Honeywell 5612 Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Honeywell 5612 (8 pagina's) in de categorie Kluis. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Model 5612
STEEL SECURITY SAFE
Read this manual carefully and never store it inside the safe!
1
Model 5612
Steel Security Safe
PACKAGE CONTENTS
1 – Steel Security Safe
1 – Operation Manual
2 – Override Access Keys
4 – β€œAA” Batteries
1 – Mounting Kit w/ Bolts
ATTENTION
DO NOT RETURN SAFE TO STORE!
For missing parts or difficulty operating your safe, please contact our Consumer Assistance
Department by telephone.
Store will not accept returned products without prior authorization. You must first contact our
consumer assistance department.
US/Canada 1- - - 877 354 5457 (Toll Free)
Mexico 01- - - 800 288 2872 After English voice recording stops you must then enter 800- -860 1677
to complete your call. (Toll Free)
Austrailia - - - 0011 800 5325 7000 (Toll Free)
Germany/New Zealand - - - 00 800 5325 7000 (Toll Free)
Other Countries - - - XX* 310 323 5722 (Toll Charges Apply)
XX*- Dial U.S. Country Code first
PRODUCT OVERVIEW
2
SETUP
STEP 1. OPEN SAFE WITH OVERRIDE KEY
1. Turn the round LCD panel turn to the left and ΒΌ
remove. The override key lock is located behind
the removed LCD panel.
2. Insert override key and turn right to unlock safe.
3. Turn knob to right and open safe door.
STEP 2. INSTALL BATTERIES
1. Remove battery compartment (A) cover on
inside door. Insert 4 β€œAA” batteries (included).
Ensure the batteries are installed in the correct
direction, with regard to polarity (+ and - )
See diagram.
2. Replace the battery cover.
3. Do not close door before testing digital lock.
A
STEP 3. TEST DIGITAL LOCK
1. With door open, turn knob left to put locking door bolts in lock position.
2. Remove override key and store in a secure place.
NEVER STORE KEYS INSIDE SAFE!
3. Enter the preset pass code: β€œ1”- – -β€œ#”. β€œ5” β€œ9”
4. Turn knob to right within 5 seconds.
5. Lock bolts should recede into the unlocked position .
STEP 4. PROGRAM A NEW PASSCODE
1. Slide battery cover to the right until reset button
is uncovered.
2. Press the reset button and then the LCD will
display the symbol and you will hear 2 beeps
to indicate that the safe is in program mode.
3. Enter your new user code (2-8 digits) followed
by pressing #.
4. The LCD screen will flash your new User Code
three times and turn off automatically.
5. Replace battery cover.
NOTE: The factory pre-set code will not work after a new pass code is programmed.
OPERATION
TO OPEN THE SAFE
1. To unlock and open safe, enter the pass code followed by β€œ# ”.
2. Turn door entry knob to the right and open door.
TO CLOSE THE SAFE
1. Close the door and hold it in the closed position.
2. Turn door entry knob to left to engage the lock bolts and lock safe.


Product specificaties

Merk: Honeywell
Categorie: Kluis
Model: 5612

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell 5612 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Kluis Honeywell

Handleiding Kluis

Nieuwste handleidingen voor Kluis