Honeywell 3511 Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Honeywell 3511 (8 pagina's) in de categorie Kluis. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Model 3511
EXECUTIVE / LONG GUN SAFE
Read this manual carefully and never store it inside the safe!
1
Model 3511
EXECUTIVE / LONG GUN SAFE
PACKAGE CONTENTS
1 – Executive / Long Gun Safe
1 – Operation Manual
2 – Override Access Keys
2 – - Storage Box Keys
4 – β€œAA” Batteries
1 – Mounting Kit w/ Bolts
ATTENTION
DO NOT RETURN SAFE TO STORE!
For missing parts or difficulty operating your safe, please contact our Consumer Assistance
Department by telephone.
Store will not accept returned products without prior authorization. You must first contact our
consumer assistance department.
US/Canada 1- - - 877 354 5457 (Toll Free)
Mexico 01- - - 800 288 2872 After English voice recording stops you must then enter 800- -860 1677
to complete your call. (Toll Free)
Australia 0011 800 5325 7000 - - - (Toll Free)
Germany/New Zealand 00 800 5325 7000 - - - (Toll Free)
Other Countries XX*- - - 310 323 5722
- XX* Dial U.S. Country Code first (Toll Charges Apply)
DIGITAL LOCK OVERVIEW
A - Lock Knob
B - Override Key Cover
C - Green LED
D - Red LED
E - Yellow LED
F - Entry Lever Handle
G - Reset Button
H - Battery Compartment
2
SETUP
1. Remove override key cover with small screwdriver.
2. Insert override key and turn left to unlock safe.
3. Turn knob to right (clockwise) and unlock safe
4. Turn lever to right (counter clockwise) to disengage the bolts
and open door.
STEP 2. INSTALL BATTERIES
1. Remove battery compartment (A) cover on inside door. Insert 4
β€œAA” batteries (included). Ensure the batteries are installed in
the correct direction, with regard to polarity (+ and -).
2. Replace the battery cover.
3. Do not close door before testing digital lock.
STEP 3. TEST DIGITAL LOCK
1. With door open, turn knob left to put locking door bolts in lock
position.
2. Remove override key and store in a secure place.
NEVER STORE KEYS INSIDE SAFE!
3. Enter the preset pass code: β€œ1”- – -β€œB”. β€œ5” β€œ9”
4. Turn knob to right within 5 seconds.
5. Lock bolts should recede into the unlocked position .
STEP 4. PROGRAM A NEW PASSCODE
1. With door open, press reset button (C) inside door.
2. Yellow light is on, enter new pass code in 30 seconds.
3. Enter new code (3 to 8 digits) followed by β€œA” or β€œB”.
4. Safe will beep and yellow light will turn off. Lock bolts should
recede into the unlocked position.
OPERATION
TO OPEN THE SAFE
1. unlock and To open safe, enter the pass code
followed by β€œA” or β€œB”.
2. Turn knob to right (clockwise) and unlock safe.
3. Turn lever to right (counter clockwise) to
disengage the bolts and open .
TO CLOSE THE SAFE
1 . Close the door and hold it in the closed position.
2 . Turn lever to left (clockwise) to engage the bolts
and secure door.
3. Turn knob to the left (counter clockwise) and lock
safe.


Product specificaties

Merk: Honeywell
Categorie: Kluis
Model: 3511

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell 3511 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Kluis Honeywell

Handleiding Kluis

Nieuwste handleidingen voor Kluis