Hitachi CP-DX300 Handleiding

Hitachi Beamer CP-DX300

Lees hieronder de 📖 handleiding in het Nederlandse voor Hitachi CP-DX300 (60 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/60

Projector

CP-DX250/CP-DX300

User Manual

Thank you for purchasing this product. Please

read this manual before you operate your

projector. Save it for future reference.

Table of contents

Important safety

instructions .......................2

Introduction......................4

Projector features .................................4

Shipping contents ................................. 5

Projector exterior view......................... 6

Controls and functions ......................... 7

Positioning your

projector..........................10

Choosing a location............................ 10

Projection dimensions ........................ 11

Connection ......................12

Connecting a computer or monitor .... 13

Connecting Video source devices ...... 14

Operation ........................17

Starting up the projector..................... 17

Using the menus................................. 18

Utilizing the password function ......... 19

Switching input signal........................ 21

Adjusting the projected image ........... 22

Magnifying and searching for details. 23

Selecting the aspect ratio ................... 24

Optimizing the image......................... 26

Setting the presentation timer ............ 29

Hiding the image................................ 30

Locking control keys.......................... 30

Freezing the image............................. 30

Operating in a high altitude

environment ....................................... 31

Shutting down the projector...............31

Menu operation ..................................32

Maintenance ...................41

Care of the projector .......................... 41

Lamp information .............................. 42

Troubleshooting .............47

Specifications ..................48

Projector specifications...................... 48

Dimensions ........................................ 50

Timing chart ...................................... 51

Regulation Statements ...55

FCC statement ................................... 55

ICES-003 ........................................... 55

WEEE................................................ 55

Warranty and

after-service ....................58

Entries and graphical symbols expla-

nation

The following entries and graphical symbols are

used for the manuals and the product as follows,

for safety purpose. Please know their meanings

beforehand, and heed them.

WARNING: This entry warns of a risk of

serious personal injury or even death.

CAUTION: This entry warns of a risk of

personal injury or physical damage.

Important safety instructions

Your projector is designed and tested to meet the latest standards for safety of information

technology equipment. However, to ensure safe use of this product, it is important that you

follow the instructions mentioned in this manual and marked on the product.

Safety Instructions

WARNING

1. Please read this manual before you operate your projector. Save it for future

reference.

2. Do not look straight at the projector lens during operation. The intense light beam

may damage your eyes.

3. Refer servicing to qualified service personnel.

4. Always open the lens shutter or remove the lens cap when the projector lamp is

on.

5. In some countries, the line voltage is NOT stable. This projector is designed to operate

safely within a mains voltage between 100 to 240 volts AC, but could fail if power

cuts or surges of ±10 volts occur. In areas where the mains voltage may fluctuate

or cut out, it is recommended that you connect your projector through a power

stabilizer, surge protector or uninterruptible power supply (UPS).

6. Do not block the projection lens with any objects when the projector is under

operation as this could cause the objects to become heated and deformed or even

cause a fire. To temporarily turn off the lamp, press BLANK on the projector or

remote control.

7. The lamp becomes extremely hot during operation. Allow the projector to cool for

approximately 45 minutes prior to removing the lamp assembly for replacement.

8. Never replace the lamp assembly or any electronic components unless the projector is

unplugged.

9. Do not place this product on an unstable cart, stand, or table. The product may fall,

sustaining serious damage.

10. Do not attempt to disassemble this projector. There are dangerous high voltages inside

which may cause death if you should come into contact with live parts. The only user

serviceable part is the lamp which has its own removable cover.

Under no circumstances should you ever undo or remove any other covers. Refer

servicing only to suitably qualified professional service personnel.

11. Do not place this projector in any of the following environments.

- Space that is poorly ventilated or confined. Allow at least 50 cm clearance from walls

and free flow of air around the projector.

- Locations where temperatures may become excessively high, such as the inside of a

car with all windows rolled up.

- Locations where excessive humidity, dust, or cigarette smoke may contaminate optical

components, shortening the projector's life span and darkening the picture.

- Locations near fire alarms

- Locations with an ambient temperature above 40°C / 104°F

- Locations where the altitudes are higher than 3000 m (10000 feet).

Product specificaties

Merk:	Hitachi
Categorie:	Beamer
Model:	CP-DX300
Kleur van het product:	Wit
Ingebouwd display:	Nee
Gewicht:	2200 g
Breedte:	265 mm
Diepte:	223 mm
Hoogte:	81.5 mm
Geluidsniveau:	33 dB
Gebruikershandleiding:	Ja
Soort lamp:	UHP
Stroombron:	AC
LED-indicatoren:	Ja
Automatisch uitschakelen:	Ja
Oorspronkelijke beeldverhouding:	16:10
Ethernet LAN:	Ja
Geïntegreerde geheugenkaartlezer:	Nee
Typische contrastverhouding:	2500:1
Snelstartgids:	Ja
Markt positionering:	Short throw
Projector helderheid:	3000 ANSI lumens
Projectietechnologie:	3LCD
Projector native resolution:	XGA (1024x768)
Geschikt voor schermmaten:	30 - 300 "
Projectie-afstand objectief:	1 - 8 m
Aantal kleuren:	1.073 biljoen kleuren
Aantal USB 2.0-poorten:	1
VGA (D-Sub)poort(en):	1
Aantal HDMI-poorten:	1
Soort serieële aansluiting:	RS-232
Audio-ingang (L, R):	1
Composiet video-ingang:	1
Componentingang video (YPbPr/YCbCr):	1
S-Video ingang:	1
DVI-poort:	Nee
Aantal Ethernet LAN (RJ-45)-poorten:	1
Focus:	Automatisch/handmatig
Brandpuntbereik:	- mm
Levensduur van de lichtbron:	4500 uur
Type lichtbron:	Lamp
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	2 W
Aantal ingebouwde luidsprekers:	1
Stroomverbruik (in standby):	0.5 W
Certificering:	UL60950-1/cUL, FCC Part 15 subpart B class B, CE Marking: EN61000-3-2, EN61000-3-3, EN55022, EN55024 (EMC Directive), EN60950-1 (Low voltage directive), WEEE, RoHS, ErP (lot6) compliant, TUV GS, GOST-R
Ondersteunde beeldverhoudingen:	4:3,16:9,16:10
Formaat analoog signaal:	NTSC,NTSC 4.43,PAL,PAL M,PAL N,SECAM
Volledige HD:	Nee
HDCP:	Ja
RS-232 port:	1
3D:	Nee
Lampvermogen:	196 W
Plug and play:	Ja
On Screen Display (OSD):	Ja
Levensduur van de lichtbron (besparingsmodus):	6000 uur
AUX ingang:	Ja
HD-Ready:	Ja
Afstandsbediening inbegrepen:	Nee
Wifi:	Nee
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	235 W
Type product:	Projector met normale projectieafstand