Hotpoint BI WMWG 81484 UK Handleiding

Hotpoint Wasmachine BI WMWG 81484 UK

Lees hieronder de 📖 handleiding in het Nederlandse voor Hotpoint BI WMWG 81484 UK (4 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

1 “ON/OFF” button

2 Programme selector

3 “Start/Pause” button

4 “Spin” button

5 “Intensive rinse” button

6 “Clean+” button

7 “Start delay” button

8 “FreshCare+” /

“Key lock“button

9 “Temperature” button

DISPLAY INDICATORS

Pre-wash activated

Door locked

FreshCare+ activated

Start delay activated

Key lock activated

Washing phase

Indicates washing phase of the cycle

Failure: Call Service

Refer to Troubleshooting section

Failure: Water lter clogged

Water cannot be drained; water lter

might be blocked

Failure: No water

No or not sucient inlet water.

In the event of any failure, refer to the

“TROUBLESHOOTING” section

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance,

please register your appliance on

www.whirlpool.eu/register

Before using the appliance carefully read the Safety Instruction.

Before using the machine, it is imperative that the transport bolts are removed. For more detailed

instructions on how to remove them, see the Installation Guide.

CONTROL PANEL

PROGRAMME CHART

PRODUCT DESCRIPTION

1. Worktop

2. Detergent dispenser

3. Control panel

4. Door handle

5. Door

6. Water lter

7. Adjustable feet (4)

DETERGENT DISPENSER

Compartment 1: Pre-wash detergent (powder)

Compartment 2: Washing detergent

(powder or liquid)

Compartment 3: Additives (fabric softeners,

etc.)

The fabric softener must not exceed the “MAX”

level.

! Use powder detergent for white cotton

garments, for pre-washing, and for washing at

temperatures over 60°C.

! Follow the instructions given on the detergent packaging.

Quick guide

+1 +2 +3 312

21 53

Max load 8 Kg

Power consumption in o -mode 0.5 W / in left-on mode 8 W Detergents and additives Recommended

detergent

Residual

dampness % (**)

Energy

consumption

kWh

Total water lt

Laundry

temperature °C

Programme

Temperatures Max. spin

speed

(rpm)

Max

load

(kg)

Duration

(h : m)

Pre-

wash

Main

wash Softener

Powder Liquid

Setting Range 1 2 3

Mixed 40°C - 40°C 8,0 *** –1000   –– – – –

White 60°C - 90°C 8,01400 2:45     (90°) 49 0,9 90 55

Cotton 40°C - 60°C 8,01400 3:55 –    49 1,0 90 40

Eco 40-60 40 °C 40°C

1351 8,0 3:30 –    53 0,77 54 33

1351 4,0 2:45 –    53 0,65 52 36

1351 2,0 2:10 –    53 0,45 37 33

Sport 40°C - 40°C 4,0 *** –600   –– – – –

Duvet 30°C - 30°C 3,5 *** –1000   –– – – –

20°C 20 °C - 20 °C 1400 8,0 1:50 –  –49 0,16 90 22

Spin & Drain – – 8,0 *** – – – – – – – – –1400

Rinse & Spin – – 8,0 *** – –1400 – – – – – –

Rapid 30’ 30°C - 30°C 4,5 0:30 –1200(****)   –71 0,2 45 27

Colours 15° 15°C 15°C 4,5 *** – 1000   –– – – –

Wool 40°C - 40°C 2 *** –800   –– – – –

Delicates 30°C - 30°C 1 *** –600(****)   –– – – –

Synthetics 40°C - 60°C 41200 2:55 –    35 0,75 55 43

  Dosing required Dosing optional

3.2.

** After programme end and spinning with maximum selectable spin speed, in default

programme setting.

*** The duration of the programme is shown on the display.

**** The display will show the suggested spin speed as default value.

6th Sense - the sensor technology adapts water, energy and programme duration to your wash load.

This data may dier in your home due to changing conditions in inlet water temperature,

water pressure etc. Approximate programme duration values refer to the default setting of

the programmes, without options.

The values given for programmes other than the Eco 40-60

programme are indicative only.

Eco 40-60 - Test wash cycle in compliance with EU Ecodesign regulation 2019/2014. The most

efficient programme in terms of energy and water consumption for washing normally soiled cotton

laundry.

Note: spin speed values shown on the display can slightly differs from the values stated in the table.

For all Test Institutes

Long wash cycle for cottons: set wash cycle with a temperature of 40°C.Cotton

Synthetic program along: set wash cycle with a temperature of 40°C.Synthetics

PROGRAMMES

For choosing the appropriate programme for your kind of

laundry, always respect the instructions on the care labels

of the laundry. The value given in the tub symbol is the

maximum temperature possible for washing the garment.

Mixed

For washing lightly to normally soiled resilient garments in cotton, linen,

synthetic bres and mixed bres.

White

For washing normally to heavily soiled towels, underwear, table and bed

linen, etc in resilient cotton and linen. Only when the temperature is

selected at 90°C the cycle is provided with a prewash phase before main

washing phase. In this case it is recommended to add detergent both, in

the prewash and main wash section.

Cotton

Normally to heavily soiled and robust cottons .

Eco 40-60

For washing normally soiled cotton garments declared to be washable

at 40 °C or 60 °C, together in the same cycle. This is the standard cotton

programme and the most ecient in terms of water and energy

consumption.

Sport

For washing lightly soiled sports clothing (tracksuits, shorts, etc.). For best

results, we recommend not exceeding the maximum load indicated in

the ‚‘‘PROGRAMME CHART‘‘. We recommend using liquid detergent , and

adding the amount suitable for half-load.

Duvet

Designed for washing eiderdown padded items such as double or single

duvets, cushions and anoraks. It is recommended to load such padded

items in the drum with the edges folded inwards and not to exceed ¾ of

the drum’s volume. For optimal washing, we recommend using a liquid

detergent.

20 °C

For washing lightly soiled cotton garments, at a temperature of 20 °C.

Spin & Drain

Spins the load then empties the water. For resilient garments. If you

exclude the spin cycle, the machine will drain only

Rinse & Spin

Rinses and then spins. For resilient garments.

Rapid 30’

For washing lightly soiled garments quickly. This cycle lasts only 30

minutes, saving time and energy.

Colours 15°

This cycle helps protect colours by washing in cold water (15°C) and uses

less energy to heat the water while still oering satisfactory wash results.

Suitable for lightly soiled, ustained garments. This cycle oers wash

results comparable to 40°c mixed at just 15°C

Wool

All wool garments can be washed using programme ‚“Wool“ even

those carryng the “hand-wash only “ label. For best results, use special

detergents and do not exceed max kg declaration of laundry.

Delicates

For washing particularly delicate garments. Preferably turn garments

inside out before washing.

Synthetics

For washing soiled garments made from synthetic bres (such as

polyester, polyacrylic, viscose, etc.) or cotton/synthetic blends.

FIRST TIME USE

To remove any manufacturing debris select the “Cotton” programme

at a temperature of 60°C. Pour a small quantity of detergent powder into

the main wash compartment of the detergent dispenser (maximum 2

1/3 of the quantity the detergent manufacturer recommends for lightly

soiled laundry). Start the programme without adding any laundry.

DAILY USE

Prepare your laundry according to the recommendations in the “HINTS

AND TIPS” section. Load the laundry, close the door, open the water

tap and press the “ON/OFF” button to switch the washing machine

on, the “Start/Pause” button ashes. Turn the programme selector

to the desired programme and select any option if needed. The

temperature and spin speed can be changed by pressing the “Temp.”

button or the “Spin Speed” button. Pull out the detergent dispenser and

add the detergent (and additives/softener) now. Observe the dosing

recommendations on the detergent pack. Then close the detergent

dispenser.

STARTING CYCLE

Press the “Start/Pause” button.

The machine will lock the door ( symbol on) and the drum will start to

rotate; the door will be unlocked ( symbol OFF) and then locked again (

symbol on) as preparation phase of each washing cycle. The “Clicking”

noise is part of the door locking mechanism. Water will enter the drum

and start the washing phase once the door is locked.

PAUSE A RUNNING PROGRAMME

To pause the wash cycle, press the “Start/Pause” ; the indicator light

will go o and the remaining time on display ash. To start the wash cycle

from the point at which it was interrupted press the button again.

OPEN THE DOOR, IF REQUIRED

After starting a programme, the “Door locked” indicator lights up to

show that the door can not be opened. As long as a wash programme is

running, the door remains locked. To open the door while a programme

is in progress, press the “Start/Pause” to pause the programme.

Provided the water level and/or temperature is/are not too high, the

“Door locked” indicator light goes o and you can open the door.

For example to add or remove laundry. Press the “Start/Pause” button

again to continue the programme.

PROGRAMME END

The “Door locked” indicator light goes o and the display shows

“End”. To switch o the washing machine after programme ends press

the “ON/OFF” button, the lights goes o. If you do not press “ON/

OFF” button, the washing machine will switch o automatically after

about a 10 minutes. Close the water tap, open the door and unload the

washing machine. Leave the door ajar to allow the drum to dry.

OPTIONS

! If the selected option is incompatible with the programme set,

the incompatibility will be signalled by a buzzer (3 beeps) and the

corresponding indicator light will ash.

! If the selected option is incompatible with another previously set

option, only the most recent selection will remain active.

Clean+

Clean+ is an option working on 3 dierent levels (Intensive, Daily

and Fast) that are specially designed to set the right washing action,

depending on your cleaning needs:

Intensive : this option is designed for high levels of dirtiness,

removing most stubborn stains.

Daily : this option is designed to remove everyday stains.

Fast : this option is designed to remove lightly soiled stains.

Intensive rinse

By selecting this option, the eciency of the rinse is increased and

optimal detergent removal is guaranteed. It is particularly useful for

sensitive skin. Press the button once, two or three times to select an

additional 1

, 2

or 3

rinses after the standard cycle rinse and

remove all traces of detergent. Press the button again to go back to the

“Normal rinse” rinse type.

Start delay

To set the selected programme to start at a later time, press the button

to set the desired delay time. Symbol lights on the display when this

fuction is enabled. To cancel the delayed start, press the button again

until the value ‚‘‘0‘‘ is shown on the display.

FreshCare+

This option enhances washing performance by generating steam

to inhibit the proliferation of the main bad odour sources inside the

machine. After steam phase, the washing machine will perform gentle

tumbling through slow rotations of the drum. FreshCare+ option starts

after the cycle ends for a maximum duration of 6h and you can interrupt

at any time by pressing any button on control panel or turning the knob.

(*) Wait around 5’ before open the door.

Temperature

Every programme has a predened temperature. If you want to change

the temperature, press the “Temp.” button. The value appears on the

display.

Spin

Every programme has a predened spin speed. If you want to change

the spin speed, press the “Spin Speed” button. The value appears on the

display.

Demo mode

To deactivate this function, switch the washing machine OFF. Than press

and hold “Start/Pause” button, within 5 seconds press also

“ON/OFF” button and hold both buttons for 2 seconds.

KEY LOCK

To lock the control panel, press and hold the “Key lock” button for

approximately 3 seconds. The symbol will light up on the display

to indicate that the control panel has been locked (with the exception

of the “ON/OFF“ button). This prevents unintentional changes to

programmes, especially with children near the machine. To unlock the

control panel, press and hold the “Key lock” button for approximately

3 seconds .

BLEACHING

If you wish to bleach the laundry, load the washing machine and set the

“Rinse & Spin” programme .

Start the machine and wait for it to complete the rst water lling cycle

(roughly 2 minutes). Put the machine in pause mode by pressing the

“Start/Pause” button, open the detergent drawer and pour the bleach

(observe the recommended doses indicated on the package) into the

main wash compartment where the partition was previously mounted.

Restart the cycle by pressing the “Start/Pause” button.

If desired, it is possible to add fabric softener into the appropriate

compartment of the detergent drawer.

HINTS AND TIPS

Sort your laundry according to

Type of fabric/care label (cotton, mixed bres, synthetics, wool, handwash

items). Colour (separate coloured and white items, wash new coloured

items separately). Delicates (wash small items – like nylon stockings – and

items with hooks – like bras – in a cloth bag or pillow case with zip).

Empty all pockets

Objects like coins or lighters can damage your laundry as well as the

drum.

Follow the dosage recommendation / additives

It optimizes the cleaning result, it avoids irritating residues of surplus

detergent in your laundry and it saves money by avoiding waste of

surplus detergent

Use low temperature and longer duration

The most ecient programmes in terms of energy consumption are

generally those that perform at lower temperatures and longer duration.

Observe the load sizes

Load your washing machine up to the capacity indicated in the

“PROGRAMME CHART” table to save water and energy.

Noise and remaining moisture content

They are inuenced by the spinning speed: the higher the spinning

speed in the spinning phase, the higher the noise and the lower the

remaining moisture content.

CLEANING & MAINTENANCE

For any cleaning and maintenance, switch o and unplug the washing

machine. Do not use ammable uids to clean the washing machine.

Clean and maintain your washing machine periodically (at least 4 times

per year).

Cleaning the outside of the washing machine

Use a soft damp cloth to clean the outer parts of the washing machine.

Do not use glass or general purpose cleaners, scouring powder or similar

to clean the control panel – these substances might damage the printing.

Checking the water supply hose

Check the inlet hose regularly for brittleness and cracks. If damaged,

replace it by a new hose available through our After-Sales Service or your

specialist dealer.

Cleaning the water lter / draining residual water

Switch o and unplug the washing machine, take out the kitchen plinth

before cleaning the water lter or draining residual water.

The kitchen plinth must be mounted back all the time once the cleaning

operation is over.

If you used a hot wash programme, wait until the water has cooled down

before draining any water. Clean the water lter regularly, to avoid that the

water cannot drain after the wash due to obstruction of the lter. If the water

cannot drain, the display indicates that the water lter may be clogged.

1 . Place a container close to the pump to collect any spillage.

2 . Remove, pulling it out, the “emergency drain hose” from the base

of the washing machine .

Remove the stopper of the “emergency drain hose” at the end of the hose

and let the water ow into the container.

3 . Turn the exhaust lter handle and pull it out of the housing .

When the container of plinth is full with water, plug the stopper to the

hose end, and reinsert the small hose in the washing machine’s base .

After, empty the container .

Afterwards rmly close the emergency drain hose with the stopper .

4. Remove lter: Lay a cotton cloth beneath the water lter, which can

absorb a small amount of rest water . Then remove the water lter by

turning it out anticlockwise .

5 . Clean the water lter: remove residues in the lter and clean it under

running water .

6 . Insert the water lter: Reinsert the water lter again by turning it in

clockwise direction . Make sure to turn it in as far as it goes; the lter

handle must be in vertical position . To test water tightness of the water

lter, you can pour about 1 liter of water into the detergent dispenser .

Then reinstall the kitchen plinth.

TRANSPORT AND HANDLING

Never lift the washing machine by holding it at the worktop.

Pull out the mains plug, and close the water tap. Make sure that door

and detergent dispenser are properly closed. Disconnect the inlet hose

from the water tap, and remove the drain hose from your draining point.

Remove all rest water from the hoses, and x them so that they cannot

get damaged during transport. Ret the transport bolts. Follow the

instructions for removing the transport bolts in the INSTALLATION GUIDE

in reverse order.

Quick guide

Product specificaties

Merk:	Hotpoint
Categorie:	Wasmachine
Model:	BI WMWG 81484 UK

Heb je hulp nodig?

Als je hulp nodig hebt met Hotpoint BI WMWG 81484 UK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Wasmachine Hotpoint

Hotpoint H6 08 GPOWER IT Handleiding

2 December 2024

Hotpoint NR 849G WS A IT Handleiding

2 December 2024

Hotpoint NG98W IT Handleiding

2 December 2024

Hotpoint NF746WK IT Handleiding

2 December 2024

Hotpoint H7 99 GPOWER IT Handleiding

2 December 2024

Hotpoint NBT 116 BLACK IT Handleiding

2 December 2024

Hotpoint NLCD 946 WC A EU N Handleiding

2 December 2024

Hotpoint BI WMHG 81485 EU Handleiding

2 December 2024

Hotpoint BI WDHG 861485 EU Handleiding

2 December 2024

Hotpoint NM11 846 WS A EU N Handleiding

2 December 2024

Handleiding Wasmachine

Nieuwste handleidingen voor Wasmachine

Asko w 6362 l tit Handleiding

5 December 2024

Asko W2084.W-2 Handleiding

5 December 2024

Bauknecht BPW 1014 A Handleiding

21 December 2024

Asko w 6362lt Handleiding

5 December 2024

Svan SL8201DD Handleiding

21 December 2024

Svan SLI8200D Handleiding

21 December 2024

Svan SL9401AIDB Handleiding

21 December 2024

Svan SL7201DD Handleiding

21 December 2024

Electrolux EWD8462OBI Handleiding

20 December 2024

Svan SL6001DD Handleiding

20 December 2024