Honeywell 3059 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Honeywell 3059 (9 pagina's) in de categorie Kluis. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
Model 3059
LONG GUN / EXECUTIVE SAFE
READ THIS MANUAL CAREFULLY AND
NEVER STORE IT INSIDE THE SAFE!
1
PACKAGE CONTENTS
• Operation Manual
• 2 Override Access Keys
• 1 Mounting Kit w/ Bolts
• 7 Removable Shelves
• 1 Gun Rack
• 24 Shelf Support Clips
ATTENTION
DO NOT RETURN SAFE TO STORE!
For missing parts or difficulty operating your safe, please contact our Consumer
Assistance Department by telephone.
Store will not accept returned products without prior authorization. You must first
contact our consumer assistance department.
US/Canada 1- - - 877 354 5457 (Toll Free)
Mexico 01- - - 800 288 2872 After English voice recording stops you must then enter
800 860 1677 to complete your call. (Toll Free)- -
Australia 0011 800 5325 7000 - - - (Toll Free)
Germany/New Zealand 00 800 5325 7000 - - - (Toll Free)
Other Countries XX*- - - 310 323 5722
- XX* Dial U.S. Country Code first (Toll Charges Apply)
LOCK OVERVIEW
LED Indicator Lights
Digital Keypad
Open/Close Knob
IMPORTANT – TEST DIGITAL LOCK BEFORE INSTALLING!!
2
NOTE: The pass code will not be erased if the batteries become weak or are
removed.
Four alkaline AA batteries, (not included) are required to activate the keypad.
NOTE: Non-alkaline and rechargeable batteries ARE NOT RECOMMENDED.
Dead or weak batteries should always be removed promptly:
When changing batteries you must always replace all 4 batteries.
1. Using two hands, hold the keypad, thumbs
down, on its left and right sides. Push up the
keypad with your thumbs, and disconnect it
from the . safe by pulling it towards you (Fig. A)
2. Let the disengaged keypad hang by its wires.
This will expose the battery holder . (Fig. B)
3. Install four alkaline AA batteries as illustrated
on the back of the battery holder.
4. DO NOT USE Non-alkaline or rechargeable batteries.
5. Ensure the batteries are installed in the correct direction
with regard to polarity (+ and -).
6. Reconnect the keypad by inserting the keypad’s three
posts into the matching holes.
7. Push down to snap into place.
8. The yellow light will come on if your batteries become
weak. If your batteries are dead and you cannot open
the safe by using the digital keypad, you must use the
override access key to open safe and access the battery compartment.
9. Do not close door before testing digital lock.
Remember to always remove batteries from safe if not using for an extended period
of time.
Your electronic lock safe communicates by means of several audio/visual signals.
Red - Error (A):
1. Program key pressed out of sequence.
2. An invalid code or user pin entered.
3. 5 seconds or more between key presses.
4. Lights after three consecutive invalid codes are
input (2-minute delay mode).
Green - Proceed (B):
1. After you enter a valid code, remains lit for 4-
second period which safe can be opened.
2. Remains lit in Programming mode until finished
entering a 5-digit code.
Yellow - Low Battery (C):
Comes ON when the batteries need to be replaced.


Product specificaties

Merk: Honeywell
Categorie: Kluis
Model: 3059

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell 3059 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Kluis Honeywell

Handleiding Kluis

Nieuwste handleidingen voor Kluis