Honeywell HY254E4 Handleiding

Honeywell Ventilator HY254E4

Lees hieronder de 📖 handleiding in het Nederlandse voor Honeywell HY254E4 (21 pagina's) in de categorie Ventilator. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/21

IMPORTANT SAFETY

INSTRUCTIONS

READ AND SAVE THESE SAFETY

INSTRUCTIONS BEFORE USING

THIS FAN

When using electrical appliances,

basic precautions should always

be followed to reduce the risk of

fire, electric shock, and injury to

persons, including the following:

FOR US MODELS ONLY – This product

employs overload protection (fuse). A blown

fuse indicates an overload or short-circuit

situation. If the fuse blows, unplug the product

from the outlet. Replace the fuse as per the

user servicing instructions (follow product

marking for proper fuse rating) and check

the product. If the replacement fuse blows,

a short-circuit may be present and the

product should be discarded or returned to an

authorized service facility for examination and/

or repair.

1. Use this fan only as described in this

manual. Other use not recommended as

it may cause fire, electric shock or injury

to persons.

2. This product is intended for household

use ONLY and not for commercial,

industrial or outdoor use.

3. To protect against electric shock, do not

place fan in window, immerse unit, plug

or cord in water or spray with liquids.

4. This appliance has a polarized plug

(one blade is wider than the other). To

reduce the risk of shock, this plug is

intended to fit only one way in a polarized

outlet. If the plug does not fit fully in the

outlet, reverse the plug. If it still does

not fit, contact a qualified electrician.

DO NOT attempt to defeat this safety

feature.

5. Close supervision is necessary when any

appliance is used by or near children.

6. Turn the fan and unplug the fan from OFF

the outlet when not in use, when moving

the fan from one location to another and

before cleaning.

7. To disconnect the fan, first turn the unit

OFF, grip the plug and pull it from the wall

outlet. Never pull the plug by the cord.

8. Do not operate the fan in the presence of

explosive and/or flammable fumes.

9. Do not place the fan or any parts near

an open flame, cooking or other heating

appliance.

10. Do not operate the fan with a

damaged cord or plug or if the product

malfunctions, is dropped

or damaged in any manner

(see warranty).

11. Avoid contact with moving fan parts.

12. The use of attachments not

recommended by the manufacturer may

be hazardous.

13. Place the fan on a dry level surface.

14. Do not hang or mount fan on a wall

or ceiling.

15. Do not operate if the fan housing is

damaged.

QUIETSET®

WHOLE ROOM TOWER FAN

HY-254 Series

HY-280 Series

Owner’s Manual

The Honeywell Trademark is used by Kaz USA, Inc. under license from Honeywell International Inc.

Honeywell International Inc. makes no representation or warranties with respect to this product.

16. A loose fit between the AC outlet

(receptacle) and plug may cause

overheating and a distortion of the plug.

Contact a qualified electrician to replace

loose or worn outlet.

17. Do not operate any fan with a damaged

cord or plug. Discard any damaged fan,

return the fan to the retailer where the

fan was purchased, or request a return

authorization to return to Kaz USA, Inc. for

examination and/or repair.

18. Do not run fan cord under carpeting. Do

not cover cord with throw rugs, runners,

or similar coverings. Do not route cord

under furniture or appliances. Arrange

cord away from traffic areas and where it

will not be tripped over.

WARNING: To Reduce The Risk of Fire or

Electric Shock, Do Not Use This Fan With

Any Solid-State Speed Control Device,

other than the one supplied.

USER SERVICING INSTRUCTIONS

• Grasp plug and remove from the receptacle or other outlet device.

Do not unplug by pulling on cord.

• If your fan loses power and you suspect that the fuse on your fan

has blown, you should first remove the spare fuse holder attached

to the cord plug (Fig. 1). Remove the spare fuse from the plastic

spare fuse holder, and set the spare fuse aside (Fig. 2).

• You can gain access to the blown fuse by sliding open the door

found on the side of the plug. Slide the door outward until the

blown fuse is fully visible (Fig. 3).

• Carefully remove the blown fuse and snap the replacement fuse

into place. Risk of fire. Replace fuse only with 2.5 Amp, 125 volt

fuse (provided with product). Fully close the fuse door by sliding

back into place. Discard the blown fuse. The plug should now be

ready for normal use.

• Risk of fire. Do not replace attached plug. Contains a safety device

(fuse) that should not be removed. Discard product if the attached

plug is damaged.

• If you need further information on how or when to replace the

fuse in the safety plug, please contact Kaz Consumer Relations

Department by visiting our website at www.kaz.com or calling

1-800-477-0457.

Thank you for your purchase.

This fan features a fused safety plug which is designed to cut off electric current to the fan if an

electrical fault occurs. Please see below for more information on how to properly use your fan and

replace the safety plug fuse, if needed.

FUSED SAFETY PLUG - FOR US ONLY

Fig. 1

Fig. 2

Fig. 3

On/Off

To turn fan on, press the Power button ( )

located on the left side of the control panel.

Current room temperature will be displayed

whenever fan is on.

Speed Control

The fan will automatically start on “Sleep” speed

when initially turned on. To adjust

the speed up or down, press the Fan Speed

button ( ) repeatedly to increase level.

Oscillation

To activate the Oscillation feature, press the

Oscillation button ( ) once.

Press the again to turn the Oscillation button

Oscillation feature off.

Timer

Choose from 1, 2, 4, or 8 hour settings by performing the following function:

• 1 hour: Press the (Timer button ) once.

• 2 hours: Press the twice.Timer button

• 4 hours: Press the a third time.Timer button

• 8 hours: Press the a fourth time.Timer button

Press the a fifth time to turn the Timer feature off. Timer button

HY-280 SERIES FAN OPERATION

On/Off

Press the (Power button ) once to turn the fan on. Press the

Power button a second time to turn the fan off.

Speed Control

The fan will automatically start on “Sleep” speed when initially

turned on. To adjust the speed up or down, press the Fan

Speed button () repeatedly to increase level

Oscillation

To activate the Oscillation feature, press the Oscillation button

( ) once.

Press the again to turn the Oscillation Oscillation button

feature off.

Remote Control Storage

When it is not in use, the remote control may be stored in the

recessed area located behind the controls (Fig. 10).

HY-254 SERIES REMOTE CONTROL OPERATION

Fig. 10

Model HY-280

Product specificaties

Merk:	Honeywell
Categorie:	Ventilator
Model:	HY254E4
Kleur van het product:	Zwart, zilver
Timer:	Ja
Gewicht:	3750 g
Breedte:	170 mm
Diepte:	174 mm
Hoogte:	800 mm
Geluidsniveau:	51 dB
Stroomvoorziening:	220-240V, 50Hz
Plaatsing:	Vloer
Luchtstroom:	285 m³/uur
Stroomverbruik (typisch):	35 W
Ventilator diameter:	- mm