Hotpoint-Ariston LFF7 8H14 X Handleiding

Hotpoint-Ariston Vaatwasser LFF7 8H14 X

Lees hieronder de 📖 handleiding in het Nederlandse voor Hotpoint-Ariston LFF7 8H14 X (85 pagina's) in de categorie Vaatwasser. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/85
Operating instructions
Contents
Installation, 2-3
Positioning and levelling
Connecting the water and electricity supplies
Advice regarding the first wash cycle
Technical data
Transportation
Leaving the machine unused for extended
periods/Freezing protection
Description of the appliance, 4
Overall view
Control panel
Loading the racks, 5
Lower rack
Cutlery basket
Upper rack
Start-up and use, 6-7
Starting the dishwasher
Measuring out the detergent
Wash options
Wash cycles, 8
Table of wash cycles
Rinse aid and refined salt, 9
Measuring out the rinse aid
Measuring out the refined salt
Care and maintenance, 10
Shutting off the water and electricity supplies
Cleaning the dishwasher
Preventing unpleasant odours
Cleaning the sprayer arms
Cleaning the water inlet filter
Cleaning the filters
Precautions, advice and Assistance,11
General safety
Disposal
Saving energy and respecting the environment
Assistance
Troubleshooting, 12
English,1
EN
DISHWASHER
LFF7 8H14
Français, 13
FR
Nederlands,37
ES
PT
DE
Deutsch, 25
NL
Español, 49 Português, 61
TR
Türkçe, 73
EN
2
Installation
Keep this instruction manual in a safe place for future
reference. If the appliance is sold, given away or moved,
please ensure the manual is kept with the machine, so that the
new owner may benefit from the advice contained within it.
Please read this instruction manual carefully: it contains
important information regarding the safe installation, use and
maintenance of the appliance.
If the appliance must be moved at any time, keep it in an
upright position; if absolutely necessary, it may be tilted onto
its back.
This appliance is intended to be used in household and
similar applications such as:
- staff kitchen areas in shops, offices and other working
environments;
- farm houses;
- by clients in hotels, motels and other residential type
environments;
- bed and breakfast type environments.
Positioning and levelling
1. Remove the appliance from all packaging and check that it
has not been damaged during transportation.
If it has been damaged, contact the retailer and do not
proceed any further with the installation process.
2. Check the dishwasher by placing it so that its sides or back
panel are in contact with the adjacent cabinets or even with the
wall. This appliance can also be recessed under a single
worktop* (see the Assembly instruction sheet).
3. Position the dishwasher on a level and sturdy floor. If the
floor is uneven, the front feet of the appliance may be adjusted
until it reaches a horizontal position. If the appliance is levelled
correctly, it will be more stable and much less likely to move or
cause vibrations and noise while it is operating.
4*. Adjust the height of the rear foot from the front of the
appliance on the central lower part of the dishwasher, turning
a hexagonal spanner (red color) with an opening of 8 mm in a
clockwise direction to increase the height or in an
anticlockwise direction to decrease the height.
Connecting the water and electricity
supplies
Connection to the water and electricity supplies should
only be performed by a qualified technician.
The dishwasher should not stand on top of the water
hoses or the electricity supply cable.
The appliance must be connected to the water supply
network using new hoses.
Do not use old hoses.
The water inlet and outlet hoses and the electricity supply
cable may be positioned towards the right or the left in order
to achieve the best possible installation.
Connecting the water inlet hose
 To a suitable cold water connection point: before attaching
the hose, run the water until it is perfectly clear so that any
impurities that may be present in the water do not clog the
appliance; after performing this operation, screw the inlet
hose tightly onto a tap with a ¾ gas threaded connection.
 To a suitable hot water connection point: your dishwasher
may be supplied with hot water from the mains supply (if
you have a central heating system with radiators) provided
that it does not exceed a temperature of 60°C.
Screw the hose to the tap as described for connection to a
cold water supply.
If the inlet hose is not long enough, contact a specialist
store or an authorised technician (see Assistance).
The water pressure must be within the values indicated in
the Technical data table (see adjacent information).
The hose should not be bent or compressed.
Connecting the water outlet hose
Connect the outlet hose (without bending it) to a drain
duct with a minimum diameter of 4 cm.
The outlet hose must be at a height ranging from 40 to
80 cm from the floor / surface where the dishwasher
rests (A).
Before connecting the water outlet hose to the sink
drain, remove the plastic plug (B).
Anti-flooding protection
To ensure floods do not occur, the dishwasher:
- is provided with a special system which blocks the water
supply in the event of anomalies or leaks from inside the
appliance.
Some models are also equipped with the supplementary
safety device New Acqua Stop*, which guarantees anti-
flooding protection even in the event of a supply hose rupture.
WARNING: HAZARDOUS VOLTAGE!
Under no circumstance should the water inlet hose be cut as it
contains live electrical parts.
* Only available in selected models.
EN
3
Electrical connection
Before inserting the plug into the electrical socket, make sure
that:
 The socket is earthed and complies with current
regulations.
 The socket can withstand the maximum load of the
appliance, which is indicated on the data plate located on
the inside of the door (see chapter entitled Description of
the appliance).
 The power supply voltage falls within the values indicated
on the data plate on the inside of the door.
 The socket is compatible with the plug of the appliance. If
this is not the case, ask an authorised technician to replace
the plug (see Assistance); do not use extension cables or
multiple sockets.
Once the appliance has been installed, the power supply
cable and the electrical socket should be easily accessible.
The cable should not be bent or compressed.
If the power supply cable is damaged, it must be replaced
by the manufacturer or its Technical Assistance Service in order
to prevent all potential hazards. (See Assistance)
The Company shall not be held responsible for any
incidents that occur if these regulations are not observed.
* Only available in selected models.
Anti-condensation strip*
After installing the dishwasher, open the door and stick the
adhesive transparent strip under the wooden shelf in order to
protect it from any condensation which may form.
Advice regarding the first wash cycle
After the appliance has been installed, immediately before
running the first wash cycle, completely fill the salt dispenser
with water and add only then approximately 1 kg of salt (see
chapter entitled Rinse aid and refined salt). The water may
overflow: this is normal and is not a cause for concern. Select
the water hardness value (see chapter entitled Rinse aid and
refined salt). - After the salt has been poured into the
machine, the LOW SALT indicator light* switches off.
If the salt container is not filled, the water softener and the
heating element may be damaged as a result.
Transportation
Unload all crockery from the dishwasher and secure moving
parts.
All water remaining inside the appliance should be
drained as follows:
make sure that the water tap is open and select the ECO
cycle. The cycle will begin. After 5 minutes, end the cycle by
pressing the ON/OFF button until you hear a beep and the
indicator lights switch off. Wait for approximately 5 minutes
before uninstalling the appliance. Shut off the tap and
disconnect the inlet and drain hose.
The appliance should only be moved in an upright position,
in order to prevent any water remaining inside the appliance
from damaging dishwasher components.
Leaving the machine unused for extended
periods/Freezing protection
If the appliance is situated in a location which is at risk of
freezing, or if you intend to be away for extended periods of
time (e.g. holiday home), empty the appliance completely.
- Carry out the process used to drain all water remaining
inside the appliance (see Transportation)
- Disconnect the appliance from the electricity supply and
shut off the water tap.
- Leave the appliance door ajar.
- When you return, run a cycle while the dishwasher is
empty.
Technical data
Dimensions
width 60 cm
height 85 cm
depth 60 cm
Capacity 14 standard place-settings
Water supply
pressure
0,05 ÷ 1MPa (0.5 ÷ 10 bar)
7,25 – 145 psi
Power supply
voltage See appliance data plate
Total absorbed
power See appliance data plate
Fuse See appliance data plate
This dishwasher conforms to the
following European Community
Directives:
-2006/95/EC (Low Voltage)
-2004/108/EC (Electromagnetic
Compatibility)
-2005/32/EC (Comm. Reg.
1275/2008) (Ecodesign)
-97/17/EC (Labelling)
-2002/96/EC Waste Electrical
and Electronic Equipment
(WEEE)

Product specificaties

Merk: Hotpoint-Ariston
Categorie: Vaatwasser
Model: LFF7 8H14 X

Heb je hulp nodig?

Als je hulp nodig hebt met Hotpoint-Ariston LFF7 8H14 X stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Vaatwasser Hotpoint-Ariston

Hotpoint-Ariston

Hotpoint-Ariston LFF7 8H14 EU Handleiding

21 Juni 2023
Hotpoint-Ariston

Hotpoint-Ariston LV 625 WH Handleiding

20 Juni 2023
Hotpoint-Ariston

Hotpoint-Ariston LFSA+ 2174 A WH Handleiding

8 Juni 2023
Hotpoint-Ariston

Hotpoint-Ariston LSP 720A B Handleiding

1 Juni 2023
Hotpoint-Ariston

Hotpoint-Ariston LFTA+ M294 A Handleiding

31 Mei 2023
Hotpoint-Ariston

Hotpoint-Ariston HFC 3C41 CW X Handleiding

23 Mei 2023
Hotpoint-Ariston

Hotpoint-Ariston LFF 8M121 CX DE/SK Handleiding

22 Mei 2023
Hotpoint-Ariston

Hotpoint-Ariston LLD 8M121 Handleiding

21 Mei 2023
Hotpoint-Ariston

Hotpoint-Ariston HSIC 2B27 FE Handleiding

21 Mei 2023
Hotpoint-Ariston

Hotpoint-Ariston LTF 11H121 EU Handleiding

21 Mei 2023

Handleiding Vaatwasser

Nieuwste handleidingen voor Vaatwasser

Hanseatic

Hanseatic HG6085C13J7609DS Handleiding

3 December 2024
Whirlpool

Whirlpool WIP 4T233 PFEG Handleiding

3 December 2024
Whirlpool

Whirlpool WFO 3T233 P 6.5 X Handleiding

3 December 2024
Whirlpool

Whirlpool W2F HKD624 X Handleiding

3 December 2024
Whirlpool

Whirlpool W8I HT40 T Handleiding

3 December 2024
Whirlpool

Whirlpool WKIC3C26 Handleiding

3 December 2024
Whirlpool

Whirlpool W2I HD524 AS Handleiding

3 December 2024
Whirlpool

Whirlpool W7FHS41 Handleiding

3 December 2024
Whirlpool

Whirlpool WSIC3M17 Handleiding

3 December 2024
Whirlpool

Whirlpool W7I HF60 TUS Handleiding

3 December 2024