Hotpoint NT M10 81WK UK Handleiding

Hotpoint Wasdroger NT M10 81WK UK

Lees hieronder de 📖 handleiding in het Nederlandse voor Hotpoint NT M10 81WK UK (4 pagina's) in de categorie Wasdroger. Deze handleiding was nuttig voor 87 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

THANK YOU FOR BUYING A HOTPOINT PRODUCT.

In order to receive a more complete assistance,

please register your product on

www.hotpoint.eu/register

Quick guide

Before using the appliance carefully read the Safety Instructions.

PROGRAMMES

1.Mixed kg 4 Time 106'

This programme is ideal for drying cotton and synthetic fabrics

together.

2.Eco cotton kg Max* Time 215'

Standard cotton programme, suitable to dry normally wet

cotton laundry. Most ecient programme in terms of energy

consumption for drying cotton laundry. The values on the Energy

Label are based on this programme.

3.Synthetics kg 4 Time 96'

This programme is suitable for synthetic garments or cotton

blends/synthetic.

4.Wool kg 1 Time 62'

Programme for drying wool clothing. It is advisable to turn the

garments inside out before drying. Leave to dry naturally the heaviest

edges that are still damp.

5.Silk kg 0,5 T 66'ime

Gentle drying of silk garments.

6.Anti Allergy kg Max* Time 252'

This cycle has the “Allergy UK” approval of “The British Allergy

Foundation” attesting the eective reduction and elimination of

allergens. It can be used both with damp load (drying and treatment)

and dry load (half load only).

7.Daily kg 2 Time 140'

Ideal for drying garments of cotton blends or synthetics spun at

high speed in the washing machine.

8.Cuddly toys Kg 2.5 Time 220'

The cycle preserves the original appearance and brilliance of the

cuddly toys at best. Remove all accessories before proceeding

with drying. Every single piece must not exceed 600 gr.

FIRST TIME USE

Make sure that the water tank is correctly inserted. Make sure

that the drain hose on the back of the dyrer is properly xed,

either to the dryers's water tank or to the domestic sewage

system.

The dryer should be installed in environment in a room

temperature range of 20°to 23°C for optimum performance. But

will function if the room is between 14 and 30°C. Before you use

your dryer ensure that it has been in a upright position for at

least 6 hours.

Should you wish to change the opening side of the door, please

contact our After-sales Service. (See phone number in the

warranty booklet).

DAILY USE

Doing this will keep your machine working at its BEST!

Remember to empty your water tank after each drying cycle.

Remember to clean your lters after each drying cycle. (Refer to

section Care & Maintanence).

1. Open the door and load garments. Always refer to instructions

on clothing labels and the max loads indicated in the programme

section. Empty pockets. Make sure garments do not get caught

between the door and/or the door lter.

2. Close the door.

3. Press the button On/O.

4. Select the programme according to the laundry type.

5. Select the options, if necessary.

6. To start the cycle, press the Start/Pause button.

7. At the end of the drying cycle, a buzzer will beep. An indicator on

the control panel signals the end of the cycle. Pull the load out

immediately to prevent the formation of creases on laundry.

8. Turn the machine o by pressing the button On/O, open the

door and pull clothing out. If the machine is not switched o

manually, after about a quarter of an hour from the cycle end, the

appliance turns o automatically to save energy.

If this last stage is not carried out immediately, some machines

and/or some programmes/options are equipped with Crease Care

system. For some hours, after the end of drying, the drum rotates

at regular intervals to prevent the formation of creases.

In case of power failure, it is necessary to press the button Start/

Pause to restart the cycle.

OPENING OF THE DOOR DURING THE CYCLE

During operation, it is possible to open the door. After having

closed it, press the button Start/Pause again to restart the dryer.

*MAX LOAD 8 Kg

CARE LABEL

Always check the care labels, especially when placing garments in

the tumble dryer for the  rst time. Below are the most commonly

used symbols:

May be tumble dried.

Do not tumble dry.

Tumble dry – high heat.

Tumble dry – low heat.

4 5 6

3“

60’

30’ 1h

90’

120’

180’

END

DEMO

CONTROL PANEL

1 On/O button (Reset if long pressed)

2 Programme selection Knob

3 Start/Pausa

Options Buttons*

4 Dryness Level

5 Timed Drying

6 Start Delay

7 Gentle

8 Crease Care (Key Lock if long pressed)

9 Cycle End

*Note: some models may have the wording in full instead of the icons

INDICATORS

Dryness Level: . Iron Dry - Hanger Dry - Cupboard Dry - Extra Dry

Cycle Phase: ENDDrying - Cool Down - End of Cycle

Empty Water tank - Clean Door lter - Clean Bottom lter -

Refer to Troubleshooting Section: Failure: Call after Sales Service.

DEMO

Demo Mode

OPTIONS BUTTONS

These buttons serves to personalise the selected programme

according to personal requirements. Not all options are available

for all programmes. Some options are incompatible with the

ones previously set. The buzzer and/or blinking indicators will

signal the incompatibility. If the option is available, the option

indicator will stay on. Some options may be kept in the memory

of the programme if selected in the previous drying.

9.Refresh

A short programme suitable for refreshing bres and

garments by means of fresh air. Do not use with garments that are

still wet. It can be used on with any load size but is more eective

with small loads. The cycle duration is about 20 minutes.

10.Duvet Time 179'

Programme intended to dry bulky garments, as single duvet.

11.Bed & Bath Kg Max* Time 240'

This programme is intended for drying cotton towels and

sheets.

12.Fitness Kg 4 Time 96''

For drying sports garments made of synthetics or cotton.

13.Baby kg 2 Time 107'

A programme intended to dry garments and linen of new-

born babies (cotton and chenille), as well as delicate garments.

Do not dry garments having plastic covering.

14.Jeans kg 3 Time 127'

For drying cotton jeans-wear and garments made of robust

cotton, like denim, such as trousers and jackets.

15.Shirts kg 3 Time 137'

This is a programme for Shirts made from cotton or cotton

blend/synthetics.

OPTIONS

After selecting the programme, the various options can be

set, if necessary

Dryness Level

Press the related button several times to obtain a dierent

level of residual moisture on garments. An indicator signals the

level being selected.

Iron Dry: a very delicate ironing. Suitable for making ironing

of garments easier immediately after the end of the cycle.

Hanger Dry: a level intended for delicate garments ready to

be hanged.

Cupboard Dry: the garments are ready to be folded and put

away.

Extra Dry: used for garments to be worn at the end of the

cycle.

Start Delay

This option allows you to set the delay of the cycle start. Press

the corresponding button several times to obtain the required

delay. After having reached the max. settable time, the option is

reset by pressing the button again. An indicator on the control

panel signals the time being selected. After having pressed the

button Start/Pause, the machine signals the remaining time

for the cycle start. In case of door opening, after closing, it is

necessary to press the button Start/Pause.

Timed drying

This option allows to set the drying time. Press the

corresponding button to set the required time for drying. After

having reached the max. settable time, a further pressure of the

button resets the option. An indicator on the control panel signals

the time being selected.

Cycle End

This option activates a prolonged buzzer at the end of the

cycle. Enable it if you are not sure to hear the normal sound at the

end of the cycle. This option remains in memory if selected in the

previous drying.

Gentle

Enables a more gentle treatment of the laundry by reducing the

drying temperature.

Key Lock

This option makes all machine controls inaccesible, except the

button On/O. When the machine is on: to activate the option,

keep the button pressed until the indicator goes on.

To disable the option, keep the button pressed until the indicator

goes o. This option remains in memory if selected in the previous

drying.

Crease Care

This option add a crease treatment at the end of the cycle

by means of a periodic rotation of the drum (duration up to 10

hours). It is particularly suitable when it is not possible to remove

the laundry as soon as the drying ends. If this option is used

together with the Start Delay, the crease treatment is added

also in the Start Delay phase. This option remains in memory if

selected in the previous drying.

The duration of these programs will depend on the size of the

load, types of textiles, the spin speed used in your washer and

any extra options selected. In machines equipped with display,

the duration of the cycles is shown on the control panel. The

remaining time is constantly checked and adjusted during the

drying cycle to show the best possible estimate.

Quick guide

CARE AND MANTENANCE

Unplug the dryer during the cleaning and maintenance

procedures.

Emptying the water tank after each cycle (see Fig. A)

Pull the container out of the dryer and and empty it into a sink

or other suitable drain, then place it back. Do not use the dryer

without having inserted the container back in place.

Cleaning the door lter after each cycle (see Fig. B)

Pull the lter out and clean it by removing the lint from the lter

surface under running water or using a vacuum cleaner. Do not

use the dryer without having reinserted the lter in place.

Remove the door lter as described below:

1. Open the door and pull upwards.

2. Open the lter and

remove lint from all its parts. Replace it correctly.

Ensure it is completely inserted ush with the dryer seal.

Cleaning the bottom lter when the relevant indicator

turns on (see Fig. C)

Pull the lter out and remove the lint from its surface by

washing it under runing water or by using a vacuum cleaner.

However, it is advisable to clean this lter after each cycle to

optimise drying performance. Do not use the dryer without

having inserted the lter in place rst.

Remove the bottom lter as described below:

1. Open the lower door.

2. Take the handle and pull the lower lter out.

3. Open the rear side of the lter and remove the lint from the

inner surface of the mesh.

4. Clean the bottom lter chamber avoiding the direct contact

with the leaves.

5. Close the rear side of the lower lter and place it back by

checking it is perfectly integrated in place.

6. Lower the lter handle and close the bottom door.

7. Make sure the air intake is free.

The lters are essential parts for drying. They are intended

to collect the lint formed during drying process. In case

of clogged lters, the air ow inside the dryer would be

seriously aected: the drying times would be longer, the

energy consumption would increase and the dryer could be

damaged. If these procedures are not carried out properly,

the dryer may not start.

PRODUCT DESCRIPTION

1. Water bottle

2. Air Intake

3. Bottom lter

4. Door lter

TRANSPORT AND HANDLING

Never lift the dryer by holding it at the worktop.

1. Unplug the dryer.

2. Make sure that door and water tank are properly closed.

3. If the drain hose is connected to your sewage system, x the

drain hose on the rear of the dryer again (see Installation Guide).

Power consumption

o-mode (Po) - Watts 0.50

left-on mode (Pl) - Watts 1.00

Programs MinutesKg kWh

Eco Cotton * 8 2.53 215

Eco Cotton 4 1.39 127

Synthetics 4 1.18 116

*This is the reference programme for the energy label and suitable to

dry normal wet cotton laundry. This is the most ecient programme

in terms of energy consumption for drying wet cotton laundry.

(Standard/Default starting conguration)

Heat Pump System

The heat pump contains uorinated greenhouse gases,

contained in a hermetically sealed unit. This sealed unit contains

0.15 kg of the F gas R134a. GWP = 1430 (1 t CO2).

A B

Product specificaties

Merk:	Hotpoint
Categorie:	Wasdroger
Model:	NT M10 81WK UK
Apparaatplaatsing:	Vrijstaand
Soort bediening:	Buttons,Rotary
Kleur van het product:	Wit
Deurscharnieren:	Rechts
Ingebouwd display:	Ja
Warmtebron:	Electrisch
Gewicht:	44000 g
Breedte:	595 mm
Diepte:	655 mm
Hoogte:	849 mm
Netbelasting:	850 W
Type lader:	Voorbelading
Droogsysteem:	Warmtepomp
Deurstijl:	Glazen deur
Deurkleur:	Black,White
Snoerlengte:	1.5 m
Trommelinhoud:	120 l
Uitgestelde start timer:	Ja
Startvertraging:	24 uur
Resterende tijd indicatie:	Ja
Wi-Fi-besturing:	Nee
Aantal droogprogramma's:	22
Droogklasse:	B
Duur cyclus:	215 min
Geluidsniveau:	67 dB
Anti-kreuk functie:	Nee
Energie-efficiëntieklasse:	A++
Energie consumptie:	2.58 kWu
Jaarlijks energieverbruik:	308 kWu
Geschikt voor paneelaanpassing:	Nee
Aanpasbare centrifugesnelheid:	Ja
Zelfreinigend:	Ja
Inverter technologie:	Nee
Near Field Communication (NFC):	Nee
Verstelbare voeten:	Ja
Diepte wanneer de deur open is:	1060 mm
Stroomverbruik (ingeschakeld houden):	1 W
Stroomverbruik (indien uit):	0.5 W
Anti-allergiefunctie:	Ja
LED programmavoortgangsindicator:	Ja
Huidige waardering:	10 A
Anti-kreuk cyclus:	215 min
Aanpasbaar droogniveau:	Ja
Aantal droogniveaus:	4
Nominale capaciteit:	8 kg
AC-ingangsspanning:	220 - 240 V
AC-ingangsfrequentie:	50 Hz
Type beeldscherm:	LED
Energie-efficiëntieschaal:	A+++ tot D
Droogprogramma's:	Wool,Sport,Timed,Freshen-up,Eco,Jeans/denim,Blanket,Blouse/shirt,Cotton,Synthetics