Honeywell 2114 Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Honeywell 2114 (11 pagina's) in de categorie Kluis. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
Models 2111-2115
DIGITAL STEEL FIRE & SECURITY
Read this manual carefully and never store it inside the safe!
1
Models 2111-2115
Digital Steel Security SafeFire &
PACKAGE CONTENTS
1 – Digital Steel Fire & Security Safe
1 – Operation Manual
2 – Entry Keys
1 – Emergency Override Key
4 – β€œAA” Batteries
1 – Silica Gel Pack
ATTENTION
DO NOT RETURN SAFE TO STORE!
For missing parts or difficulty operating your safe, please contact our Consumer
Assistance Department by telephone.
Store will not accept returned products without prior authorization. You must first
contact our consumer assistance department.
US/Canada 1- - - 877 354 5457 (Toll Free)
Mexico 01- - - 800 288 2872 After English voice recording stops you must then enter
800 860 1677 to complete your call. (Toll Free)- -
Australia 0011 800 5325 7000 - - - (Toll Free)
Germany/New Zealand 00 800 5325 7000 - - - (Toll Free)
Other Countries XX*- - - 310 323 5722
- XX* Dial U.S. Country Code first (Toll Charges Apply)
PRODUCT OVERVIEW
2
SETUP & OPERATION
STEP 1: INSTALL BATTERIES
For your convenience, we have included 4 β€œAA” Batteries that provide the
power for the electronic controls. These must be installed before using your
safe.
1. Remove the battery compartment cover
located on the right side of the control panel
by pushing in and to the right.
1.
2. Insert 4 β€œAA” batteries (included). Ensure the
batteries are installed in the correct direction,
with regard to polarity (+ and - ).
2.
3. If the batteries are put in correctly, the safe will
beep and the LCD readout will flash, then it
will read β€œGOOD”
3.
4. Once the batteries are properly installed,
re place the battery compartment cover.
4.
REPLACE BATTERIES:
Weak or dead batteries should be replaced
immediately and all 4 batteries should be
changed. To replace the batteries please
follow the instructions in 1STEP . in the
β€œSETUP” section. Remember to always
remove batteries from safe if not using for an
extended period of time. If your batteries are
completely dead and you cannot open the
safe by using the digital keypad, use the
override access key to open safe.
NOTE: It is NOT RECOMMENDED to use
Non-alkaline or rechargeable batteries.
If the batteries are removed or fail, the keypad memory will NOT be erased
and the active programmed code will still work once power has been
restored.


Product specificaties

Merk: Honeywell
Categorie: Kluis
Model: 2114

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell 2114 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Kluis Honeywell

Handleiding Kluis

Nieuwste handleidingen voor Kluis