Honeywell 5805 Handleiding
Lees hieronder de đź“– handleiding in het Nederlandse voor Honeywell 5805 (8 pagina's) in de categorie Kluis. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
Models 5805 / 5806
STEEL SECURITY SAFE
Read this manual carefully and never store it inside the safe!
1
Models 5805 / 5806
Steel Security Safe with Digital Lock
PACKAGE CONTENTS
1 – Steel Security Safe
1 – Operation Manual
2 – Override Access Keys
4 – “AA” Batteries
1 – Mounting Kit w/ Bolts
ATTENTION
DO NOT RETURN SAFE TO STORE!
For missing parts or difficulty operating your safe, please contact our Consumer Assistance
Department by telephone.
Store will not accept returned products without prior authorization. You must first contact our
consumer assistance department.
US/Canada 1- - - 877 354 5457 (Toll Free)
Mexico 01- - - 800 288 2872 After English voice recording stops you must then enter 800- -860 1677
to complete your call. (Toll Free)
Australia 0011 800 5325 7000 - - - (Toll Free)
Germany/New Zealand 00 800 5325 7000 - - - (Toll Free)
Other Countries XX*- - - 310 323 5722
- XX* Dial U.S. Country Code first (Toll Charges Apply)
PRODUCT OVERVIEW
A - LED Display panel
B - Safe Cabinet
C - Safe Door
D - Override Key Lock / Removable Cover
E Electronic Digital Keypad-
F - Safe Serial Number
G - -Bottom Panel Pre drilled Mounting Holes
H - -Rear Panel Pre drilled Mounting Holes
2
SETUP & OPERATION
STEP 1 . INSTALL BATTERIES
1. Use the override key to unlock and open the safe.
2. Pull the drawer forward and using a Phillips head screw driver,
remove battery cover located on the inside front panel.
3. Insert (4) “AA” batteries making sure they are installed properly with
regards to (+ - ) polarity. (See Diagram).
4. Replace the battery cover and small screw.
5. Do not close the drawer before testing the digital lock.
IMPORTANT NOTE: The batteries provided with the safe are for use during initial programming
and set-up only. They are not for long term use and should be replaced with (4) long lasting
Alkaline or Lithium batteries.
STEP 2 – - . TEST DIGITAL LOCK FACTORY DEFAULT CODE (159 LOCK)
LOCK SAFE
1. With the drawer open, enter the factory preset pass code: 1-5-9 and press the “LOCK” key.
2. The locking bolts should extend upwards into the locked position and the LED
will display “CLOSED”.
U NLOCK SAFE
1. Enter your new (3-6) digit personal pass code and press the “LOCK” key.
2. The motorized lock will retract the locking bolts into the unlock position and the LED read out
will display “OPENED”
3. Pull the drawer open using the recessed handle .located under the digital keypad
STEP 3 . LOCK and UNLOCK SAFE WITH NEW PASS CODE
LOCK SAFE
1. With the safe unlocked, close the drawer.
2. Enter a new personal pass code of your choice (3-6 digits) and press
the “LOCK” key.
3. The motorized lock will extend the locking bolts into the locked
position.
4. The LED will display “CLOSED” for 3 seconds followed by a read out
of the personal code just entered.
5. Make sure you keep a mental or written record of your new code.
UNLOCK SAFE
1. 6) digit personal Enter your new (3- pass code and press the “LOCK”
key.
2. The motorized lock will retract the locking bolts into the unlock
position and the LED read out will display “OPENED”
3. Pull the drawer open using the recessed handle located under the
digital keypad.
NOTE: The lock design allows for a new user code each time that the safe is locked
PRIVACY MODE
Normal operation will display your pass code on the LED Display as you enter it into the safe. If you
would like to keep your personal code private, press the “CLEAR” button prior to entering your
code. This will prevent the code from being displayed and must be repeated every time you enter
your code if you want to keep it private.
KEYPAD ALERT TONE
To verify entry of the pass code into memory using the keypad, a “Beep” will be heard after each
entry. This feature may be turned off by pressing the “CLEAR” button twice and reactivated by
repeating the process.
Product specificaties
| Merk: | Honeywell |
| Categorie: | Kluis |
| Model: | 5805 |
Heb je hulp nodig?
Als je hulp nodig hebt met Honeywell 5805 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Kluis Honeywell
16 November 2024
16 April 2024
11 Maart 2024
11 Maart 2024
11 Maart 2024
11 Maart 2024
27 Februari 2024
18 December 2023
18 December 2023
18 December 2023
Handleiding Kluis
- Kluis Philips
- Kluis Abus
- Kluis Avanti
- Kluis Burg-Wachter
- Kluis Dometic
- Kluis Duralock
- Kluis EasySafe
- Kluis Ferm
- Kluis Filex
- Kluis FireKing
- Kluis First Alert
- Kluis Fluke
- Kluis Hama
- Kluis Handson
- Kluis M-Locks
- Kluis Master Lock
- Kluis Nauta
- Kluis Nedis
- Kluis Perel
- Kluis Phoenix
- Kluis Protector
- Kluis Renkforce
- Kluis ROMA
- Kluis Rottner
- Kluis Royal Safe
- Kluis Royal Sovereign
- Kluis Salvus
- Kluis Sentry
- Kluis Sistec
- Kluis SMC
- Kluis Sygonix
- Kluis Technomax
- Kluis Thule
- Kluis Toolland
- Kluis Topcraft
- Kluis Tulox
- Kluis Varo
- Kluis Westfalia
- Kluis Workzone
- Kluis Yale
- Kluis Jewel
- Kluis Juwel
- Kluis Olympia
- Kluis Oxloc
- Kluis First Austria
- Kluis Guzzanti
- Kluis Steren
- Kluis Barska
- Kluis Conrad
- Kluis SereneLife
- Kluis Challenge
- Kluis MSW
- Kluis Hard Head
- Kluis Kidde
- Kluis SentrySafe
- Kluis CAWI
- Kluis Kreator
- Kluis Fichero
- Kluis Kreator-Varo
- Kluis Rottner Tresor
- Kluis Olymp
- Kluis Suncast
- Kluis Winholt
- Kluis Homak Security
- Kluis NOFIRE
- Kluis Stamony
Nieuwste handleidingen voor Kluis
14 December 2024
14 December 2024
6 December 2024
6 December 2024
6 December 2024
2 December 2024
2 December 2024
2 December 2024
2 December 2024
2 December 2024