Honeywell HZ-823FE Handleiding

Honeywell Kachel HZ-823FE

Lees hieronder de 📖 handleiding in het Nederlandse voor Honeywell HZ-823FE (53 pagina's) in de categorie Kachel. Deze handleiding was nuttig voor 209 personen en werd door 1 gebruikers gemiddeld met 4.0 sterren beoordeeld

Download PDF

Pagina 1/53

SVE

FIN

NOR

DNK

HZ-823FE

HZ-824FE

HZ-820E

HZ-821E

HZ-822E

HZ-825TE

HZ-826FTE

CONVECTOR

USER INSTRUCTIONS

KONVEKTOR

GEBRAUCHSANWEISUNG

CONVECTEUR

MANUEL D’UTILISATION

CONVECTOR

BEDIENINGSHANDLEIDING

CONVECTOR

MANUAL DEL PROPIETARIO

CONVECTOR

MANUEL DO UTILIZADOR

CONVETTORE

MANUALE D'USO

CONVECTOR

BRUKSANVISNING

KONVEKTOR

BRUKSANVISNING

KONVEKTOR

BRUGGERHÅNDBOG

CONVECTOR

KÄYTTÖOHJEET

θερμαντικ σωμα (καλοριφερ)

√¢∏°π∂™ Ãƒ∏™∏™

KONVEKTÖR

KULLANICI TAL‹MATLARI

KОНВЕКТОР

àçëíêìäñàà èé ùäëèãìÄíÄñàà

OGRZEWACZ

INSTRUKCJA OBS¸UGI

KONVEKTOR

NÁVOD K POUÎITÍ

KONVEKTOR

HASZNÁLATI UTASÍTÁS

ΩGóîà°S’G äÉª«∏©J

FIG. 2FIG. 1

FIG. 4FIG. 3

FIG. 6FIG. 5

FIG. 8FIG. 7

ENGLISH

IMPORTANT SAFETY

INSTRUCTIONS

Read all instructions before using heater.

1. Connect the appliance only to single

phase AC of the voltage specified on the

rating plate.

2. This appliance complies with EMC direc-

tive 89/336/EEC regarding radio and

television interference.

3. Keep combustible materials such as furni-

ture, pillows, bedding, papers, clothes

and curtains at least 90 cm from the

heater.

4. Extreme caution is necessary when any

heater is used by or near children.

5. Always unplug the heater when not in

use. Do not pull on the cord when discon-

necting it.

6. Do not cover. If covered,there is a fire risk.

7. DO NOT use this heater in the immediate

surroundings of a bath, a shower or a

swimming pool.

8. This heater must not be located immedi-

ately below an electrical socket-outlet.

9. If the supply cord of this appliance is

damaged it must be replaced by a repair

shop appointed by the manufacturer, be-

cause special purpose tools are required.

10.Keep this heater clean. DO NOT allow

objects to enter any ventilation or exhaust

opening as this may cause electric shock,

or fire, or damage the heater.

11.Do not operate the unit before it is com-

pletely assembled according to the assem-

bly instructions.

ASSEMBLY INSTRUCTIONS

• This heater may be used with feet on the

floor or attached directly to the wall.

• For floor use, attach the feet to the lower

part of the heater by snapping each foot in-

to the matching holes (fig. 1).

• Firmly press each foot until a “click” is

heard. Place the heater on a firm, level,

open surface at least 90 cm away from any

other object. DO NOT use on an unstable

surface such as bedding or deep carpeting.

• For wall mounting, secure the wall attach-

ment clips into the wall with the screws pro-

vided. DO NOT install this heater in the im-

mediate surroundings of a bath, a shower

or swimming pool.

• Attach the wall spacers on the back of the

heater to keep the minimum distance to the

wall. Attach the heater to the mounting

clips, using the mounting holes on the back

of the heater (fig.2).

OPERATION INSTRUCTIONS

A) MODEL HZ-820E

• Turn the thermostat anticlockwise to its low-

est setting (d).

• Plug in the heater.

• Turn the thermostat clockwise to the highest

temperature setting, for a rapid warming

(fig.3).

• When the room reaches a comfortable tem-

perature, turn the thermostat anti clockwise

until the heater switches off. At this setting,

the thermostat will automatically turn the

heater on (the pilot light illuminates) and off

(the pilot light goes out) to maintain the se-

lected temperature.

• To turn the heater off, turn the thermostat an-

ti clockwise to the lowest setting (d) and un-

plug the heater.

B) MODELS HZ-821E, HZ-822E,

HZ-825TE

• Turn the switch to (0).

• Plug the heater into an outlet.

• Turn the switch to the desired power, (I-Low,

II-Medium, III-High) (fig. 4).

• Turn the thermostat clockwise to its highest

setting for a rapid warming.

• When the room reaches a comfortable tem-

perature, turn the thermostat anticlockwise

until the heater switches off. At this setting,

the thermostat will automatically turn the

heater on (the pilot light illuminates) and off

(the pilot light goes out) to maintain the se-

lected temperature.

• To turn the heater off, turn the switch to the

(0) position and unplug it.

C) TURBO

MODELS HZ-823FE, HZ-824FE

AND HZ-826FTE ONLY.

• Turn the switch to (0).

• Plug the heater into an outlet.

Product specificaties

Merk:	Honeywell
Categorie:	Kachel
Model:	HZ-823FE
Kleur van het product:	Grey, White
Gewicht:	6500 g
Indicatielampje:	Ja
Instelbare thermostaat:	Ja
Oververhittingsbeveiliging:	Ja
Ophangsysteem voor aan de muur:	Ja
Afmetingen (B x D x H):	180 x 780 x 490 mm
AC-ingangsspanning:	230 V
AC-ingangsfrequentie:	50 Hz
Geschikt voor ruimtevolume tot:	24 m³
Verwarmingsvermogen:	2000 W
Verwarming power (min):	1250 W