Hotpoint NT M11 9X3E UK Handleiding

Hotpoint Wasdroger NT M11 9X3E UK

Lees hieronder de 📖 handleiding in het Nederlandse voor Hotpoint NT M11 9X3E UK (4 pagina's) in de categorie Wasdroger. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

THANK YOU FOR BUYING A HOTPOINT PRODUCT.

In order to receive a more complete assistance, please

Quick guide

Before using the appliance carefully read the Safety

Instructions.

OPENING THE DOOR DURING THE CYCLE

Laundry can be checked while the drying cycle runs and any

garments already dry can be removed, while drying continues for

the remaining items. After closing the door, press the "Start/Pause"

button to resume machine operation.

Keep the door closed until the cycle end to save time and energy.

DAILY USE

Doing this will keep your machine working at its BEST:

- remember to empty your water tank after each drying cycle.

- remember to clean your lters after each drying cycle.

Refer to the Care & Maintenance section.

1. Plug the dryer into the power supply socket.

2. Open the door and load garments; always refer to instructions on

clothing labels and the max loads indicated in the programme

section. Empty pockets. Make sure garments do not get caught

between the door and/or the door filter. Do not load items that

are dripping wet. Do not tumble dry large, very bulky items.

3. Close the door.

4. Press the "On/Off" button.

5. Select the most suitable programme

for the type of fabric in that

load.

6. Select the options, if necessary.

7. Press the "

Start/Pause"

button to begin drying.

8. At the end of the drying cycle, a buzzer will beep. An indicator on

the control panel signals the end of the cycle. Pull the load out

immediately to prevent the formation of creases on laundry.

9. Turn the machine off by pressing the "On/Off" button, open the

door and pull the clothing out. If the machine is not switched off

manually, after about a quarter of an hour from the end of the

cycle , the appliance turns off automatically to save energy.

Note that some programme/option accords with "Crease Care"

system. This means that for some hours, after the end of the

drying cycle, the drum rotates at regular intervals to prevent the

formation of creases.

In case of power failure, it is necessary to press the "Start/Pause"

button to restart the cycle.

CARE LABEL

Always check the care labels, especially when placing garments in

the tumble dryer for the ﬁ rst time. Below are the most commonly

used symbols:

May be tumble dried.

Do not tumble dry.

Tumble dry – high heat.

Tumble dry – low heat.

FIRST TIME USE

Make sure that the water tank is correctly inserted. Make sure

that the drain hose on the back of the dryer is ﬁxed correctly,

either to the dryer’s water tank, or to your domestic drainage

system.

The dryer must be installed in a room with a temperature

ranging between 5°C and 35°C to ensure proper operation.

Before using the dryer make sure it has been in an upright

position for at least 6 hours.

Should you wish to change the opening side of the door, please

contact our After-sales Service. (See phone number in the

warranty booklet).

CONTROL PANEL

1 ON/OFF Button (hold for Reset)

2 Programme Selection Knob

3 Start/Pause Button

Options Buttons*

4 Active Care

5 Dryness Level

6 Start Delay

7 Timed Drying

8 Cycle End

9 Gentle (hold for Key lock)

10 Crease Care (hold for Mute)

*Note: some models may have the wording in full instead of the icons.

INDICATORS

Dryness Level: Iron Dry - Hanger Dry - Cupboard Dry - Extra Dry

Cycle Phase: Drying - Cool Down - END End of Cycle

Empty water tank - Clean door lter - Clean bottom lter

Refer to troubleshooting section: Failure: Call after sales service -

DEMO

Demo Mode

3 “

“

3 “

“

END

5 6 7

*MAX LOAD 9 Kg (Dry load)

OPTIONS

These buttons allow you to personalise the selected programme

according to personal requirements.

Not all options are available for all programmes. Some options

may be incompatible with ones you have previously set; if so,

you will be alerted by the buzzer and/or blinking indicators.

If the option is available, the option indicator will stay on. The

programme may retain some options selected in previous drying

cycles.

Active Care

This function allows to preserve the original appearance

and brilliance of your garments at best, by controlling the motor

speed, the rotation of the drum, and the temperature.

Dryness Level

Press the relevant button several times to obtain a diﬀerent

level of residual moisture on your laundry. An indicator signals the

level being selected.

Iron Dry: very delicate drying. Items will be more easily

ironed immediately after the cycle.

Hanger Dry: a level intended for delicate garments ready

to be hanged.

Cupboard Dry: the laundry is ready to be folded and put

away.

Extra Dry: for laundry intended to be worn at the end of the

cycle.

Start Delay

This option is for delaying the start of the cycle. Press the

corresponding button several times to ﬁnd the required delay.

Once the max time is reached, the option is reset by pressing

the button again. An indicator on the control panel signals the

time being selected. After pressing the "Start/Pause" button, the

machine signals the time remaining to the start of the cycle. If the

door is opened, press the "Start/Pause" button once the door has

been closed.

Timed Drying

This option is to manually set the drying time. Press the

corresponding button to set the required time for drying. An

indicator on the control panel signals the time being selected.

Cycle End

This option activates a prolonged buzzer at the end of the

cycle. Enable it if you do not think you will hear the normal sound

at the end of the cycle. This option remains in memory, if selected

in previous drying.

Gentle

Enables a more gentle treatment of the laundry by reducing

the drying temperature.

Key Lock

This option makes all machine controls inaccesible, except

the "On/Oﬀ" button. When the machine is on:

• to activate the option, keep the button pressed until the

machines signals that the option has been enabled.

• to disable the option, keep the button pressed until the machine

signals that the option has been disabled.

This option remains in memory if selected in previous drying.

Crease Care

This option add a crease treatment at the end of the cycle by

means of a periodic rotation of the drum (duration up to 10

hours). It is particularly suitable when it is not possible to remove

the laundry as soon as the drying ends. If this option is used

together with the Start Delay, the crease treatment is added also

in the Start Delay phase. This option remains in memory if

selected in the previous drying.

Mute

This option turns oﬀ all sounds of control panel. Only

warnings remain active. When the machine is on:

• to activate the option, keep the button pressed until the

machines signals that the option has been enabled.

• to disable the option, keep the button pressed until the machine

signals that the option has been disabled.

PROGRAMS

The duration of these programs will depend on the size of the

load, types of textiles, the spin speed used in your washer and

any extra options selected. In machines equipped with display,

the duration of the cycles is shown on the control panel. The

remaining time is constantly checked and adjusted during the

drying cycle to show the best possible estimate.

Option to use - If all your loads on Automatic Cycles are

consistently less dry or more dry than you would like, you may

increase or decrease the dryness level using the speciﬁc option.

Mixed kg 4

This programme is ideal for drying cotton and synthetic

fabrics together.

Eco kg Max*

This is the most eﬃcient programme in terms of energy

consumption and is suitable for drying normal wet cotton

laundry. The values on the Energy Label are based on this

programme.

NOTE: For optimal energy eﬃciency this cycle by default is set up to

"Cupboard Dry" level. For a higher dryness level we suggest using

the Cotton cycle.

Cotton kg Max*

Cycle suitable for drying all types of cotton, ready to be

placed in the cupboard.

Synthetics kg 4

For drying synthetic fabrics.

Wool kg 1

Programme for drying wool clothes. It is advisable to turn the

items inside out before drying. If heavy edges remain damp, leave

them to dry naturally.

Silk kg 0.5

Gentle drying of silk garments.

Anti Allergy kg Max*

This cycle has the “Allergy UK” approval of “The British Allergy

Foundation” attesting the eﬀective reduction and elimination of

allergens. It can be used both with damp load (drying and

treatment) and dry load (half load only).

Cuddly Toys kg 2.5

This cycle preserves the appearance of cuddly toys, keeping

them at their best. Remove all accessories before proceeding

with drying. Each single piece must not exceed 600 gr.

Pre-Iron

This cycle relaxes ﬁbres, thus making ironing and folding

easier. Suitable for small load of damp or dry cotton and cotton

blend fabrics. Not for wet items.

Refresh

A short programme suitable for refreshing ﬁbres and

garments through the emission of fresh air. Do not use on wet

items. It can be used on with any load size but is more eﬀective

with small loads. It lasts about 20 minutes.

Duvet

Programme intended to dry bulky items, such as a single duve.

Bed & Bath kg Max*

This programme is intended for drying cotton towels and

sheets.

Baby kg 2

A programme intended to dry garments and linen of

new-born babies (cotton and chenille), as well as delicate

garments.

Do not dry garments having plastic covering.

Jeans kg 3

For drying sturdy cotton including denim trousers and jackets.

Shirts kg 3

This is a programme for cotton or cotton blend/synthetics

shirts.

Quick guide

Power consumption

oﬀ-mode (Po) - Watts 0.42

left-on mode (Pl) - Watts 2.00

Programs Minuteskg kWh

Eco* 9 1.69 215

Eco 4.5 0.81 110

Synthetics 4 0.94 113

*This is the reference programme for the energy label and suitable to

dry normal wet cotton laundry. This is the most eﬃcient programme

in terms of energy consumption for drying wet cotton laundry.

(Standard/Default starting conﬁguration)

Cleaning the tumble dryer

• The external metal, plastic and rubber parts can be cleaned

with a damp cloth.

• Clean the front air intake grille regularly (every 6 months)

with a vacuum cleaner to remove any lint, ﬂuﬀ or dust

deposits. Furthermore, remove any lint deposits from the

ﬁlters area, using a vacuum cleaner every so often.

• Do not use solvents or abrasives.

A B

CARE AND MAINTENANCE

WARNING: unplug the dryer during the cleaning and

maintenance procedures.

Emptying the water tank after each cycle (see Fig. A).

Pull the container out of the dryer and empty it into a sink or

other suitable drain, then place it back properly. Do not use the

dryer without having inserted the container back in place.

Cleaning the door lter after each cycle (see Fig. B).

Pull the ﬁlter out and clean it by removing the lint from the ﬁlter

surface under running water or using a vacuum cleaner. For optimal

performance, dry up the ﬁlter before inserting it back in place.

Do not use the dryer without having reinserted the lter in place.

Remove the door ﬁlter as described below:

1. Open the door and pull the ﬁlter upwards.

2. Open the ﬁlter and remove the lint from all its parts. Replace the

ﬁlter correctly making sure it is fully seated.

Cleaning the bottom lter when the relevant indicator

turns on (see Fig. C).

Pull the ﬁlter out and remove the lint from its surface by washing

it under runing water or by using a vacuum cleaner.

However, it is advisable to clean this ﬁlter after each cycle to

optimise drying performance.

Do not use the dryer without having reinserted the lter in place.

Remove the bottom ﬁlter as described below:

1. Open the bottom cover;

2. Take the handle and pull the ﬁlter out.

3. Open the rear side of the ﬁlter and remove the lint from the

inner surface of the mesh.

4. Clean the ﬁlter chamber avoiding the direct contact with the ﬁns.

5. Close the rear side of the ﬁlter and place it back by checking it

is perfectly integrated into its seat.

6. Lower the ﬁlter handle and close the bottom cover.

7. Make sure the air intake is free.

The lters are essential parts for drying. They are intended

to collect the lint formed during the drying process. In case

of clogged lters, the air ow inside the dryer would be

seriously aected: the drying times would be longer, the

energy consumption would increase and the dryer could be

damaged. If these procedures are not carried out properly,

the dryer may not start.

TRANSPORT AND HANDLING

Never lift the dryer by holding it at the worktop.

1. Unplug the dryer.

2. Remove the water from the water tank completely.

3. Make sure that door and water tank are properly closed.

4. If the drain hose is connected to your drainage system,

re-connect it to the back of the dryer (see "Installation" section

in the Safety Instruction guide).

Heat Pump System

The heat pump contains ﬂuorinated greenhouse gases,

contained in a hermetically sealed unit. This sealed unit contains

0.43 kg of the R134a gas. GWP = 1430 (1 t CO).

PRODUCT DESCRIPTION

1. Water Tank

2. Air Intake

3. Bottom ﬁlter

4. Door ﬁlter

Product specificaties

Merk:	Hotpoint
Categorie:	Wasdroger
Model:	NT M11 9X3E UK
Apparaatplaatsing:	Vrijstaand
Soort bediening:	Draaiknop
Kleur van het product:	Wit
Deurscharnieren:	Rechts
Ingebouwd display:	Ja
Warmtebron:	Electrisch
Gewicht:	44000 g
Breedte:	595 mm
Diepte:	655 mm
Hoogte:	849 mm
Netbelasting:	700 W
Type lader:	Voorbelading
Droogsysteem:	Warmtepomp
Materiaal trommel:	Roestvrijstaal
Snoerlengte:	1.5 m
Trommelinhoud:	120 l
Uitgestelde start timer:	Ja
Startvertraging:	24 uur
Kinderslot:	Nee
Wi-Fi-besturing:	Nee
Waterniveau-indicator:	Ja
Droogklasse:	A
Duur cyclus:	215 min
Geluidsniveau:	64 dB
Anti-kreuk functie:	Ja
Vochtsensor:	Ja
Energie-efficiëntieklasse:	A+++
Energie consumptie:	1.69 kWu
Jaarlijks energieverbruik:	194 kWu
Gewicht verpakking:	46500 g
Breedte verpakking:	655 mm
Diepte verpakking:	693 mm
Hoogte verpakking:	872 mm
Draairichting deur verwisselbaar:	Ja
Geschikt voor paneelaanpassing:	Nee
Aanpasbare centrifugesnelheid:	Nee
Zelfreinigend:	Nee
Inverter technologie:	Nee
Tijdsduur tot uitschakelen:	15 min
Land van herkomst:	Polen
Stroomverbruik (indien uit):	0.5 W
Verlichting in trommel:	Nee
Anti-allergiefunctie:	Ja
Huidige waardering:	10 A
Nominale capaciteit:	9 kg
Type beeldscherm:	LED
Energie-efficiëntieschaal:	A+++ tot G
Indicator filterreiniging:	Nee
Droogprogramma's:	Wool, Freshen-up, Delicate/silk, Eco, Jeans/denim, Cotton, Synthetics