Hotpoint NLLCD 1064 DGD AW UK N Handleiding

Hotpoint Wasmachines NLLCD 1064 DGD AW UK N

Lees hieronder de 📖 handleiding in het Nederlandse voor Hotpoint NLLCD 1064 DGD AW UK N (8 pagina's) in de categorie Wasmachines. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

Quick Guide

THANK YOU FOR PURCHASING A HOTPOINT PRODUCT.

To receive more comprehensive assistance, register the

appliance on

www.hotpoint.eu/register

Before using the appliance carefully read the Health and Safety guide.

Before using the machine, it is imperative that the transport bolts are removed. For more

detailed instructions on how to remove them, see the Installation Guide.

CONTROL PANEL

WASH CYCLE TABLE

For all testing institutes:

2) Long cotton cycle: set wash cycle “Cotton ” with a temperature of 40°C.

3) Long synthetics cycle: set wash cycle with a temperature of 40°C.“Synthetics ”

* By selecting the cycle and excluding the spin cycle, the washing machine will Spin & Drain

drain only.

** The duration of the wash cycles can be checked on the display.

***

After programme end and spinning with maximum selectable spin speed, in default

programme setting.

The cycle duration indicated on the display or instruction manual is an estimate based on

standard conditions. The actual duration may vary in relation to several factors, such as the

temperature and pressure of the incoming water, ambient temperature, amount of detergent,

load quantity and type, load balancing and any additional options selected.The values given

for programmes other than the Eco 40-60 programme are indicative only.

1) Eco 40-60 - Test wash cycle in compliance with EU Ecodesign regulation 2019/2014. The most efficient

programme in terms of energy and water consumption for washing normally soiled cotton laundry.

Note: spin speed values shown on the display can slightly differs from the values stated in the table.

1. REMOTE CONTROL button

2. UP / DOWN buttons

3. ON/OFF button

4. ACTIVE CARE button and indicator light

5. START/PAUSE button

6. CONFIRM / KEY LOCK button

7. START DELAY button

8. SPIN button

9. TEMPERATURE button

10. OPTIONS / SETTINGS button

11. STEAM HYGIENE/FAVOURITES button

12. WASH CYCLE SELECTOR KNOB

Maximum load 10 kg

Power input in o mode 0.5 W / in left-on mode 8 W Add

Gar-

ments

( )

Detergents and

Additives Recommended

detergent

Residual damp-

ness % (***)

Energy consump-

tion kWh

Total water l

Laundry

temperature °C

Wash cycle Temperature Max.

spin speed

(rpm)

Max.

load

(kg)

Duration

(h : m)

Pre-

wash Wash Fabric

softener Powder Liquid

Setting Range 1 2 3

Eco 40-60 (1) 40 °C 40°C

1551 10,0 3:59 – –    44 0,95 60 30

1551 5,0 3:00 – –    44 0,70 60 32

1551 2,5 2:35 – –    44 0,45 43 31

Cotton (2) 40°C - 60°C 1600 10,0 3:55 – –    49 1,14 107 45

Synthetics (3) 40°C - 60°C 1200 5,5 2:55 –       35 0,83 80 43

Mixed 40°C - 40°C 1600 10,0 **      –– – – 

Delicates 40°C - 40°C 1000 5,5 **   –  –– – – –

Anti Stain 40° 40°C - 40°C 1000 5,5 **   –   – – – – –

Rapid 30 min 30°C - 30°C 800 5,5 0:30   –  –71 0,21 50 27

Specials

• White 40°C - 90°C 1600 10,0 2:05        54 0,90 100 42

• Bed & Bath 60°C - 60°C 1600 10,0 **   –    – – – –

• Shirts 40°C - 40°C 600 3,5 ** – –  –– – – –

• Business 30°C - 30°C 400 2,0 ** – –  –– – – –

• Baby 40°C - 40°C 800 4,0 ** – –  –– – – –

• Duvet 30°C - 30°C 1000 3,5 ** – –  –– – – –

• Silk & Curtains 30°C - 30°C – 1,0 ** – –  –– – – –

• Jeans 40°C - 40°C 800 4,0 ** – –  –– – – –

• Rapid 15 min 30°C - 30°C 800 4,5 ** – –  –– – – –

• Cuddly toys 30°C - 30°C – 1,0 ** – –– – – – – –

Spin & Drain * – – 1600 10,0 ** – – – – – – – – – – –

Rinse & Spin – – 1600 10,0 ** – – – – – – – – – –

Steam Refresh – – – 2,0 ** – – – – – – – – – – –

20°C 20 °C - 20 °C 1600 10,0 1:50 – –  –55 0,20 95 22

Wool 40°C - 40°C 800 2,5 ** – –  –– – – –

Anti Allergy 60°C 40°C - 60°C 1600 5,5 ** – –    – – – –

Favourites: allows for any wash cycle to be stored.

  Required dosage Optional dosage

! Turning the knob to position allows for accessing the menu from which to set “Specials”

additional washing programmes.

1 2 3

5678911 10

DISPLAY

WASH CYCLES

Follow the instructions on the symbols of the garment’s wash care label. The

value indicated in the symbol is the maximum recommended temperature for

washing the garment.

Eco 40-60

For washing normally soiled cotton garments declared to be

washable at 40 °C or 60 °C, together in the same cycle. This

is the standard cotton programme and the most ecient in

terms of water and energy consumption.

Cotton

Normally to heavily soiled and robust cottons .

Synthetics

Suitable for washing moderately soiled garments made of synthetic bres

(e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton bres.

Mixed

For washing lightly to normally soiled resilient garments in cotton, linen,

synthetic bres and mixed bres.

Delicates

For washing very delicate garments. It is advisable to turn the garments

inside out before washing them. For best results, use liquid detergent on

delicate garments.

Anti Stain 40°

The programme is suitable to heavily-soiled garments with resistant

colours. It ensures a washing class that is higher than the standard class (A

class). When running the programme, do not mix garments of dierent

colours. We recommend the use of powder detergent. Pre-treatment with

special additives is recommended if there are obstinate stains.

Rapid 30 min

For washing lightly soiled garments quickly. This cycle lasts only 30

minutes, saving time and energy.

Specials

• White

For washing home linen in a single cycle. It optimises the use of fabric

softener and allows for saving time and electricity. We recommend the

use of powder detergent.

• Bed & Bath

For washing home linen in a single cycle. It optimises the use of fabric

softener and allows for saving time and electricity. We recommend the

use of powder detergent.

• Shirts

Use the special wash cycle to wash shirts in dierent fabrics and

colours to guarantee they receive the best possible care.

• Business

Program for clothes used infrequently or only slightly dirty (do not use

for dry clean garment).

Follow the instructions of the garment’s wash care label.

• Baby

Use the special wash cycle to remove the remove the soiling typically

caused by babies, while removing all traces of detergent from nappies

in order to prevent the delicate skin of babies from suering allergic

reactions. The cycle has been designed to reduce the amount of

bacteria by using a greater quantity of water and optimising the eect

of special disinfecting additives added to the detergent.

• Duvet

Designed for washing eiderdown padded items such as double or

single duvets, cushions and anoraks. It is recommended to load such

padded items in the drum with the edges folded inwards and not to

exceed ¾ of the drum’s volume. For optimal washing, we recommend

using a liquid detergent.

• Silk & Curtains

use special wash cycle to wash all silk garments or curtains. We

recommend the use of special detergent which has been designed to

wash delicate clothes.

For washing curtains, fold and place them in a pillow case or mesh bag.

• Jeans

Turn garments inside-out before washing and use a liquid detergent.

• Rapid 15 min

for washing lightly soiled garments in a short time. Not suitable for

wool, silk and garments to be washed by hand.

• Cuddly toys

With this program it is possible to remove dust more easily and wash

better cuddle toys.

Spin & Drain

Spins the load then empties the water. For resilient garments. If you

exclude the spin cycle, the machine will drain only

Rinse & Spin

Rinse the clothes and start the spin cycle. For resistant clothing.

Steam Refresh

The garments will be damp once the cycle is completed, so we recommend

hanging them to dry (2 kg, roughly 3 items). This programme refreshes

garments by removing bad odours and relaxing the bres. Insert dry items

only (that are not dirty) and select programme “Steam Refresh”. Garments

will be a little damp at the end of the cycle and can be worn after a few

minutes. The “Steam Refresh” programme makes ironing easier.

! Do not add softeners or detergents.

! Not recommended for wool or silk garments.

20°C

For washing lightly soiled cotton garments, at a temperature of 20 °C.

Wool - Woolmark Apparel Care - Green:

The “Wool” wash cycle is approved by the Woolmark Company for

washing wool garments classied as “hand-washable”, provided that the

wash complies with the instructions appearing on the garment’s label

and with those provided by the manufacturer of this washing machine.

(M )1135

Anti Allergy

Suitable for removing major allergens such as pollen, mites and cat or dog hair.

DISPLAY

The display is useful when programming the washing machine and

provides plenty of information.

COTTON

--:--

1:40

140040°

C D

By pressing the and buttons, it is possible to select the desired

option and conrm it with the button.

The rst time the machine is switched on, you will be asked to select the

language and the display will automatically display the language selection

menu.

To select the desired language, press the and buttons; to conrm

the selection, press the button.

Area A will display the following: the icon and selected washing programme,

the washing phases and the time remaining to the end of the wash cycle.

Area B will display: the selected options, the energy and water consumption

for the chosen cycle and the button lock symbol.

Area C will display the default temperature value on the basis of the set

programme; if the programme does not include the setting of the

1. Top

2. Detergent dispenser drawer

3. Control panel

4. Handle

5. Porthole door

6. Drain pump (behind the plinth)

7. Plinth (removable)

8. Adjustable feet (2)

DETERGENT DISPENSER DRAWER

compartment 1: Pre-wash detergent

(powder)

compartment 2: Detergent for the wash cycle

(powder or liquid)

If liquid detergent is used, it is recommended

that the removable plastic partition A (supplied)

be used for proper dosage.

If powder detergent is used, place the partition

into slot B.

compartment 3: Additives (fabric softeners, etc.)

The fabric softener should not overow the grid.

! Use powder detergent for white cotton garments, for pre-washing, and

for washing at temperatures over 60°C.

! Follow the instructions given on the detergent packaging.

PRODUCT DESCRIPTION

temperature, the area will display the “ ” symbol.-- °

Area D will display the default spin cycle speed on the basis of the set

programme; if the programme does not include the setting of the spin

cycle, the area will display the “ ” symbol.--

Area E will display the time remaining to the start of the selected

programme if the DELAYED START function was set.

Pressing and holding button for 3 seconds allows for memorising one or F

more preferred wash cycles.

To use the memorised cycles, turn the knob to position .13

Pressing button allows for accessing the menu from which to set G

additional washing options.

Pressing and holding button for 3 seconds allows for accessing the G

settings menu:

- Language: by pressing the and buttons, the user can select the

desired language and conrm it with the button.

- Sound: by pressing the and buttons, the user can activate or

deactivate the sound of the buttons and conrm it with the button.

- Display brightness: by pressing the and buttons, the user can

select the type of display brightness and conrm it with the button.

- Restoring the factory settings: pressing and holding the button for 5

seconds restores the factory settings.

! During a wash cycle if the user does not interact with the display for 5

minutes, the SCREEN SAVER will activate. To return to the previous window,

simply press any button.

Pressing button allows for accessing the menu from which to set the H

washing machine remotely by external device.

Wi Setup (not applicable in Russia)

To enable the appliance to be remotely controlled, you rst have to

complete successfully the connectivity set up process. This process is

necessary to register your appliance and connect to your home network.

The setup procedure has to be carried out only once. You have to carry it

out again only if you change your router setup properties (network name

and password).

Minimum requirements

Smart device: Android with a 1280x720 (or higher) screen or iOS.

See on App store the App compatibility with Android or iOS versions.

Wireless router: 2.4Ghz WiFi b/g/n.

RESET TO FACTORY DEFAULT OPERATION

For restoring the factory settings press and hold the button select the G ,

menu holding the botton for 3 seconds.

By pressing the and buttons, scroll down until “Factory Def.” and

select it with the button .

Press again the button for 5 seconds to conrm the reset to factory

default settings.

Note: the appliance should then reset and ask again the language

selection, select the desired language and conrm it with the button.

HOW TO SETUP

To use this feature you need to own: a smart phone or a tablet and a

wireless router connected to internet. Please verify with your smart device

that the signal strength of your home wireless network close to the

appliance is good.

1. Download the Hotpoint Home Net app.

The rst step to get your appliance connected is to download the app for

your mobile device. The Hotpoint Home Net app will be your guide and

walk you through all of the steps listed here. You can download the

Hotpoint Home Net app by visiting either iTunes or Google Play and

follow the instructions from app to create an account, connect and

The SAID code is used to sync a smart device with your appliance. MAC

Address is displayed for the Wi-Fi module.

The pairing procedure has to carry out again only if you change your

router set up properties (network name or password or data provider).

DISPLAY INDICATORS

Failure: Call Service

Refer to Troubleshooting section

Failure: Water lter clogged

Water cannot be drained; water lter might be blocked

Failure: No water

No or not sucient inlet water.

In the event of any failure, refer to the “Troubleshooting” section.

Key Lock

To activate the control panel lock, press and hold the button for

roughly 3 seconds. When the display visualises “KEY LOCK”, the control

panel is locked (except for the ON/OFF button ). This will prevent

accidental modications to wash cycles, especially when children are at

home. To deactivate the control panel lock, press and hold the

button for approximately 3 seconds.

Locked door indicator

When lit, the symbol indicates that the door is locked. To prevent any

damage, wait until the symbol turns o before opening the door.

To open the door while a cycle is in progress, press the START/PAUSE

button ; if the symbol is o, the door can be opened.

FIRST-TIME USE

Once the appliance has been installed, and before you use it for the rst

time, run a wash cycle with detergent and no laundry, using the wash

cycle .White (60°)

DAILY USE

Prepare the laundry by following the suggestions appearing under the

“TIPS AND SUGGESTIONS” section.

- Press the ON/OFF button HOTPOINT” will appear on the display.; “

- Open the door. Load the laundry while making sure not to exceed the

maximum load quantity indicated in the wash cycle table.

- Pull out the detergent dispenser drawer and pour the detergent into the

relevant compartments, as described in the “DETERGENT DISPENSER

DRAWER” section.

- Close the door.

- The machine automatically selects the default temperature and spin

speed set for the selected wash cycle.

- Select the desired wash cycle.

- Select the desired options.

STARTING CYCLE

Press the START/PAUSE button.

The machine will lock the door ( symbol on) and the drum will start to

rotate; the door will be unlocked ( symbol OFF) and then locked again (

symbol on) as preparation phase of each washing cycle. The “Clicking”

noise is part of the door locking mechanism. Water will enter the drum

and start the washing phase once the door is locked.

PAUSING A CYCLE

To pause the wash cycle, press the START/PAUSE button again. To start

the wash cycle from the point at which it was interrupted, press the

START/PAUSE button again.

OPENING THE DOOR, IF NECESSARY

Once a cycle starts, the symbol turns on to signal that the door cannot

be opened. While a wash cycle is running, the door remains locked. To

open the door while a cycle is under way, for example, to add or remove

garments, press the START/PAUSE button to pause the cycle. If the

symbol is not lit, the door may be opened. Press the START/PAUSE

button again to continue the cycle.

ADDING GARMENTS

An icon on the display will signal when additional garments can be

introduced into the washing machine, without decreasing the washing

performance. To add garments, rst stop the washing machine by pressing

the START/PAUSE button then open the door and insert them.

Press the START/PAUSE button again to restart the wash cycle from

the point at which it was interrupted.

CHANGING A RUNNING WASH CYCLE

To change a wash cycle while it is in progress, pause the washing machine

using the START/PAUSE button, then select the desired cycle and press

the START/PAUSE button again.

! To cancel a cycle that has already begun, press and hold the ON/OFF

button. The cycle will be stopped and the machine will switch o.

AT THE END OF THE WASH CYCLE

This will be indicated by the word “ ” on the display; when the CYCLE END

symbol switches o, the door may be opened. Open the door, unload the

laundry and switch o the machine. If you do not press “ON/OFF” button,

the washing machine will switch o automatically after about a 10 minutes.

OPTIONS

- If the selected option is incompatible with the set wash cycle or with

another previously selected option, in the menu the name of

incompatible option is represented in grey color and the wording “Not

available” will appear on the display, accompanied by a buzzer, the

option will not be activated.

Steam Hygiene

This option enhances washing performance by generating steam during

the wash cycle to remove any bacteria from the bres, which are treated

at the same time. Place the laundry in the drum, choose a compatible

programme and select option Steam Hygiene.

! The steam generated during the operation of the washing machine may

cause the porthole door to become hazy.

Start Delay

To set a delayed start for the selected cycle, press the corresponding

button repeatedly until the desired delay period is reached. When this

option has been activated, the selected values of delay start will appear

on the display. To remove the delayed start setting, press the button until

Product specificaties

Merk:	Hotpoint
Categorie:	Wasmachines
Model:	NLLCD 1064 DGD AW UK N

Heb je hulp nodig?

Als je hulp nodig hebt met Hotpoint NLLCD 1064 DGD AW UK N stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Wasmachines Hotpoint

Hotpoint NSWM 863C BS UK Handleiding

4 Oktober 2022

Hotpoint NSWR 943C GK UK Handleiding

4 Oktober 2022

Hotpoint NSWF 743U W UK Handleiding

4 Oktober 2022

Hotpoint NSWM 843C GG UK N Handleiding

4 Oktober 2022

Hotpoint WMUD 962G Handleiding

4 Oktober 2022

Hotpoint Maxi ECO9F 1491 Handleiding

4 Oktober 2022

Hotpoint WMBF 944G UK Handleiding

4 Oktober 2022

Hotpoint Maxi WMD 742 Handleiding

4 Oktober 2022

Hotpoint NSWJ 742U W UK Handleiding

4 Oktober 2022

Hotpoint Aqualtis AQ94D 49 D Handleiding

4 Oktober 2022

Handleiding Wasmachines

Nieuwste handleidingen voor Wasmachines

Speed Queen FA3080 Handleiding

4 Oktober 2022

Indesit IWC 61281 ECO DE Handleiding

4 Oktober 2022

Hoover VHDFS 610-30 Handleiding

4 Oktober 2022

Zerowatt E 41 Handleiding

4 Oktober 2022

Whirlpool AWE 4318 Handleiding

4 Oktober 2022

Speed Queen FA2230 Handleiding

4 Oktober 2022

Kenmore 796.31402 Elite Handleiding

4 Oktober 2022

Hoover HNF 9167-16S Handleiding

4 Oktober 2022

Sharp ES-U10HT Handleiding

4 Oktober 2022

Whirlpool FWG71284W PL Handleiding

4 Oktober 2022