Honeywell HF-910 Turbo Force Handleiding

Honeywell Ventilator HF-910 Turbo Force

Lees hieronder de 📖 handleiding in het Nederlandse voor Honeywell HF-910 Turbo Force (20 pagina's) in de categorie Ventilator. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/20
Owner’s Manual
The Honeywell trademark is used by Kaz, Inc. under license from Honeywell International Inc.
Honeywell International Inc. makes no representation or warranties with respect to this product.
TURBO FORCE®/TECH FORCE
HIGH VELOCITY
CIRCULATORS
HT-800 Series, HT-900 Series, HT-900C
Series, HT-908 Series, HT-9004C and
HF-910 Series
IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE SAFETY
INSTRUCTIONS BEFORE USING
THIS FAN
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
FOR US MODELS ONLY - This product
employs overload protection (fuse). A
blown fuse indicates an overload or short-
circuit situation. If the fuse blows, unplug
the product from the outlet. Replace the
fuse as per the user servicing instructions
(follow product marking for proper fuse
rating) and check the product. If the
replacement fuse blows, a short-circuit
may be present and the product should
be discarded or returned to an authorized
service facility for examination and/or
repair.
1. Use this fan only as described in this
manual. Other use not recommended,
may cause fire, electric shock or injury to
persons.
2. This product is intended for household
use and not for commercial, ONLY
industrial or outdoor use.
3. To protect against electric shock, do not
place fan in window, immerse unit, plug
or cord in water or spray with liquids.
4. This appliance has a polarized plug (one
blade is wider than the other). To reduce
the risk of shock, this plug is intended
to fit only one way in a polarized outlet.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician.
DO NOT attempt to defeat this safety
feature.
5. Close supervision is necessary when any
appliance is used by or near children.
6. Turn the fan to the position and OFF
unplug the fan from the outlet when not
in use, when moving the fan from one
location to another and before cleaning.
7. To disconnect the fan, first turn control to
the position, grip the plug and pull OFF
it from the wall outlet. Never pull by the
cord.
8. Do not operate the fan in the presence of
explosive and/or flammable fumes.
9. Do not place the fan or any parts near
an open flame, cooking or other heating
appliance.
10. Do not operate the fan with a
damaged cord or plug or if the product
malfunctions, is dropped or damaged in
any manner (see warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not
recommended by the manufacturer may
be hazardous.
13. Place the fan on a dry level surface.
14. Do not hang or mount fan on ceiling.
HF-910 Series cannot be wall mounted.
USER SERVICING INSTRUCTIONS
1. Grasp plug and remove from the receptacle or other outlet device. Do not
unplug by pulling on cord.
2. If your fan loses power and you suspect that the fuse on your fan has
blown, you should first remove the spare fuse holder attached to the cord
plug (Fig. 1). Remove the spare fuse from the plastic spare fuse holder, and
set the spare fuse aside (Fig. 2).
3. You can gain access to the blown fuse by sliding open the door found on
the side of the plug. Slide the door outward until the blown fuse is fully
visible (Fig. 3).
4. Remove the blown fuse and snap the replacement fuse into place. Risk of
fire. Replace fuse only with 2.5 Amp, 125 volt fuse (provided with product).
Fully close the fuse door by sliding back into place. Discard the blown fuse.
The plug should now be ready for normal use
5. Risk of fire. Do not replace attachment plug. Contains a safety device (fuse,
AFCI, LCDI) that should not be removed. Discard product if the attachement
plug is damaged.
6. If you need further information on how or when to replace the fuse in the
safety plug, please contact Kaz Consumer Relations Department by visiting
our website at www.kaz.com or calling 1-800-477-0457.
This fan features a fused safety plug which is designed to cut off electric current to the fan if an
electrical fault occurs. Please see below for more information on how to properly use your fan and
replace the safety plug fuse, if needed.
FUSED SAFETY PLUG - FOR US MODELS ONLY
Fig. 1
Fig. 2
Fig. 3
15. Do not operate if the fan housing is
removed or damaged.
16. A loose fit between the AC outlet
(receptacle) and plug may cause
overheating and a distortion of the plug.
Contact a qualified electrician to replace
loose or worn outlet.
17. Do not operate any fan with a damaged
cord or plug. Discard any damaged fan,
or return the fan to the retailer where the
fan was purchased, or request a return
authorization to return to Kaz, Inc. for
examination and/or repair.
18. Do not run fan cord under carpeting. Do
not cover cord with throw rugs, runners,
or similar coverings. Do not route cord
under furniture or appliances. Arrange
cord away from traffic areas and where it
will not be tripped over.
WARNING: To Reduce The Risk of Fire
or Electric Shock, Do Not Use This Fan With
Any Solid State Speed Conrol Device
The Turbo Force® High Velocity Air Circulator Fans are aerodynamically
designed to give you the versatility of changing this fan’s angular direction
simply by adjusting the fan to ANY desired angular output (Fig.1). Upon
using this fan, you will feel a strong and powerful air stream that will
quickly move air to provide a cooling effect.
INTRODUCTION
Fig. 1
FOR ENERGY
SAVINGS ALL YEAR
Honeywell Air Circulator Fans can help save energy and can
lower monthly utility bills all year round. Our air circulators
increase distribution of cooler air from your air conditioner or
warmer air from your heating system creating a vortex of air
flow for increased comfort. Increased air flow allows the air
conditioning and heating systems to be used at lower settings
to help save you money.
In the summer:
Circulate cool
air by using
with window
or central air
conditioning.
Circulate cool
air upstairs.
In the winter:
Circulate warm
air. Position
your air
circulator in an
open location
for upward air
movement.
Run it on a low
setting to move
the hotter air
from the ceiling
and circulate
the warmer air
throughout the
room.
Increase Heating Source Efficiency: Use
with other heat sources, such as wood stoves,
baseboard heaters, and or vents to help
circulate the warm air throughout the room.

Product specificaties

Merk: Honeywell
Categorie: Ventilator
Model: HF-910 Turbo Force

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell HF-910 Turbo Force stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Ventilator Honeywell

Honeywell

Honeywell QuietSet HS-1665 Handleiding

16 November 2024
Honeywell

Honeywell Febreze Freshness HY-221 Handleiding

16 November 2024
Honeywell

Honeywell Febreze Freshness HY-224 Handleiding

16 November 2024
Honeywell

Honeywell QuietSet HY-254 Handleiding

16 November 2024
Honeywell

Honeywell QuietSet HS-1655 Handleiding

16 November 2024
Honeywell

Honeywell Febreze Freshness HY-201 Handleiding

16 November 2024
Honeywell

Honeywell Febreze Freshness HY-204 Handleiding

16 November 2024
Honeywell

Honeywell QuietSet HY-280 Handleiding

16 November 2024
Honeywell

Honeywell Turbo Force HT-900G Handleiding

5 Juni 2024
Honeywell

Honeywell CL40 Handleiding

20 Februari 2024

Handleiding Ventilator

Nieuwste handleidingen voor Ventilator

Aerian

Aerian MISTY100 Handleiding

17 November 2024
Tornado

Tornado HI-FAN-24HVWM-1P Handleiding

17 November 2024
Tornado

Tornado HI-FAN-24PF-1P Handleiding

17 November 2024
Tornado

Tornado HI-FAN-24MOWF-A-1P Handleiding

17 November 2024
Tornado

Tornado HI-FAN-20HVWM-A-1P Handleiding

17 November 2024
Tornado

Tornado HI-FAN-20WMPRO-1P Handleiding

17 November 2024
Tornado

Tornado HI-FAN-24MOWF-WR-1P Handleiding

17 November 2024
Tornado

Tornado HI-FAN-30HVOF-1P Handleiding

17 November 2024
Tornado

Tornado HI-FAN-30POF-WR-1P Handleiding

17 November 2024
Tornado

Tornado HI-FAN-20POF-5BA-1P Handleiding

17 November 2024