Hotpoint TCD970G Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Hotpoint TCD970G (20 pagina's) in de categorie Wasdroger. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
Instruction booklet
TUMBLE DRYER
GB
English
!Keep this instruction booklet on hand in order to refer to it when necessary. Take it with you when you move, and
should you sell this appliance or pass it on to another party, make sure that this booklet is supplied along with the
dryer so that the new owner may be appliance works.informed about warnings and suggestions on how the
!Read these instructions carefully; the following pages contain important information on installation and suggestions
on how the appliance works.
This symbol reminds you to read this booklet.
1
Contents
TCD970
First time you turn on your dryer
you must select your preferred
language see page 6
Important information, 2-3
Installation, 4
Where to put your dryer
Ventilation
Electrical connection
Before you start using your dryer
Dryer description, 5
To open the door
The features
Control panel
The Display, 6-8
Start and programmes, 8-11
Choosing a programme
Special programmes
Programme option modifiers
Table of programmes
The controls
Laundry, 12-13
Sorting your laundry
Wash care labels
Special clothing items
Drying times
Warnings and Suggestions, 14
General safety
Disposal
Saving energy and respecting the environment
Maintenance and Care, 15
Switching off the electricity
Cleaning the filter after each cycle
Empty the water container after each cycle
Check the drum after each cycle
Cleaning the condenser unit
Cleaning the dryer
Troubleshooting, 16
Service, 17
Hotpoint Guarantee, 19
Hotpoint After Sales Service, 20
GB
Important
Information Installation Description The Display Start and
Programmes Laundry Warnings and
Suggestions Troubleshooting Service
Maintenance
and Care
2
GB
Important Information
!You MUST clean the fluff filter after EVERY drying
cycle.
Fluff Filter...
!Failure to clean the filter after EVERY drying cycle will affect the drying performance of your machine.
- It will take longer to dry and as a result will use more electricity during drying.
!You MUST empty the water container after EVERY
drying cycle.
Water Container...
Priming the Water Collection System
When your dryer is new, the water container will not collect water until the system is primed... this will take 1 or 2 drying
cycles. Once primed it will collect water during every drying cycle.
STEP 1.
Open the door of your
dryer.
STEP 2.
Pull out the filter (using
the two finger grips).
STEP 3.
Clean any fluff deposits
from the filter mesh.
STEP 4.
Refit the filter - NEVER
run the dryer without the
filter in position.
For your Condenser dryer to operate efficiently, you must follow the regular maintenance schedule shown below:
STEP 1.
Pull the water container
towards you and remove
it fully from the dryer.
STEP 2.
Empty all the water
collected in the water
container.
!Failure to empty the water container will result in:
- The machine will stop heating (so the load may still be wet at the end of the drying cycle).
- The ‘Empty Water’ message will tell you that the water container is full.
STEP 3.
Refit the water container,
ensuring that it is pushed
fully back into position.
!The ‘Empty Water’
message reminds you to
empty the water container
at the start and at the
end of each programme.
3
Important Information
Condenser Unit...
!You MUST clean the fluff from the condenser EVERY
month.
!Failure to clean the condenser could cause premature
failure of your dryer.
Check that:
- The positioning arrows are pointing upwards.
- The 3 clips are re-secured back into their ‘lock’ position.
STEP 3.
Flush the condenser, from
the rear with water, to
remove any fluff deposits.
STEP 4.
Refit the condenser unit
- ensure that the unit is
pushed in fully, all 3 clips
are re-secured and the
positiong arrows on the
front of the condenser are
pointing upwards.
Rotate 3 clips
STEP 1.
Open the condenser cover
- hold the handle and
pull towards you.
STEP 2.
Remove the condenser by
rotating the 3 clips then
pulling the condenser
towards you.
(There may be some water
in the tubes, this is normal).
GB
Important
Information Installation Description The Display Start and
Programmes Laundry Warnings and
Suggestions Troubleshooting Service
Maintenance
and Care


Product specificaties

Merk: Hotpoint
Categorie: Wasdroger
Model: TCD970G
Apparaatplaatsing: Vrijstaand
Kleur van het product: Zwart, zilver
Deurscharnieren: Links
Breedte: 595 mm
Diepte: 584 mm
Hoogte: 850 mm
Type lader: Voorbelading
Uitgestelde start timer: Ja
Aantal droogprogramma's: 31
Energie-efficiëntieklasse: C
Deur openingshoek: 180 °
Nominale capaciteit: 7 kg
AC-ingangsspanning: 220 - 240 V
AC-ingangsfrequentie: 50 - 60 Hz
Type beeldscherm: LCD
Droogprogramma's: Snel

Heb je hulp nodig?

Als je hulp nodig hebt met Hotpoint TCD970G stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wasdroger Hotpoint

Handleiding Wasdroger

Nieuwste handleidingen voor Wasdroger