Honeywell QuietClean HFD230B Handleiding

Honeywell Luchtreiniger QuietClean HFD230B

Lees hieronder de 📖 handleiding in het Nederlandse voor Honeywell QuietClean HFD230B (14 pagina's) in de categorie Luchtreiniger. Deze handleiding was nuttig voor 69 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE
SAFETY INSTRUCTIONS
BEFORE USING THIS AIR
PURIFIER
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Read all instructions before operating the
air purifier.
2. Place air purifier where it is not easily knocked
over by persons in the household.
3. Always turn the air purifier controls to the
OFF position and unplug from the wall outlet
when not in use.
4. To disconnect the air purifier, press the
Power button to turn the unit off, grip the
plug and pull it from the wall outlet. Never
pull by the cord.
5. Do not use any product with a damaged cord or
plug or if product malfunctions, is dropped or
damaged in any manner. Keep the cord away
from heated surfaces.
6. Do not use air purifier outdoors.
7. Never use air purifier unless it is fully
assembled.
8. Do not run power cord under carpets, and do
not cover with throw rugs. Arrange cord such
that it will not be tripped over.
QUIETCLEAN®
OSCILLATING TOWER
AIR PURIFIER
Model Series HFD230
Honeywell is a trademark of Honeywell International Inc., used under license by Helen of Troy Limited.
Honeywell International Inc. makes no representation or warranties with respect to this product.
9. Do not use air cleaner where combustible
gases or vapors are present.
10. Do not expose the air purifier to rain, or use
near water, in a bathroom, laundry area or
other damp location.
11. The air purifier must be used in its upright
position.
12. Do not allow foreign objects to enter ventilation
or exhaust opening as this may cause electric
shock or damage to the air purifier. Do not
block air outlets or intakes.
13. Locate air purifier near the outlet and avoid
using an extension cord.
14. This appliance has a polarized plug (one blade
is wider than the other). To reduce the risk of
shock, this plug is intended to fit only one way
in a polarized outlet. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician.
DO NOT attempt to defeat this safety feature.
15. A loose fit between the AC outlet (receptacle)
and plug may cause overheating and a
distortion of the plug. Contact a qualified
electrician to replace loose or worn outlet.
16. Do not sit, stand or place heavy objects on the
air purifier.
17. Disconnect power supply before servicing.
Note: For FCC compliance information, please
see last page of this manual.
WARNING: To Reduce The Risk of Fire or
Electric Shock, Do Not Use This Air Purifier
With Any Solid-State Speed Control Device.
Owner’s Manual
2
YOUR AIR PURIFIER
HOW YOUR AIR PURIFIER WORKS
ENHANCED ODOR REDUCTION
This model air cleaner incorporates a 3-stage
cleaning system to clean the air that passes
through the filters in the unit (Fig. 1).
Stage 1: Washable or Odor-Reducing Pre-filter (your
choice) attaches to the rear grille. Captures
larger airborne particles and traps odors and
VOCs (when used with Optional Kpre-filter).
Stage 2: Permanent Washable ifD® Filter.
Captures microscopic airborne particles.
Stage 3: Electronic Ionizer boosts the cleaning power.
Washable or
Odor Reducing
Pre-Filter
Fig. 1
SET-UP
Optional Odor
Reducing
Pre-filter K
(packed in plastic bag)
(air intake is at the
rear of the grille and
output is from the
front of grille)
Permanant
Washable
ifD®
Filters
(2)
Rear
Grille
installed
Washable
Pre-filter
(1)
Control Panel
with Integrated
Carry Handle
The washable pre-filter came installed in your air purifier and removes larger particles from the air that
passes through the filter. You may use this washable pre-filter, or you have the choice to use the Optional
Odor & VOC Reducing KPre-filter that is packed in a bag that came with the air purifier. In addition to
capturing larger particles, the KPre-filter will also trap common household odors and gases. If you choose
to use the KPre-filter, you must remove the installed washable pre-filter then insert theKPre-filter.
Note: the KPre-filter cannot be washed and should be replaced every 3 months for optimum performance.
NOTE: Please only use pre-filter in your air cleaner at a time. You will need to choose whether you one
want to use the permanent washable pre-filter or the replaceable.
4
CLEANING THE IFD® FILTERS
The ifD® filter should be cleaned approximately every 3 months.
Turn the power off and unplug the air purifier.
After removing the ifD® filter from the air purifier,
follow the steps below to clean the ifD® filter.
Rinse the filter with clean tap water (Fig. 7)
If the filter still appears dirty, proceed to “Washing,”otherwise
proceed to " "Drying.
Washing:
• Remove the ifD® filters from the unit.
• Fill a sink with lukewarm water and add a few drops of mild dish soap.
• Gently swish the filters in the soap solution to clean.
• Soak the filters for 2-3 minutes. Do not leave for an extended period of time.
• Rinse the filters with clean tap water (Fig. 7) and proceed to " "Drying.
Fig.7
REMOVING THE FILTERS
CAUTION: Turn off the air cleaner and wait 60 seconds before removing the grille
to clean filters.
The ifD® filter is supplied within the air cleaner.
• Turn-off the air cleaner. Wait 60 seconds and unplug the unit before removing the grille.
• Press down on the tab on the rear grille, and pull the grille down and toward you.
Remove the grille (Fig. 6).
• With one hand, hold the air purifier steady and use other hand to grasp ifD
® filter and
pull out. Repeat for second filter.
• To place the ifD® filter back into the air cleaner housing, insert at bottom and ensure it
is pushed in as far as it can go, then push in from the top. Repeat with second filter.
Fig. 6
ELECTRONIC FILTER CLEAN REMINDER
Check Filters Button – When it is time to check and clean the filters, an indicator
light will illuminate. When this light comes on, you will need to clean the primary
ifD® filter and clean or replace the pre-filter. (See Filter Cleaning instructions on
pages 4-5). It is recommended that you periodically check the filters.
Depending on operating conditions, the filters should be cleaned every 3 months.
If you have chosen to use the Odor & VOC Reducing
K
Pre-filter, it is washable not
and should be replaced after 3 months. After you have cleaned or replaced the
filters, you will need to RESET the Electronic Filter Check.
To RESET the Electronic Filter Check:
After the ifD® filters and pre-filter have been cleaned/replaced and re-installed in the unit, plug the unit
into the power outlet with the unit remaining in POWER OFF mode, press and hold the CHECK FILTERS
button (see Fig. 5) for 3 seconds. The CHECK FILTERS LED will flash twice indicating the filter check
has been reset. The LED will no longer be illuminated.
The intervals are intended as guidelines only. Performance of any filter media is dependent upon the
concentration of contaminants contaminants going through the system. High concentrations of such as
dust, pet dander and smoke particles will reduce the useful performance of the filter and they may need
to be cleaned more frequently.
CLEANING THE IFD FILTERS (Cont)
Fig. 5


Product specificaties

Merk: Honeywell
Categorie: Luchtreiniger
Model: QuietClean HFD230B

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell QuietClean HFD230B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Luchtreiniger Honeywell

Handleiding Luchtreiniger

Nieuwste handleidingen voor Luchtreiniger