is required around the sewing
machine needle.
Always use the proper needle plate. The wrong plate can cause the needle to break.
Do not use bent needles.
Do not pull or push fabric while stitching. It may deÁ ect the needle causing it to break.
Wear safety glasses.
Switch the sewing machine off (“0”) when making any adjustment in the needle area,
such as threading needle, changing needle, threading bobbin, or changing presser foot, etc.
Always unplug sewing machine from the electrical outlet when removing covers, lubricating,
or when making any other user servicing adjustments mentioned in the instruction manual.
Never drop or insert any object into any opening.
Do not use outdoors.
Do not operate where aerosol (spray) products are being used or where oxygen is being
administrated.
To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
The sound pressure level under normal operating conditions is 75dB(A).
Machine overview ............................................ 3
Accessories ........................................................... 4
Presser feet ..........................................................4
Stitches ....................................................................5
Unpacking..............................................................7
Connect to the power supply ................... 7
Pack away after sewing.................................. 8
Polarized plug information ................. 8
Changing the presser foot ........................... 8
Changing the needle ....................................... 9
Presser foot lifter .............................................. 9
Presser Foot Up Saftey ................................. 9
Needles ............................................................... 10
Universal needle ...............................10
Stretch needle ....................................10
Embroidery needle ...........................10
Denim needle ....................................10
Wing needle .......................................10
Spool pins........................................................... 11
Horizontal Position ..........................11
Vertical Position ...............................11
Threading the upper thread .................... 12
Needle Threader ...............................14
Threading for Twin Needle ..................... 15
Cutting the Thread ....................................... 15
Wind the bobbin ........................................... 16
Place the Bobbin in the Machine ...18
Lower the feed teeth .................................. 19
Needle thread tension ...............................19
Raise the Bobbin thread ............................ 20
Adjust the presser foot pressure .......... 20
Speed Control Slide ................................... 21
Foot Control .................................................... 21
Machine Sound ............................................... 21
Function buttons ............................................ 22
START/STOP button ....................22
Reverse button ..................................22
FIX button ........................................22
Needle Stop Up/Down...................23
Stitch Length .....................................23
Stitch Width ......................................23
Pattern Selection buttons ................23
Warning Messages/Sound ........................ 24
Main Motor Overloaded .................24
Bobbin Winding Position ...............24


Product specificaties

Merk: Husqvarna-Viking
Categorie: Naaimachine
Model: H-Class 100Q

Heb je hulp nodig?

Als je hulp nodig hebt met Husqvarna-Viking H-Class 100Q stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Naaimachine Husqvarna-Viking

Handleiding Naaimachine

Nieuwste handleidingen voor Naaimachine

Brother

Brother BM-2800 Handleiding

16 November 2024
Brother

Brother LS-2125i Handleiding

16 November 2024
Juki

Juki MH-382 Handleiding

16 November 2024
Juki

Juki MH-380 Handleiding

16 November 2024
Juki

Juki LK-1903BN Handleiding

16 November 2024
Alfa

Alfa World Handleiding

14 November 2024
Singer

Singer M1005 Handleiding

14 November 2024
Singer

Singer HD6330M Handleiding

14 November 2024