Hotpoint FDEU 9640 P UK Handleiding

Hotpoint Wasmachine FDEU 9640 P UK

Lees hieronder de 📖 handleiding in het Nederlandse voor Hotpoint FDEU 9640 P UK (4 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Quick Guide

THANK YOU FOR PURCHASING A HOTPOINT PRODUCT.

To receive more comprehensive assistance, register the

appliance on

www.hotpoint.co.uk/register

Before using the appliance carefully read the Health and Safety guide.

Before using the machine, it is imperative that the transport bolts are removed. For more

detailed instructions on how to remove them, see the Installation Guide.

CONTROL PANEL

PRODUCT DESCRIPTION

1. Top

2. Detergent dispenser drawer

3. Control panel

4. Handle

5. Porthole door

6. Drain pump (behind the plinth)

7. Plinth (removable)

8. Adjustable feet (2)

DETERGENT DISPENSER DRAWER

Compartment *:

Do not insert detergent in this compartment.

Compartment 1: Washing detergent (powder

or liquid)

If liquid detergent is used, the removable plastic partition

A (supplied) should be used for proper dosage.

If powder detergent is used, place the partition

into slot .B

Compartment 2: Additives (fabric softeners, etc.)

The fabric softener must not exceed the “MAX” level.

! Use powder detergent for white cotton

garments, for pre-washing, and for washing at temperatures over 60°C.

! Follow the instructions given on the detergent packaging.

WASH CYCLE TABLE

1. ON/OFF button

2. TEMPERATURE knob

3. DRYING knob

4. WASH CYCLE PROGRESS indicator lights

5. DOOR LOCKED indicator light

6. START/PAUSE button and indicator light

7. FUNCTION buttons and indicator lights

8. WASH CYCLE SELECTOR KNOB

Maximum load 9 kg

Power input in o mode 0.5 W / in left-on mode 8 W

Detergents and

Additives

Recommended

detergent

Wash cycle Temperature Max.

spin speed

(rpm)

Max.

load

(kg)

Duration

(minutes) Drying Wash Fabric

softener Powder Liquid

Default Range 1 2

1 Anti-Stain 40°C - 40°C 1400 5 185    –

2 Anti-Stain Quick 40°C - 40°C 1200 4,5 60    –

3 Whites 60°C - 90°C 1400 5 170     

4 Cotton (2) 40°C - 60°C 1400 9 235     

5 Eco Cotton (1) 60°C - 60°C 1400 9 225     

6 Synthetics (3) 40°C - 60°C 1000 4,5 125    –

7 Anti Allergy 60°C - 60°C 1400 5 210     

8 Wool 40°C - 40°C 800 2 90    –

9 Delicates 30°C - 30°C 0 1 80    –

10 Fast Wash 30’ 30°C - 30°C 800 3,5 30 –   –

11 Wash & Dry 45’ 30°C - 30°C 1400 1 45    –

12 Drying Cotton – – – 6 – – – – –

13 Drying Synthetics – – – 4 – – – – –

14 Drying Wool – – – 2 – – – – –

Rinse – – 1400 9 50 –– –

Spin+Pump out – – 1400 9 10 – – – –

 Required dosage Optional dosage

For all testing institutes:

2) Long cotton cycle: set wash cycle 4 with a temperature of 40°C.

3) Long synthetics cycle: set wash cycle 6 with a temperature of 40°C.

The cycle duration indicated on the display or instruction manual is an estimate based on

standard conditions. The actual duration may vary in relation to several factors, such as

the temperature and pressure of the incoming water, ambient temperature, amount of

detergent, load quantity and type, load balancing and any additional options selected.

1) Test programme in compliance with standard EN 50229 (Wash):

This cycle is designed for normally soiled cotton loads and is the most ecient in terms of

both electricity and water consumption; it should be used for garments washable at 60°C or

at 40°C. The actual washing temperature may dier from the indicated value.

Test programme in compliance with standard EN 50229 (Drying): select the “Cotton”

drying programme and set the drying level to “ ”, for both loads. The rst drying cycle must

be carried out with the nominal load.

Fabric

type Load type Max.

load (kg)

Cupboard

dry

Henger

dry

Iron

dry

Cotton

Clothing of di e-

rent sizes, Terry

towels

6 255 230 200

Synthe-

tics

Sheets, Shirts, Pyja-

mas, socks, etc. 4 220 200 190

Wool 2 210 190 180Knitwear, Pullovers. etc.

WASH CYCLES

Follow the instructions on the symbols of the garment’s wash

care label. The value indicated in the symbol is the maximum

recommended temperature for washing the garment.

Anti-Stain

this programme is suitable to heavily-soiled garments with resistant

colours. It ensures a washing class that is higher than the standard class

(A class). When running the programme, do not mix garments of dierent

colours. We recommend the use of powder detergent. Pre-treatment with

special additives is recommended if there are obstinate stains.

If the drying function is selected, a drying cycle automatically activates at

the end of the wash cycle that resembles open-air drying, with the added

advantages of preserving garments from yellowing due to sunlight

exposure and preventing loss of whiteness caused by the possible

presence of dust in the air. Drying cycles can only be selected on a level

basis. Dryness level “ ” recommended.

Anti-Stain Quick

this programme is ideal for washing the most dicult daily stains in 1

hour. It is ideal for mixed fabrics and coloured garments, caring for your

clothes as it washes.

If the drying function is selected, a drying cycle automatically activates at

the end of the wash cycle that resembles open-air drying, with the added

advantages of preserving garments from yellowing due to sunlight

exposure and preventing loss of whiteness caused by the possible

presence of dust in the air. Drying cycles can only be selected on a level

basis. Dryness level “ ” recommended.

Whites

for heavily soiled whites and resistant colours.

Eco Cotton

Suitable for washing moderately soiled cotton garments. At 40°C and

60°C it is the standard cycle for washing cotton garments, and is the most

ecient in terms of combined water and electricity consumption.

Synthetics

Suitable for washing moderately soiled garments made of synthetic bres

(e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton bres.

Anti Allergy

Suitable for removing major allergens such as pollen, mites and cat or

dog hair.

Wool - Woolmark Apparel Care - Green:

the wool wash cycle of this machine has been approved by The

Woolmark Company for the washing of wool garments labelled as “hand

wash” provided that the products are washed according to the

instructions on the garment label and those issued by the manufacturer

of this washer-dryer (M1318)

Delicates

use programme to wash very delicate garments with decorative features, such

as diamantes and sequins.

We recommend turning the garments inside out before washing and

placing small items into the special bag for washing delicates.

When selecting an exclusively time-based drying function, a drying cycle

is performed at the end of the wash cycle that is particularly delicate,

thanks to light handling and appropriate temperature control of the

water jet.

The recommended durations are:

1 kg of synthetic garments --> 150 min

1 kg of synthetic and cotton garments --> 180 min

1 kg of cotton garments --> 180 min

The degree of dryness depends on the load and fabric composition.

Fast Wash 30’

For washing lightly soiled garments in a short time. Not suitable for wool,

silk and garments to be washed by hand.

Wash & Dry 45’

select programme for washing and drying lightly soiled garments (Cotton

and Synthetics) in a short time. This cycle may be used to wash and dry a

laundry load of up to 1 kg in just 45 minutes. To achieve optimum results,

use liquid detergent and pre-treat cus, collars and stains.

Drying Cottons

To dry cotton garments.

Drying Synthetics

To dry synthetics garments.

Drying Wool

To dry wool garments.

Rinse

Designed for rinsing and spinning.

Spin + Pump out

Designed for spinning and draining the water.

INDICATOR LIGHTS

The indicator lights provide important information. This is what they can tell you:

Wash cycle phase indicator lights

Once the desired wash cycle has been selected and has begun, the

indicator lights switch on one by one to indicate which phase of the cycle

is currently in progress.

Note: during the “Drain” phase, the indicator light corresponding to the

“Spin” cycle phase will illuminate.

Door locked indicator light

If this indicator light is on, the appliance door is locked to prevent it from

being opened accidentally; to avoid any damage, wait for the indicator

light to switch o before you open the appliance door (wait

approximately 3 minutes).

! If the START/PAUSE indicator light (orange) ashes rapidly at the

same time as the function indicator light, this indicates a problem has

occurred (see “Troubleshooting”).

FIRSTTIME USE

Once the appliance has been installed, and before it is used for the rst

time, run a wash cycle with detergent and no laundry, by setting the

“Auto-Clean” cycle.

DAILY USE

Prepare the laundry by following the suggestions appearing under the

“TIPS AND SUGGESTIONS” section.

- Press the ON/OFF button ; all the indicator lights will turn on for a few

seconds, then only the indicator lights relative to the selected programme

settings will remain lit and the START/PAUSE indicator light will ash.

- Open the door. Load the laundry while making sure not to exceed the

maximum load quantity indicated in the wash cycle table.

- Pull out the detergent dispenser drawer and pour the detergent into the

relevant compartments, as described in the “DETERGENT DISPENSER

DRAWER” section.

- Close the door.

- Select the desired wash cycle.

- Set the washing temperature.

- Select the desired options.

- Press the START/PAUSE button to start the wash cycle; the relative

indicator light will light up steady green and the door will lock (the

indicator light will switch on).

PAUSING A CYCLE

To pause the wash cycle, press the START/PAUSE button again; the

indicator light will ash amber. To start the wash cycle from the point at

which it was interrupted, press the START/PAUSE button again.

OPENING THE DOOR, IF NECESSARY

Once a cycle starts, the indicator light turns on to signal that the door

cannot be opened. While a wash cycle is running, the door remains

locked. To open the door while a cycle is under way, for example, to add

or remove garments, press the START/PAUSE button to pause the

cycle; the indicator light will ash amber. If the indicator light is not lit,

the door may be opened (wait approximately 3 minutes). Press the START/

PAUSE button again to continue the cycle.

CHANGING A RUNNING WASH CYCLE

To change a wash cycle while it is in progress, pause the washer-dryer

using the START/PAUSE button (the relative indicator light will ash

amber), then select the desired cycle and press the START/PAUSE

button again.

! To cancel a cycle that has already begun, press and hold the ON/OFF

button. The cycle will be stopped and the machine will switch o.

AT THE END OF THE WASH CYCLE

At the end of the wash cycle the indicator light will switch on; when

the indicator light switches o, the door may be opened (wait

approximately 3 minutes). Open the door, unload the laundry and switch

o the machine. If you do not press ON/OFF button, the washer-dryer

will switch o automatically after about a half of an hour.

OPTIONS

- If the selected function is not compatible with the programmed wash

cycle, the corresponding indicator light will ash and a sound alert (3

beeps); the function will not be activated.

- If a function which is incompatible with another function selected

previously, only the most recent selection will remain active.

Wash

Rinse

Spin

Drying

End of wash cycle

Note: as soon as a drying

level or time period has

been set, this indicator light

illuminates to indicate that

the selected wash cycle will

be followed by a drying

phase.

END

Super Wash

This option oers a high-performance wash due to the greater quantity of

water used in the initial phase of the cycle, and due to the increased wash

cycle duration, is particularly useful for the removal of stubborn stains.

Slow Spin

By selecting this function, reduces the spin speed.

Timer Saver

If you select this option, the wash cycle duration will be reduced by up to

50%, depending on the selected cycle, thereby guaranteeing simultaneous

water and energy saving. Use this cycle for lightly soiled garments.

Eco Wash

The Eco Wash option saves energy by not heating the water used to wash

your laundry – an advantage both to the environment and to your energy

bill. Instead, intensied wash action and water optimisation ensure great

wash results in the same average time of a standard cycle. For the best

washing results we recommend the usage of a liquid detergent.

By also turning the DRYING knob to the position, a drying cycle

automatically activates at the end of the wash cycle that also helps to

reduce energy consumption, thanks to an optimal combination of air

temperature and cycle duration.

Temperature

Turn the TEMPERATURE knob to set the wash temperature (see Table of

wash cycles).

The temperature may be lowered, or even set to a cold wash ( ). The

washer-dryer will automatically prevent you from selecting a temperature

which is higher than the maximum value set for each wash cycle.

Drying

Turn the DRYING knob to set the desired drying type.

Two options are available:

A - Based on time: from to minutes.40 180

B - Based on the how damp the clothes are once they have been dried:

Iron : slightly damp clothes, easy to iron.

Hanger : dry clothes to put away.

Cupboard : very dry clothes, recommended for towelling and

bathrobes.

If your laundry load to be washed and dried is much greater than the

maximum stated load perform the wash cycle, and (see adjacent table),

when the cycle is complete, divide the garments into groups and put

some of them back in the drum. At this point, follow the instructions

provided for a “ ” cycle. Repeat this procedure for the Drying only

remainder of the load.

N.B: when the drying is complete there is a cooling period, even though

the DRYING knob is in the position.

Drying only

Turn the WASH CYCLE knob to one of the drying settings ( ) 12-13-14

according to the type of fabric, then select the desired drying duration

using the DRYING knob.

Selecting the cotton drying cycle ( position) through the programme

selector knob and pressing the “Eco” button activates an automatic drying

cycle that allows for saving energy, thanks to an optimal combination of air

temperature and cycle duration.

TIPS AND SUGGESTIONS

Divide the laundry according to:

Type of fabric (cotton, mixed bres, synthetics, wool, garments to be

hand-washed). Colour (separate coloured garments from whites, wash

new coloured garments separately). Delicates (small garments – such as

nylon stockings – and items with hooks – such as bras: insert them in a

fabric bag).

Empty the pockets:

Objects such as coins or lighters can damage the washer-dryer and the

drum. Check all buttons.

CARE AND MAINTENANCE

Before performing cleaning and maintenance, switch the washer-dryer o

and disconnect it from the mains power. Do not use ammable liquids to

clean the washer-dryer.

Cutting o the water and electricity supplies

Close the water tap after every wash. This will limit wear on the hydraulic

system inside the washer-dryer and help to prevent leaks.

Unplug the washer-dryer when cleaning it and during all maintenance

work.

Cleaning the washer-dryer

The outer parts and rubber components of the appliance can be cleaned

using a soft cloth soaked in lukewarm soapy water. Do not use solvents or

abrasives.

The washer-dryer has a “Auto-Clean” cycle for its internal parts; it must be

run without any load in the drum.

To optimise this cycle, it is possible to use either detergent (10% of the

quantity specied for lightly soiled garments) or special additives to clean

the washer-dryer. We recommend running a cleaning cycle every 40 wash

cycles.

To start the cycle press buttons “Super Wash” and “Slow Spin”

simultaneously for 5 seconds.

The cycle will start automatically and will run for about 70 minutes. To

stop the cycle, press the START/PAUSE button.

Cleaning the detergent dispenser drawer

Remove the dispenser drawer by lifting and pulling it outwards. Wash it

under running water; this procedure should be eected regularly.

Caring for the door and drum

Always leave the porthole door ajar in order to prevent unpleasant odours

from forming.

Cleaning the pump

The washer-dryer is tted with a self-cleaning pump that does not require

any maintenance. Small items (such as coins or buttons) may sometimes

fall into the protective pre-chamber situated at the base of the pump.

! Make sure that the wash cycle has ended and unplug the appliance.

To access the pre-chamber:

1. remove the covering panel on the front side of the machine by

inserting a screwdriver in the centre and sides of the panel and using it as

a lever;

2. loosen the drainage pump cover by turning it anti-clockwise: it is

normal for some water to leak out;

3. clean the inside thoroughly;

4. screw the cover back on;

5. put the panel back in place, making sure the hooks slot in place before

pushing the panel onto the appliance.

Checking the water inlet hose

Check the water inlet hose at least once a year. If it is cracked or broken, it

must be replaced: during wash cycles, the high pressure of the water

could suddenly split the hose open.

! Never use hoses that have already been used.

LOAD BALANCING SYSTEM

Before every spin cycle, to avoid excessive vibrations before every

spin and to distribute the load in a uniform manner, the drum rotates

continuously at a speed which is slightly greater than the washing

rotation speed. If, after several attempts, the load is not balanced

correctly, the machine spins at a reduced spin speed. If the load is

excessively unbalanced, the washer-dryer performs the distribution

process instead of spinning. To encourage improved load distribution and

balance, we recommend small and large garments are mixed in the load.

ACCESSORIES

Contact our Technical Assistance Service to check whether the following

accessories are available for this washer-dryer model.

Stacking kit

With this accessory you can secure the tumble dryer to the upper part of

your washer-dryer to save space and facilitate loading and unloading of

the tumble dryer.

TRANSPORT AND HANDLING

Do not lift the washer-dryer by gripping it from the upper section.

Unplug the appliance and close the water tap. Check that the door and

detergent dispenser drawer are tightly closed. Detach the lling hose

from the water tap then detach the drain hose. Empty all the water

remaining in the hoses and secure the latter so that they do not get

damaged during transport. Apply the transport bolts back on. Repeat, in

reverse order, the transport bolt removal procedure described in the

“Installation instructions”.

Important: Not emptying contents from pockets may cause pump or drain

blockages, or may damage the machine.

Do not wash items which do not have a wash label, or wash items that are

not intended as machine washable.

Product specificaties

Merk:	Hotpoint
Categorie:	Wasmachine
Model:	FDEU 9640 P UK

Heb je hulp nodig?

Als je hulp nodig hebt met Hotpoint FDEU 9640 P UK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Wasmachine Hotpoint

Hotpoint NF95W IT N Handleiding

16 November 2024

Hotpoint NBT 946 WM A IT Handleiding

16 November 2024

Hotpoint NFR527W Handleiding

16 November 2024

Hotpoint NBT 1048 WD A IT Handleiding

6 Oktober 2024

Hotpoint NBT 108 BLACK IT Handleiding

6 Oktober 2024

Hotpoint NG 847 WM A IT Handleiding

5 September 2024

Hotpoint NR 748G WS A IT Handleiding

5 September 2024

Hotpoint TL R4256BS Handleiding

5 Juli 2024

Hotpoint NLCD 948 WC A \ Handleiding

5 Juli 2024

Hotpoint NDD 9636 BDA EE Handleiding

12 April 2024

Handleiding Wasmachine

Nieuwste handleidingen voor Wasmachine

Otsein LB LTO129A Handleiding

21 November 2024

Otsein LB LTO109A Handleiding

21 November 2024

Otsein-Hoover LB HV16ESALU Handleiding

21 November 2024

Sangiorgio ST6512EL Handleiding

21 November 2024

Sangiorgio FS614D9 Handleiding

21 November 2024

Sangiorgio PROGETTO F4 Handleiding

21 November 2024

Sangiorgio SG710 Handleiding

21 November 2024

Sangiorgio F814DIBC Handleiding

21 November 2024

Sangiorgio F812D Handleiding

21 November 2024

Sangiorgio F812L Handleiding

21 November 2024