Hitachi CP-WX3042WN Handleiding

Hitachi Beamer CP-WX3042WN

Lees hieronder de 📖 handleiding in het Nederlandse voor Hitachi CP-WX3042WN (20 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

ENGLISH

WARNING ►Before using this product, be sure to read all manuals for this

product. After reading them, store them in a safe place for future reference.

►Heed all the warnings and cautions in the manuals or on the product.

►Follow all the instructions in the manuals or on the product.



First of all ............................................ 2

Entries and graphical symbols explanation ......2

Important safety instruction ..............................2

Regulatory notices .............................. 3

About Electro-Magnetic Interference ................

About Waste Electrical and Electronic Equipment

...4

Contents of package........................... 4

Preparing for the remote control ......... 5

Arrangement ....................................... 6

Connecting with your devices ............. 7

Fastening the adapter cover ............... 8



Connecting power supply ................... 9

Turning on the power ........................ 10

Adjusting the projector's elevator ..... 11

Displaying the picture ....................... 12

Turning off the power ........................ 13

Replacing the lamp ........................... 14

Cleaning and replacing the air lter

.. 16

Using the CD manual ....................... 17

Specications ................................... 18

Troubleshooting

- Warranty and after-service ........... 19

Contents

NOTE • In this manual, unless any comments are accompanied, “the

manuals” means all the documents provided with this product, and “the product”

means this projector and all the accessories came with the projector.

LCD Projector

CP-X2542WN/CP-X3042WN/CP-X3542WN/

CP-X4042WN/CP-WX3042WN/CP-WX4042WN

User's Manual (concise)

Thank you for purchasing this projector.

Please read through this manual before using this product, in order to use safely

and utilize well the product.

First of all

Entries and graphical symbols explanation

The following entries and graphical symbols are used for the manuals and the

product as follows, for safety purpose. Please know their meanings beforehand,

and heed them.

Important safety instruction

The followings are important instructions for safely using the product. Be sure to

follow them always when handling the product. The manufacturer assumes no

responsibility for any damage caused by mishandling that is beyond normal usage

dened in these manuals of this projector.

WARNING

This entry warns of a risk of serious personal injury or even death.

CAUTION This entry warns of a risk of personal injury or physical damage.

NOTICE This entry notices of fear of causing trouble.

WARNING ►Never use the product in or after an abnormality (ex. giving

off smoke, smelling strange, took a liquid or an object inside, broken, etc.) If an

abnormality should occur, unplug the projector urgently.

►Situate the product away from children and pets.

►Keep small parts away from children and pets. If swallowed, consult a

physician immediately for emergency treatment.

►Do not use the product when there is fear of a thunderbolt.

►Unplug the projector from the power outlet if the projector is not used for the

time being.

►Do not open or remove any portion of the product, unless the manuals direct

it. For internal maintenance, leave it to your dealer or their service personnel.

►Use only the accessories specied or recommended by the manufacturer.

►Do not modify the projector or accessories.

►Do not let any things or any liquids enter to the inside of the product.

►Do not wet the product.

►Do not place the projector where any oils, such as cooking or machine oil,

are used. Oil may harm the product, resulting in malfunction, or falling from the

mounted position.

►Do not apply a shock or pressure to this product.

- Do not place the product on an unstable place such as the uneven surface or

the leaned table.

- Do not place the product unstably. Place the projector so that it does not

protrude from the surface where the projector is placed on.

- Remove all the attachments including the power cord and cables, from the

projector when carrying the projector.

►

Do not look into the lens and the openings on the projector, while the lamp is on,

since the projection ray may cause a trouble on your eyes.

►

Do not approach the lamp cover and the exhaust vents, while the projection lamp

is on. Also after the lamp goes out, do not approach them for a while, since too hot.

ENGLISH

Regulatory notices

About Electro-Magnetic Interference

In CANADA

CAN ICES-3(B) / NMB-3(B).

In the US, and other places where the FCC regulations are applicable

Declaration of Conformity

Trade name HITACHI

Model Number

CP-X2542WN/CP-X3042WN/CP-X3542WN/CP-X4042WN

CP-WX3042WN/CP-WX4042WN

Responsible Party Hitachi America, Ltd.

Address

2420 Fenton Street, Suite 200 Chula Vista,CA 91914 U.S.A.

Telephone Number +1 -800-448-2244

This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation. This equipment

has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

INSTRUCTIONS TO USERS: This equipment complies with the requirements of

FCC (Federal Communication Commission) equipment provided that the following

conditions are met. Some cables have to be used with the core set. Use the

accessory cable or a designated-type cable for the connection. For cables that

have a core only at one end, connect the core to the projector.

CAUTION:

Changes or modications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

As with any bright source, do not

stare into the direct beam, RG2

IEC 62471-5:2015.

Product specificaties

Merk:	Hitachi
Categorie:	Beamer
Model:	CP-WX3042WN
Kleur van het product:	Wit
Ingebouwd display:	Nee
Gewicht:	3099 g
Breedte:	320 mm
Diepte:	245 mm
Hoogte:	85 mm
Geluidsniveau:	37 dB
Gebruikershandleiding:	Ja
Stroombron:	AC
Plaatsing:	Desktop
Afstandsbediening:	IR
Oorspronkelijke beeldverhouding:	16:10
Interne opslagcapaciteit:	- GB
Ethernet LAN:	Ja
Ondersteunde video-modi:	480i, 480p, 525i, 720p, 1080i, 1080p
Meegeleverde kabels:	AC
Geïntegreerde geheugenkaartlezer:	Nee
Typische contrastverhouding:	10000:1
Zoomcapaciteit:	Ja
Snelstartgids:	Ja
Projector helderheid:	3000 ANSI lumens
Projectietechnologie:	3LCD
Projector native resolution:	WXGA (1280x800)
Keystone correctie, verticaal:	-30 - 30 °
Keystone correctie, horizontaal:	-30 - 30 °
Geschikt voor schermmaten:	30 - 300 "
Projectie-afstand objectief:	- m
Aantal kleuren:	16.78 miljoen kleuren
Matrix grootte:	- "
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	2
Aantal HDMI-poorten:	2
Soort serieële aansluiting:	RS-232
Audio-ingang (L, R):	1
Composiet video-ingang:	1
Componentingang video (YPbPr/YCbCr):	1
DVI-poort:	Nee
Aantal Ethernet LAN (RJ-45)-poorten:	1
Focus:	Handmatig
Zoom type:	Handmatig
Brandpuntbereik:	- mm
Levensduur van de lichtbron:	5000 uur
Bevestigingsmogelijkheid voor kabelslot:	Ja
Ingebouwde luidsprekers:	Nee
Stroomverbruik (in standby):	0.5 W
Hoofdtelefoonuitgangen:	1
Ondersteunde beeldverhoudingen:	16:10
Zoomverhouding:	1.2:1
Throw ratio:	1.5 - 1.8:1
Formaat analoog signaal:	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
HDCP:	Ja
RS-232 port:	1
3D:	Nee
Ondersteunde grafische resoluties:	1152 x 864 (XGA+), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1280 x 800 (WXGA), 1360 x 768 (WXGA), 1400 x 1050 (SXGA+), 1680 x 1050 (WSXGA+)
Plug and play:	Ja
On Screen Display (OSD):	Ja
Temperatuur bij opslag:	- °C
Projectie afstand (tele):	1.1 - 11.5 m
Levensduur van de lichtbron (besparingsmodus):	10000 uur
AC-adapter, uitgangsspanning:	- V
Geluidsniveau (spaarzame modus):	29 dB
Projectie afstand (breed):	0.9 - 9.6 m
Projector helderheid (spaarzame modus):	2010 ANSI lumens
Afstandsbediening inbegrepen:	Ja
Lamp sterkte (spaarzame modus):	- W
AC-ingangsspanning:	220 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	- °C
Batterijen inbegrepen:	Ja
Type product:	Projector met normale projectieafstand
Video kleurenmodi:	Blackboard, Dynamic, Game, Whiteboard
Voltage tolerantie:	- procent
Horizontale resolutie:	- regels