Hotpoint-Ariston LFFA+ 8M14 X IB Handleiding

Hotpoint-Ariston Vaatwasser LFFA+ 8M14 X IB

Lees hieronder de 📖 handleiding in het Nederlandse voor Hotpoint-Ariston LFFA+ 8M14 X IB (84 pagina's) in de categorie Vaatwasser. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/84

Operating instructions

Contents

Product Fiche, 2

Installation, 3-4

Positioning and levelling

Connecting the water and electricity supplies

Advice regarding the first wash cycle

Technical data

Ecodesign Regulation

Description of the appliance, 5

Overall view

Control panel

Loading the racks, 6

Lower rack

Cutlery basket

Upper rack

Start-up and use, 7-8

Starting the dishwasher

Measuring out the detergent

Wash options

Wash cycles, 9

Table of wash cycles

Rinse aid and refined salt, 10

Measuring out the rinse aid

Measuring out the refined salt

Care and maintenance, 11

Shutting off the water and electricity supplies

Cleaning the dishwasher

Preventing unpleasant odours

Cleaning the sprayer arms

Cleaning the water inlet filter

Cleaning the filters

Leaving the machine unused for extended periods

Precautions, advice and Assistance,12

General safety

Disposal

Saving energy and respecting the environment

Assistance

Troubleshooting, 13

English,1

DISHWASHER

LFFA+ 8M14

Español, 29

Português, 43 Türkçe, 57

Polski, 71

Français, 15

Product Fiche

Brand HOTPOINT/ARISTON

Model LFFA+ 8M14

Rated capacity in standard place settings (1) 14

Energy efciency class on a scale from A+++ (low consumption) to D (high consumption) A+

Energy consumption per year in kWh (2) 299.0

Energy consumption of the standard cleaning cycle in kWh 1.03

Power consumption of the off-mode in W 1.3

Power consumption of the left-on mode in W 3.0

Water consumption per year in litres (3) 3360.0

Drying efcacy class on a scale from G (low efcacy) to A (high efcacy) A

Programme time for standard cleaning cycle in minutes 175

The duration of the left-on mode in minutes 10

Noise in dB(A) Re 1pW 49

Built-in model NO

NOTES

1) The information on the label and che relates to the standard cleaning cycle, this programme is suitable to clean normally

soiled tableware and it is the most efcient programme in terms of combined energy and water consumption. The standard

cleaning cycle corresponds to the Eco cycle.

2) Based on 280 standard cleaning cycles using cold water ll and the consumption of the low power modes. Actual energy

consumption depends on how the appliance is used.

3) Based on 280 standard cleaning cycles. Actual water consumption depends on how the appliance is used.

Installation

Keep this instruction manual in a safe place for future

reference. If the appliance is sold, given away or moved, please

ensure the manual is kept with the machine, so that the new

owner may benefit from the advice contained within it.

Please read this instruction manual carefully: it contains

important information regarding the safe installation, use and

maintenance of the appliance.

If the appliance must be moved at any time, keep it in an

upright position; if absolutely necessary, it may be tilted onto its

back.

This appliance is intended to be used in household and

similar applications such as:

- staff kitchen areas in shops, offices and other working

environments;

- farm houses;

- by clients in hotels, motels and other residential type

environments;

- bed and breakfast type environments.

Positioning and levelling

1. Remove the appliance from all packaging and check that it

has not been damaged during transportation.

If it has been damaged, contact the retailer and do not proceed

any further with the installation process.

2. Check the dishwasher by placing it so that its sides or back

panel are in contact with the adjacent cabinets or even with

the wall. This appliance can also be recessed under a single

worktop*

(see the Assembly instruction sheet).

3. Position the dishwasher on a level and sturdy floor. If the

floor is uneven, the front feet of the appliance may be adjusted

until it reaches a horizontal position. If the appliance is levelled

correctly, it will be more stable and much less likely to move or

cause vibrations and noise while it is operating.

4*. Adjust the height of the rear foot from the front of the

appliance on the central lower part of the dishwasher, turning

a hexagonal spanner (red color) with an opening of 8 mm in a

clockwise direction to increase the height or in an anticlockwise

direction to decrease the height.

Connecting the water and electricity

supplies

Connection to the water and electricity supplies should only

be performed by a qualified technician.

The dishwasher should not stand on top of the water hoses

or the electricity supply cable.

The appliance must be connected to the water supply

network using new hoses.

Do not use old hoses.

The water inlet and outlet hoses and the electricity supply cable

may be positioned towards the right or the left in order to achieve

the best possible installation.

Connecting the water inlet hose

• Toasuitablecoldwaterconnectionpoint:beforeattaching

the hose, run the water until it is perfectly clear so that any

impurities that may be present in the water do not clog the

appliance; after performing this operation, screw the inlet

hose tightly onto a tap with a ¾ gas threaded connection.

• Toasuitablehotwaterconnectionpoint:yourdishwasher

may be supplied with hot water from the mains supply (if you

have a central heating system with radiators) provided that it

does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a

cold water supply.

If the inlet hose is not long enough, contact a specialist store

or an authorised technician

(see Assistance).

The water pressure must be within the values indicated in the

Technical data table

(see adjacent information).

The hose should not be bent or compressed.

Connecting the water outlet hose

Connect the outlet hose (without bending it) to a drain duct

with a minimum diameter of 4 cm.

The outlet hose must be at a height ranging from 40 to 80

cm from the floor / surface where the dishwasher rests (A).

Before connecting the water outlet hose to the sink drain,

remove the plastic plug (B).

Anti-flooding protection

To ensure floods do not occur, the dishwasher:

- is provided with a special system which blocks the water supply

in the event of anomalies or leaks from inside the appliance.

Some models are also equipped with the supplementary safety

device New Acqua Stop *, which guarantees anti-flooding

protection even in the event of a supply hose rupture.

WARNING: HAZARDOUS VOLTAGE!

Under no circumstance should the water inlet hose be cut as it

contains live electrical parts.

* Only available in selected models.

Product specificaties

Merk:	Hotpoint-Ariston
Categorie:	Vaatwasser
Model:	LFFA+ 8M14 X IB
Apparaatplaatsing:	Vrijstaand
Soort bediening:	Knoppen
Ingebouwd display:	Ja
Breedte:	600 mm
Diepte:	600 mm
Hoogte:	850 mm
Aantal couverts:	14 couverts
Droogsysteem:	Natuurlijk
Deurkleur:	Roestvrijstaal
Droogklasse:	A
Geluidsniveau:	49 dB
Jaarlijks energieverbruik:	227 kWu
Energie-efficiëntieklasse (oud):	A+
Waterconsumptie per cyclus:	12 l
Wasklasse:	A
Aantal wasprogramma's:	8
Kleur bedieningspaneel:	Roestvrijstaal
Zout indicator:	Ja
Glansmiddel indicator:	Ja
AquaStop-functie:	Ja
Afwasprogramma's:	Glass/delicate,Intensive,Normal
Energieverbruik per cyclus:	1.03 kWu
Jaarlijks waterverbruik:	2640 l
Bovenste mand verstelbare hoogte:	Ja