Hoover HVH 551/1 X Handleiding

Hoover Fornuis HVH 551/1 X

Lees hieronder de 📖 handleiding in het Nederlandse voor Hoover HVH 551/1 X (42 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/42
IT
ISTRUZIONI D’USO E INSTALLAZIONE
PIANI VETROCERAMICA
INSTALLATIONS- UND BEDIENUNGSANLEITUNG
CERANFELDER DE
ES
INSTRUCTIONS FOR USE AND INSTALLATION
CERAMIC HOBS GB
MANUAL DE UTILIZA INSTALLAÇÃOÇÃO E DE
PLACAS VITROCERÂMICAS PT
INSTALLATIE- EN GEBRUIKSINDTRUCTIES
VITROKERAMISCHE KOOKVLAKKEN NL
DA
FIN
KÄYTTÖ- JA ASENNUSOHJEET
KERAAMISET LIEDET
HOOVER - Via Privata Eden Fumagalli - 20047 Brugherio (Milano) - Italy
BRUGS- OG INSTALLATIONSVEJLEDNING
KERAMISKE PLADER
1 GB
READ THE INSTRUCTIONS BOOKLET CAREFULLY TO MAKE THE MOST OF YOUR HOB.
We recommend you keep the instructions for installation and use for later reference, and before installing the hob, note its serial number
below in case you need to get help from the after sales service.
We are constantly striving to improve product quality and as such may modify appliances to incorporate the latest technical improvements.
Glass Ceramic Hobs conform to directives 73/23/CEE and 89/336/CEE.
Made in FRANCE - 232 -
220 - 240 V
P. Motors = 30 W
Mod : FE GD21 RB
P. Maxi (Oven) - 2350 W
Code: 39354774 -0306 0511
Mod: FE GD21 RB
Code: 39354774 - 0306 0511
220 - 240 V
Code: 39354774
- 0306 0511
Code: 39354774
- 0306 0511
Code: 39354774
- 0306 0511
Identification plate
(located under the hob's bottom casing)
• It is strongly recommended to keep children away from the cooking zones while they are in operation or when they are switched off,
so long as the residual heat indicator is on, in order to prevent the risks of serious burns.
• When cooking with fats or oils, take care always to watch the cooking process as heated fats and oils can catch fire rapidly.
• The hob’s control area is sensitive, do not place hot containers on it.
• Aluminium foil and plastic pans must not be placed on heating zones.
• After every use, some cleaning of the hob is necessary to prevent the build up of dirt and grease. If left, this is recooked when the
hob is used and burns giving off smoke and unpleasant smells, not to mention the risks of fire propagation.
• It is advisable not to stare directly at the halogen elements.
• Do not touch the heat zones during operation or for a while after use.
• Never cook food directly on the glass ceramic hob. Always use the appropriate cookware.
• Always place the pan in the centre of the unit that you are cooking on.
• Do not use the surface as a cutting board.
• Do not slide cookware across the hob.
• Do not store heavy items above the hob. If they drop onto the hob, they may cause damage.
• Do not use the hob as a working surface.
• Do not use the hob for storage of any items.
• In the unlikely event of a surface crack appearing, do not use the hob. Immediately disconnect the hob from the electrical power supply
and call the After Sales Service.
GENERAL WARNINGS
HVHCOOKING HOB
4 Hilight
220-240/50
7100
B 595x510
X 570x500
560x490
4 Hilight
220-240/50
7600
B 775x510
X 750x500
560x490
Burners
Supply voltage (V/Hz)
Installed electric power (W)
Product size (l x p) mm.
Building-in dimensions (AxB)
A power cord is not supplied with the appliance, but the hob is
equipped with a terminal block which enables you to choose the
correct connection for the particular power supply.
Installing a domestic appliance can be a complicated operation which if not carried out correctly, can seriously affect consumer
safety. It is for this reason that the task should be undertaken by a professionally qualified person who will carry it out in
accordance with the technical regulations in force. In the event that this advice is ignored and the installation is carried out
by an unqualified person, the manufacturer declines all responsibility for any technical failure of the product whether or not
it results in damage to goods or injury to individuals.
2 GB
BUILT-IN
The furniture in which your hob will be installed and all adjacent
furniture, should be made from materials that can withstand high
temperatures. In addition, all decorative laminates should be fixed
with heat-resistant glue.
Installation:
• A watertight seal is supplied with the hob.
Before fitting:
- turn the hob upside down, with the glass surface facing downwards.
Make sure the glass is protected.
- fit the seal round the hob.
- make sure that it is correctly fitted to avoid any leakage into the
supporting cabinet.
• Leave a gap of at least 5 cm between the appliance and the
vertical sides of the adjacent furniture.
• If, when installing the hob, the lower hob face is adjacent to an
area normally accessible when handling or cleaning, fit a partition
1 cm below the base of the hob to avoid any risk of scorching
or damage.
INSTALLATION
"The installation must conform to the standard directives."
The manufacturer declines all responsibility for any damage that
may be caused by unsuitable or unreasonable use.
Warning :
• Always check before any electrical operation, the supply tension
shown on the electricity meter, the adjustment of the circuit-
breaker, the continuity of the connection to earth to the installation
and that the fuse is suitable.
• The electrical connection to the installation should be made via
a socket with a plug with earth, or via an omnipole cut-out switch
with an opening gap of at least 3 mm.
If the appliance has a socket outlet, it must be installed so that
the socket outlet is accessible.
• The yellow/green wire of the power supply cable must be
connected to the earth of both power supply and appliance
terminals.
• The manufacturer cannot be held responsible for any accidents
resulting from the use of an appliance which is not connected
to earth, or with a faulty earth connection continuity.
• Any queries regarding the power supply cord should be referred
to After Sales Service or a qualified technician.
ELECTRICAL CONNECTION
min 10 mm
Sp da 25 a 45 mm
Accessible
space
Seal
Hob
min 70 cm
min 15 cm
min 5,5 cm
10 mm
mini
50 mm
Opening
500 X 50
Opening
500 X 10
It is forbidden
to fit the hob
above a non-
ventilated oven
To proceed with the connection, you must adhere to the following
instructions.
• Before making the connection, make sure that the installation
is protected by a suitable fuse, see table, and that it is fitted
with wires of a large enough section to supply the appliance
normally.
• Choose the supply cord in accordance with the recommendations
in the table.
• Turn the hob, with the glass side against the worktop, providing
you have protected the glass !
CONNECTION TO THE TERMINALS ON THE TERMINAL BLOCK:
ELECTRICAL CONNECTION
3 G 2,5 mm2
H05RR-F,
H05VV-F,
H05V2V2-F
3 G 2,5 mm2
H05RR-F,
H05VV-F,
H05V2V2-F
4 G 2,5 mm2
H05RR-F,
H05VV-F,
H05V2V2-F
4 G 2,5 mm2
H05RR-F,
H05VV-F,
H05V2V2-F
5 G 1,5 mm2
H05RR-F,
H05VV-F,
H05V2V2-F
Monophase
220-240V~
Two phases
220-240V2~
Two phases
220-415V2N~
Three phases
220-240V3~
Three phases
380-415V3N~
25 A 25 A 25 A 25 A 16 AFUSE
CABLE
AREA
TYPE
2 Phase
shunt 1-2
shunt 2-3
5 Neutral
shunt 4-5
T Earth
CONNEC-
TION TO
THE
TERMIMAL
BLOCK
2 Phase
shun 1-2
shunt 2-3
5 Phase
shunt 4-5
T Earth
1 Phase
3 Phase
shunt 2-3
5 Neutral
shunt 4-5
T Earth
1 Phase
shunt 1-2
3 Phase
shunt 3-4
5 Phase
T Earth
1 Phase
2 Phase
3 Phase
5 Neutral
shunt 4-5
T Earth
• Open the cover in the following
sequence:
• find the two tabs located on the
sides,
• put the blade of a flat screw-
driver in front of each tab, push
in and press,
• remove the cover.
• Connect the power supply cable:
• comply with the information of the table and the markings
on the terminal board and install the shunts (the shunts, inserted
in the terminal board, make a bridge between two terminals),
• strip the end of each
conductor and attach
them to the terminals,
complying with the infor-
mation given in the table,
• unscrew the cable clamp,
• pass the lead through the
cable clamp.
When you have finished
the connection operation
to the appliance terminals,
tighten the cable clamp and
close the cover.
Note: make sure the terminal board screws are tight.
SHUNT
L2
L3

Product specificaties

Merk: Hoover
Categorie: Fornuis
Model: HVH 551/1 X

Heb je hulp nodig?

Als je hulp nodig hebt met Hoover HVH 551/1 X stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Fornuis Hoover

Hoover

Hoover HHK64C Handleiding

25 Oktober 2024
Hoover

Hoover HV-C60CI1 Handleiding

25 September 2024
Hoover

Hoover HV-C90CG Handleiding

25 September 2024
Hoover

Hoover HV-C60CI Handleiding

25 September 2024
Hoover

Hoover HV-C60CC Handleiding

25 September 2024
Hoover

Hoover HV-C60CG Handleiding

25 September 2024
Hoover

Hoover HGG95LPGEEGY2 Handleiding

30 Juli 2024
Hoover

Hoover HF7 Handleiding

30 Juli 2024
Hoover

Hoover HHG9WL38WC3X LPG Handleiding

30 Juli 2024
Hoover

Hoover HCM6501PX Handleiding

30 Juli 2024

Handleiding Fornuis

Nieuwste handleidingen voor Fornuis

Balay

Balay 3EB963FR Handleiding

21 November 2024
Miele

Miele CS 1011-1 G Handleiding

21 November 2024
Miele

Miele CS 1322 BG Handleiding

21 November 2024
Miele

Miele KM 3054 Handleiding

21 November 2024
Miele

Miele KM 6310 Handleiding

21 November 2024
Miele

Miele KM 3034 Handleiding

21 November 2024
Miele

Miele KM2335 Handleiding

21 November 2024
Smeg

Smeg SR764BS Handleiding

21 November 2024
Panasonic

Panasonic KY-W648CLJPQ Handleiding

21 November 2024
Panasonic

Panasonic KY-R64ARLJPQ Handleiding

21 November 2024