Hitachi CP-X8160 Handleiding

Hitachi Beamer CP-X8160

Lees hieronder de 📖 handleiding in het Nederlandse voor Hitachi CP-X8160 (33 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/33

Projector

CP-X8150/CP-X8160/CP-WX8240

CP-WX8255/CP-SX8350/CP-WU8440

CP-WU8450

User's Manual (detailed)

Instant Stack Guide

Thank you for purchasing this product.

WARNING ►Before using this product, be sure to read all manuals for this

product. After reading them, store them in a safe place for future reference.

►Follow all the instructions in the manuals or on the product. The manufacturer

assumes no responsibility for any damage caused by mishandling that is beyond

normal usage dened in the manuals.

NOTE • The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

Trademark acknowledgment

All the trademarks in this manual are the properties of their respective owners.

Various symbols are used in this manual. The meanings of these symbols are

described below.

About this manual

WARNING

CAUTION

NOTICE

This symbol indicates information that, if ignored, could possibly

result in personal injury or even death due to incorrect handling.

This symbol indicates information that, if ignored, could possibly result

in personal injury or physical damage due to incorrect handling.

This entry notices of fear of causing trouble.

Please refer to the pages written following this symbol.



Features

This projector can be used with another projector of the same model to project an

image on the same screen using the Instant Stack feature.

The two projectors can be operated simultaneously to make the image brighter.

Moreover, if you connect two projectors with RS-232C cross-over cable, it turns to

a kind of intellectual stacking system. The two projectors can work alternately by

themselves, and once one projector has an accident the other voluntarily starts to

work to keep your presentation going.

These features, generically called Instant Stack, provide you with the broad use.

  

1. Introduction ........................3

1.1 Basic information

and preparations ............................. 3

Instant Stack ........................................ 3

Intellectual Stack and Simple Stack ..... 3

Remote control for Intellectual Stack

and Simple Stack ............................. 3

2. Installation ..........................5

2.1 Preparing for Intellectual Stack..... 5

2.2 Installing

the rst projector (Set ) ................ 6A

Deciding installation position ............... 6

Setting up Set ................................... 6A

2.3 Installing

the second projector (Set ) .......... 8B

Deciding installation position ............... 8

Connecting projectors .......................... 8

Setting up Set ................................... 8B

2.4 Conrming Main

and Sub settings ............................ 10

2.5 Fine adjusting

image position ............................... 11

For Intellectual Stack users ............... 11

For Simple Stack users ...................... 12

3. STACK menu settings ......13

3.1 Displaying STACK menu ............ 13

3.2 Selecting Main, Sub or off .......... 14

3.3 Selecting lamp operation mode .. 15

3.4 Selecting lamp switching mode .. 17

3.5 Selecting input source for Sub.... 18

3.6 Exiting Intellectual

Stack menu ................................... 19

STACK menu ..................................... 19

Dialog from STACK menu .................. 19

3.7 Important information

for Intellectual Stack ...................... 20

4. Connecting cables ...........23

4.1 Connecting an RS-232C cable ... 23

4.2 Connecting signal cables............ 24

Inputting image from Main to Sub ...... 24

Inputting image

to Sub and Main individually ........... 24

5. Setting input ports

using menu .........................25

5.1 Preparing for menu operations ... 25

5.2 Checking Main projector's

operating status ............................. 25

5.3 Starting up Main projector .......... 26

5.4 Setting the menu ........................ 27

Inputting image from Main to Sub

- Computer signal ........................... 27

Inputting image from Main to Sub

- Video signal

(either component or video) ........... 28

Inputting image to

Sub and Main individually ............... 28

6. Restrictions

on Schedule function ........30

7. Troubleshooting ...............32

Contents

(continued on next page)

1. Introduction

1.1 Basic information and preparations

Instant Stack

Instant Stack is a feature that allows you to superimpose images projected from

two projectors easily.

Intellectual Stack and Simple Stack

Instant Stack includes the following two features.

When two projectors are connected via an RS-232C cable with necessary set-

tings performed on the projectors, these two projectors will automatically operate

in synchronization with each other according to the settings. This is known as

Intellectual Stack in this manual.

The two projectors operate individually without the RS-232C connection. This is

known as Simple Stack in this manual.

Remote control for Intellectual Stack and Simple Stack

For Intellectual Stack, one projector is set as Main and the other is set as Sub.

Only the Main projector is capable of receiving the remote control signals.

Operate

the projectors from the control panel of the Main projector or with the remote control

pointing at the Main projector. For details on operating by remote control and from the

control panel, refer to 3.7 Important Information for Intellectual Stack.

For Simple Stack, both projectors can receive the remote control signals. To avoid

incorrect operations with the remote control, it is recommended to operate both

projectors with the control panel or a wired remote control, or one projector with

the remote control and the other with the control panel or a wired remote control.

In this case, disable the remote control receiving on the other projector with the

KEY LOCK feature. ( → )Operating Guide OPTION menu

CAUTION ► Place the projector in a cool place with sufcient ventilation.

Keep a space of 30 cm or more between a side of the projector and other

objects such as a wall. Keep a space of 100 cm or more between the two

projectors, especially if you are installing the projectors side by side. Take care

not to let the hot exhaust air from other projectors enter the intake vents of the

projector.

WARNING ► Do not place projectors directly on top of other projectors.

Product specificaties

Merk:	Hitachi
Categorie:	Beamer
Model:	CP-X8160
Kleur van het product:	Wit
Gewicht:	8700 g
Breedte:	498 mm
Diepte:	396 mm
Hoogte:	135 mm
Geluidsniveau:	- dB
Gebruikershandleiding:	Ja
Aantal lampen:	1 lampen
Soort lamp:	UHP
Stroombron:	AC
Bluetooth:	Nee
Plaatsing:	Plafond
USB-connectortype:	USB Type-A, USB Type-B
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Ondersteunde video-modi:	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Geïntegreerde geheugenkaartlezer:	Nee
Typische contrastverhouding:	3000:1
Zoomcapaciteit:	Ja
Projector helderheid:	6000 ANSI lumens
Projectietechnologie:	LCD
Projector native resolution:	XGA (1024x768)
Geschikt voor schermmaten:	30 - 600 "
Projectie-afstand objectief:	0.9 - 36.8 m
Matrix grootte:	0.8 "
Aantal USB 2.0-poorten:	3
VGA (D-Sub)poort(en):	2
Aantal HDMI-poorten:	2
Soort serieële aansluiting:	RS-232
Audio-ingang (L, R):	1
Composiet video-ingang:	1
Componentingang video (YPbPr/YCbCr):	1
S-Video ingang:	1
DVI-poort:	Nee
Aantal Ethernet LAN (RJ-45)-poorten:	1
Brandpuntbereik:	- mm
Levensduur van de lichtbron:	- uur
Type lichtbron:	Lamp
Bevestigingsmogelijkheid voor kabelslot:	Ja
Kabelslot sleuf type:	Kensington
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	16 W
Aantal ingebouwde luidsprekers:	2
Stroomverbruik (in standby):	- W
Certificering:	UL/cUL, FCC Part15 class A, AS/NZS CISPR22 class A, CE, GOST-R
Zoomverhouding:	2.0:1
Formaat analoog signaal:	NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Volledige HD:	Nee
HDCP:	Ja
RS-232 port:	1
Lampvermogen:	330 W
Audio-ingangen:	3
Audio-uitgang:	1
Ondersteunde grafische resoluties:	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1360 x 768 (WXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
Duurzaamheidscertificaten:	RoHS
Beeldverhouding:	4:3
Audio (L,R) out:	1
Matrix type:	3-panel (p-Si TFT actief)
Type CardBus PCMCIA-slot:	Nee
BNC input ports:	5
HD-Ready:	Nee
Afstandsbediening inbegrepen:	Ja
AC-ingangsspanning:	100 - 240 V
Bedrijfstemperatuur (T-T):	0 - 45 °C
Batterijen inbegrepen:	Ja
Type product:	Projector met normale projectieafstand