Honeywell HPA600 series Handleiding

Honeywell Luchtreiniger HPA600 series

Lees hieronder de 📖 handleiding in het Nederlandse voor Honeywell HPA600 series (12 pagina's) in de categorie Luchtreiniger. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
IMPORTANT
SAFETY INSTRUCTIONS
READ AND SAVE THESE
SAFETY INSTRUCTIONS
BEFORE USING THIS
AIR PURIFIER
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Read all instructions before operating the air
purifier.
2. Place air purifier where it is not easily
knocked over by persons in the household.
3. ALWAYS turn the air purifier controls to the
OFFposition and unplug from the wall outlet
when not in use.
4. To disconnect the air purifier, make sure the
unit is powered OFF then grip the plug and
pull it from the wall outlet. NEVER pull by the
cord.
5. DO NOT use any product with a damaged
cord or plug or if product malfunctions, is
dropped or damaged in any manner. Keep
the cord away from heated surfaces.
6. DO NOT use air purifier outdoors.
7.
DO NOT
use air purifier unless it is fully
assembled.
8. DO NOT run power cord under carpets, and DO
NOT cover with throw rugs. Arrange cord such
that it will not be a tripping hazard.
9. DO NOT use air purifier where combustible
gases or vapors are present.
10. DO NOT expose the air purifier to rain, or use
near water, in a bathroom, laundry area or
other damp location.
11. The air purifier must be used in its upright
position.
12. DO NOT allow foreign objects to enter
ventilation or exhaust opening as this may
cause electric shock or damage to the air
purifier. DO NOT block air outlets or intakes.
13. Locate air purifier near the outlet and avoid
using an extension cord or power strip.
14. This appliance has a polarized plug (one
blade is wider than the other). To reduce
the risk of shock, this plug is intended to fit
only one way in a polarized outlet. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician.
DO NOTattempt to defeat this safety
feature.
15. A loose fit between the ACoutlet (receptacle)
and plug may cause overheating and a
distortion of the plug. Contact a qualified
electrician to replace loose or worn outlet.
16. DO NOT sit, stand or place heavy objects on
the air purifier.
17. Disconnect power supply before servicing.
18. SAVE THESE INSTRUCTIONS.
For FCC compliance information, please
see last page of this manual.
WARNING: To Reduce The Risk of Fire or
Electric Shock, Do Not Use This Air Purifier
With Any Solid-State Speed Control Device.
PROFESSIONAL SERIES™
TRUE HEPA
AIR PURIFIER
For Models: HPA600 series
Air Purifier
Heater
Fan
Filter
Humidifier
2 3
HPA600 series
Control Panel
Air Quality Monitor LED Display
Air Intake Grille
Casters
Air Outlet Grille
Particle/VOC
Sensor Door
Air Intake Grille
YOUR AIR PURIFIER 3-IN-1 HEPA FILTER
HOW YOUR AIR PURIFIER WORKS
The Honeywell Professional Series™ True HEPA Air Purifier
uses a powerful 4 Step Cleaning System to help purify the
air that passes through the filters in the unit (Fig. 1).
Step 1: Washable/Vacuumable Mesh Pre-filters
at Air Intake – these filters help to capture
larger airborne particles such as pet hair/
fur and dust before they reach the HEPA
filter. These filters should be removed
approximately every 3 months and washed
or vacuumed clean.
Step 2: HEPA Filters capture up to 99.97% of airborne particles as small as 0.1 micron1.
Step 3: Antimicrobial coating inhibits growth of bacteria on filters2.
Step 4: Granulated Activated Carbon Filter traps odors and VOCs.
SET-UP
Select a firm, level, and flat location. For best airflow, locate the unit at least 6 inches from any wall or furniture.
When operating, large volumes of air are drawn toward the air purifier. Surrounding areas should be cleaned
and/or vacuumed frequently to prevent build-up of dust and other contaminants. This may also help
prolong the life of the filters. If the unit is placed on a light-colored carpet, a small mat or rug should be used
underneath to prevent staining. This is especially important in homes with contamination from smoking,
fireplaces, or where candles are burned.
Granulated
Activated
Carbon Filter
HEPA Filter Antimicrobial Coating
Washable Mesh
Pre-filter at
Air Intake
Fig. 1
Rear Door
Mesh PreFilter
(one on each side)
3In1
HEPA Filter
(one on each side /
black side faces inward)
3In1 HEPA Filter
(one on each side /
black side faces inward)
HEPA Filter Side
(with antimicrobial coating)
Granulated Activated
Carbon Filter Side
1 From the air that passes through the filters.
2 Based on independent testing using AATCC1002012 test method measuring bacterial inhibition and bactericidal properties of fabrics and nonwovens.
4 5
FIRST TIME USE
There are two 3-in1 HEPA Filters supplied within your air purifier. These
filters provide three stages of cleaning performance: HEPA filter media that
helps capture up to 99.97% of airborne particles as small as 0.1 micron1,
antimicrobial coating that inhibits growth of bacteria on filters2, and activated
carbon granules help absorb odors and VOCs. The filters are wrapped to
ensure purity, and are labeled to help identify the proper replacement filter
(Type
Z
filters should be replaced 1x/year). Before using your new air
purifier, you must remove the wrappers covering the filters.
Make sure the air purifier is OFF and unplugged.
Open the rear door to remove the filters . Remove the HEPA filters from the
two sides of the unit (see Fig. 2).
Remove the filters from the plastic bags.
Install the filters into the unit with the red pull tabs facing outward
(this will facilitate filter removal later). The side of the filter with the carbon
granules (black side) and foam seal should be facing in to the purifier
housing (see Fig. 3).
Close the rear door and plug the unit into an outlet. You are now ready to
use your new Honeywell Professional Series™ True HEPA Air Purifier.
ENERGY STAR
®
This product earned the ENERGY STAR® by meeting strict energy efficiency guidelines set by the U.S.
EPA. The U.S. EPA does not endorse any manufacturer claims of healthier indoor air from the use of
this product.
The energy efficiency of this ENERGY STAR® qualified model is measured based on a ratio between the model’s
Clean Air Delivery Rate (CADR) for Dust and the electrical energy it consumes, or CADR/Watt.
OPERATING INSTRUCTIONS
Ensure the air purifier is plugged into a working electrical outlet. A chime will sound and the power light will
illuminate when plugged in.
Tap the power icon once. The unit will start at cleaning level 2 and remain on this setting until another
cleaning level is selected.
Tap the Cleaning Level icon to select a different cleaning level.
Portable air purifiers are more effective in rooms where all doors and windows are closed. It is recommended that
you run your air purifier while you are at home to help clean the air. If desired, or conditions warrant, you may run
your air purifier 24 hours a day.
Fig. 2
Fig. 3
CONTROLS
The Honeywell Professional
Series™ True HEPA Air Purifier
has easy-to-use controls to
help you manage your indoor
air quality. Each time you
select a setting you will hear
a chime indicating the setting
has been changed.
CLEANING LEVEL SELECTOR
This controls the air cleaning level of the unit. This Honeywell Professional Series™ Air Purifier has 4 cleaning
levels plus a Turbo setting for power cleaning. Each time you turn your air purifier on it will start at cleaning level 2
setting. TAP the icon to cycle through the cleaning levels to reach the desired setting.
Level 1 – Sleep
This setting is best for ultra-quiet operation, perfect for nighttime use when sleeping.
Level 2 – Germ
This setting slows down air movement so microscopic airborne germs are most effectively captured in
the filters. Germs, like certain bacteria and viruses, can be much smaller than other airborne particles or
organisms. Giving the germs more time to dwell in the filters increases the filtration efficiency. This setting
can be used during cold and flu season to help reduce certain germs from the air that passes through the
filters.
Level 3 – General Cleaning
Best for General Cleaning. Use this setting to help reduce airborne dust and smoke particles, like those
resulting from cooking or tobacco smoke. This setting is also very effective in reducing airborne pet dander.
Level 4 – Allergen
This setting makes the air purifier perform at the proper level for reducing many types of airborne allergens.
It ensures the allergen capturing efficiency and rate is best for the particle sizes being captured.
TURBO MODE
When Turbo Mode is selected the will illuminate. This setting operates the air purifier at the highest cleaning
level and maximizes its ability to help clean the air and help reduce odors and VOCs quickly.
AIR QUALITY INDICATOR
Your Honeywell Professional Series™
Air Purifier is equipped with Particle
and VOC Sensors that detect the levels
of particles and VOCs in the room and
provide a visual display to indicate air
quality. The Air Quality Indicator is an LED display located on the front of the air purifier below the Honeywell logo.
The particle and VOC sensors are constantly monitoring the air and the air quality indicator light will illuminate
blue, amber, or red depending on the level of VOCs and/or particles detected in the room.
Blue – Good air quality. There is a low level of VOCs and particles detected.
Amber – Medium air quality. There is a moderate level of VOCs or particles detected.
Red – Poor air quality. There is an elevated level of VOCs or particles detected.


Product specificaties

Merk: Honeywell
Categorie: Luchtreiniger
Model: HPA600 series

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell HPA600 series stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Luchtreiniger Honeywell

Handleiding Luchtreiniger

Nieuwste handleidingen voor Luchtreiniger