Huawei B593s-22 Handleiding

Huawei Dongle B593s-22

Lees hieronder de 📖 handleiding in het Nederlandse voor Huawei B593s-22 (2 pagina's) in de categorie Dongle. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Thank you for purchasing the CPE. This CPE brings you a

high speed wireless network connection.

This document will help you understand your CPE so you can start using it right away.

Please read this document carefully before using your CPE.

For detailed information about the functions and configurations of the CPE, refer to the

online help on the web management page that comes with the CPE.

Note:

You must install Adobe Reader version 6.0 or higher to read the online help.

Getting to Know Your CPE

Note:

The CPE function descriptions and illustrations in this document are for your reference

only. The product you have purchased may vary.

Application Scenario

The CPE can:

 Provide Internet access for Wi-Fi devices and computers.

 Connect to telephones for voice services.

 Connect to fax machines for fax services (optional).

 Be used to save and share files in USB storage devices.

 Expand LAN coverage together with hubs and switches.

Note:

 During thunderstorms and rainy weather, turn off and disconnect the CPE.

 When the CPE is in use, you can alter its position or orientation to improve signal

reception.

 Use a standard or authorized external antenna to avoid CPE malfunctions.

Selecting the Installation Environment

Obstacles such as concrete and wooden walls will affect the transmission of the network

signal. It is recommended that when you install CPE you choose an open space.

Keep the CPE away from equipment that generates strong magnetic and electric fields, for

instance microwaves, refrigerators, and satellite receivers.

Appearance

123

13 15

456

○

○○

1 Power indicator

 On: CPE turned on

 Off: CPE turned off

○

○○

2 WLAN indicator

 On: WLAN function enabled

 Blinking: Transmitting data through WLAN

 Off: WLAN function disabled

○

○○

3 WPS indicator

 On: WPS function enabled

 Blinking: WPS interconnection verification is in progress. This process should not take

longer than 2 minutes.

 Off: WPS function disabled

○

○○

4 TEL indicator

 Off: On-hook condition

 Blinking: Incoming call

 On: Off-hook condition

○

○○

5 Mode indicator

 Steady blue: The CPE is connected to an LTE network, but no data is being

transmitted.

 Blinking blue: The CPE is connected to an LTE network and is transmitting data.

 Steady green: The CPE is connected to a UMTS network, but no data is being

transmitted.

 Blinking green: The CPE is connected to a UMTS network and is transmitting data.

 Steady yellow: The CPE is connected to a GSM network, but no data is being

transmitted.

 Blinking yellow: The CPE is connected to a GSM network and is transmitting data.

 Steady red: The CPE failed to connect to a wireless network.

 Steady purple: The SIM card is not recognized, the PIN has not been entered, or the

PIN verification failed.

○

○○

6 Signal indicator

 On: Indicates network signal strength. Full light indicates strong signal.

 Off: No network signal.

○

○○

12 LAN port

Connect to computers, switches, or other network devices.

○

○○

13 LAN indicator

 On: The port is connected to a device.

 Blinking: Data is being transmitted through the port.

 Off: No device is connected to the port.

○

○○

14 WPS button

After the WPS function is enabled, press and hold this button for more than 0.5 seconds to

initiate WPS interconnection.

○

○○

15 Reset button

Press and hold for more than 2 seconds to restore the CPE to its factory settings.

Note:

Restoring the default settings of the CPE will override all the previous settings.

○

○○

16 WLAN button

Press and hold for more than 2 seconds to enable or disable the WLAN function.

○

○○

17 External antenna port

Connect to an external antenna.

Note:

Do not power off the CPE during the upgrade. Otherwise, the CPE may be damaged.

Getting Started

Installing the USIM Card

Install the USIM card according to the illustration.

Note:

 When removing the USIM card, gently press the USIM card in, then release. The

card will automatically pop out.

 Do not remove the USIM card when it is in use. Doing so will affect the

performance of your CPE, and data stored on the USIM card may be lost.

Connecting to a Power Adapter

Install the power adapter according to the illustration.

Note:

 Only use power adapters compatible with the CPE and provided by a designated

manufacturer. Use of an incompatible power adapter or one from an unknown

manufacturer may cause the CPE to malfunction, fail, or could even cause a fire.

Such use voids all warranties, whether expressed or implied, on the product.

 The CPE's power adapter model is HW-120100XYW, HW-120200XYW,

HKA01212010-XY or HKA02412020-XY. X and Y represent letters or numbers that

vary by region. For details about the specific adapter model, contact an authorized

dealer.

Logging In to the Web Management Page

The web-based configuration utility can be used for initial CPE installation, parameter

configuration, and function management through the browser.

The Windows XP operating system and Internet Explorer 7.0 are used as an example.

Ensure that the CPE is connected to the computer. Follow these steps to log in to the web

management page:

1. 1. Connect CPE cables.

2. 2. Configure the computer's IP address so that the IP addresses of the computer and the

CPE are in the same network segment.

Note:

 The CPE's default IP address is 192.168.1.1, the subnet mask is 255.255.255.0.

 It is recommended that you use the automatically obtained IP addresses for the

computer and domain name system (DNS) server. If you manually configure the

computer IP address, you must set the DNS server IP address to the CPE's IP

address. Otherwise, you will fail to log in to the web management page.

3. 3. Open the browser, and enter http://192.168.1.1

http://192.168.1.1

http://192.168.1.1http://192.168.1.1 in the address box.

4. 4. Enter the user name and password to log in to the web management page.

Note:

 The default user name is admin

admin

adminadmin.

 The default password is admin

admin

adminadmin.

LTE is a trademark of ETSI.

Version: V100R001_05 Part Number: 31010MGP

Product specificaties

Merk:	Huawei
Categorie:	Dongle
Model:	B593s-22
Gewicht:	390 g
Breedte:	190 mm
Diepte:	176 mm
Hoogte:	35 mm
AC invoer voltage:	100 - 240 V
Typisch stroomverbruik:	12 W
Temperatuur, in bedrijf:	0 - 40 °C
2G standaarden:	EDGE,GPRS,GSM
3G standaarden:	HSDPA,HSPA+,HSUPA
4G standaard:	LTE
Wi-Fi-standaarden:	802.11b,802.11g,Wi-Fi 4 (802.11n)
Generatie mobiel internet:	4G
Ethernet LAN:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	4
Aantal USB-aansluitingen:	1
USB-versie:	2.0
Aansluiting voor netstroomadapter:	Ja
SIM-kaartsleuf:	Ja
RJ-11 ports kwantiteit:	2
Wifi-band:	Nee
Wifi-standaard:	Wi-Fi 4 (802.11n)
Interfacetype Ethernet LAN:	Fast Ethernet
Ethernet LAN, data-overdrachtsnelheden:	10,100 Mbit/s
Bekabelingstechnologie:	10/100Base-T(X)
Netwerkstandaard:	IEEE 802.11b,IEEE 802.11g,IEEE 802.11n,IEEE 802.3,IEEE 802.3u
Ondersteunde beveiligingsalgoritmen:	WEP,WPA-PSK,WPA2-PSK
Soort antenne:	Intern & extern
3G:	Ja
4G:	Ja
Temperatuur bij opslag:	-20 - 70 °C
Mobiele netwerkverbinding:	Ja
Luchtvochtigheid bij opslag:	5 - 95 procent
UMTS bands ondersteund:	800,900,2100,2600 MHz
Frequentiebereik:	2.4 - 2.4835 GHz
MAC adres filtering:	Ja
Filtratie:	Ja
Firewall:	Ja
Flash memory:	512 MB
DHCP server:	Ja
AC-ingangsspanning:	100 - 240 V
Stroomverbruik (typisch):	12 W
Bedrijfstemperatuur (T-T):	0 - 40 °C
Antenne-ontwerp:	Intern & extern