Hikvision DS-2DF8225IH-AEL Handleiding

Hikvision Bewakingscamera DS-2DF8225IH-AEL

Lees hieronder de 📖 handleiding in het Nederlandse voor Hikvision DS-2DF8225IH-AEL (139 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/139

Network Speed Dome

User Manual

UD13679B

User Manual of Network Speed Dome

User Manual

Any and all informaon, including, among others, wordings, pictures, graphs are the properes of

Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinaer referred to be

“Hikvision”). This user manual (hereinaer referred to be the Manual cannot be reproduced, “ ”)

changed, translated, or distributed, parally or wholly, by any means, without the prior wrien

permission of Hikvision. Unless otherwise spulated, Hikvision does not make any warranes,

guarantees or representaons, express or implied, regarding to the Manual.

About this Manual

This Manual is applicable to Network Speed Dome.

The Manual includ instrucons for using and managing the product. Pictures, charts, images and all es

other informaon hereinaer are for descripon and explanaon only. The informaon contained in

the Manual is subject to change, without noce, due to rmware updates or other reasons. Please

nd the latest version in the company website (hp://overseas.hikvision.com/en/).

Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the properties of Hikvision in various

jurisdicons. Other trademarks and logos menoned below are the properes of their respective

owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS

HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED AS IS“ ”, WITH ALL FAULTS AND ERRORS, AND

HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,

MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND

NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,

EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR

INDIRECT DAMAGES INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, ,

BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE

OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT

YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS

INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION PLEASE CHECK ALL RELEVANT LAWS IN YOUR .

JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE

APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH

ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER

PREVAILS.

05060020190221

Figure 2-6 iVMS- Control Panel 4200

2. Click Device Management to enter the Device Management interface, as shown Figure in

2-7.

Figure 2-7 Device Management Interface

3. Check the device status from the device list, and select an inactive device.

4. Click Activate to pop up the Activation interface.

5. Create a password and input the password in the password field, and confirm the password.

2.2.2 Dynamic IP Connection

Before you start:

Apply a dynamic IP from an ISP. With the dynamic IP address, you can connect the network

camera to a modem or a router.

 Connecting the network camera via a router

Steps:

1. Connect the network camera to the router.

2. In the camera, assign a LAN IP address, the subnet mask and the gateway. Refer to Section

2.1.2 for detailed LAN configuration.

3. In the router, set the PPPoE user name, password and confirm the password.

 For your privacy and to better protect your system against security risks, we strongly

recommend the use of strong passwords for all functions and network devices. The

password should be something of your own choosing (using a minimum of 8 characters,

including upper case letters, lower case letters, numbers and special characters) in order

to increase the security of your product.

 Proper configuration of all passwords and other security settings is the responsibility of

the installer and/or end-user.

4. Set port mapping. e.g. 80, 8000 and 554 ports. The steps for port mapping vary depending on

different routers. Call the router manufacturer for assistance with port mapping.

5. Apply a domain name from a domain name provider.

6. Configure the DDNS settings in the setting interface of the router.

7. Visit the camera via the applied domain name.

 Connecting the network camera via a modem

Purpose:

This camera supports the PPPoE auto dial-up function. The camera gets a public IP address by

ADSL dial-up after the camera is connected to a modem. You need to configure the PPPoE

parameters of the network camera. Refer to Section 6.1.1 Configuring PPPoE Settings for

detailed configuration.

Note:

The obtained IP address is dynamically assigned via PPPoE, so the IP address always changes after

rebooting the camera. To solve the inconvenience of the dynamic IP, you need to get a domain

name from the DDNS provider (e.g. DynDns.com). Follow the steps below for normal domain

name resolution and private domain name resolution to solve the problem.

 Normal Domain Name Resolution

Steps:

1. Apply a domain name from a domain name provider.

2. Configure the DDNS settings in the DDNS Settings interface of the network camera. Refer to

Section 6.1.1 Configuring DDNS Settings for detailed configuration.

Figure 4-1 Live View Parameters

 Record File Settings: Set the saving path of the video files.

 Record File Size: Select the packed size of manually recorded downloaded video filesand .

The size can be set to 256M, 512M or 1G.

 Save record files to: Set the saving path for the manually recorded video files.

 Save downloaded files to: Set the saving path for the downloaded video files in

interface.

 Picture and Clip Settings: Set the saving paths of the captured pictures and clipped video

files.

 Save snapshots in live view to: Set the saving path the manually captured pictures in of

interface.

 Save snapshots when playback to: Set the saving path the captured pictures in of

interface.

 Save clips to: Set the saving path the clipped video files in interface. of

You can click Browse to change the directory for saving video files, clips and pictures.

You can click Open to directly open the video files, clips and pictures.

3. Click to save the settings.

4.3 Live View Page

Purpose:

The live video page allows you to view live video, capture images, realize PTZ control, set/call

presets and configure video parameters.

L the network camera enter the live view page, or you can click on the menu og in to

bar of the main page to enter the live view page.

Note:

The functions vary depending on different camera models. Take the actual interface as standard.

Descriptions of the Live View page:

Product specificaties

Merk:	Hikvision
Categorie:	Bewakingscamera
Model:	DS-2DF8225IH-AEL
Kleur van het product:	Zwart
Gewicht:	8000 g
Hoogte:	410 mm
Soort:	IP-beveiligingscamera
Internationale veiligheidscode (IP):	IP66
Bluetooth:	Nee
Maximale capaciteit van de geheugenkaart:	256 GB
Ondersteunde videoformaten:	H.264, H.265, H.265+
Vormfactor:	Dome
Ondersteuning voor plaatsing:	Binnen & buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Montagewijze:	Plafond
Maximum resolutie:	1280 x 960 Pixels
Videocompressieformaten:	MPEG
Diameter:	266.6 mm
Type stroombron:	Power over Ethernet (PoE)
Minimale belichting:	0 Lux
Aantal cameras:	1
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	SD, SDHC, SDXC
Ingebouwde HDD:	Ja
Nachtvisie:	Ja
Zoomcapaciteit:	Ja
Focus:	Gemotoriseerde/handmatig
Brandpuntbereik:	- mm
Vermogensverbruik (max):	60 W
Formaat analoog signaal:	NTSC, PAL
Omvang optische sensor:	1/2.8 "
Type beeldsensor:	CMOS
Optische zoom:	25 x
Camera sluitertijd:	1~1/30000s s
Witbalans:	Auto, Manual
Password bescherming:	Gebruiker
Ondersteunde grafische resoluties:	352 x 240,1280 x 960
Webbrowser:	Ja
Maximaal 30 frames per seconde:	30 fps
IP-adresfilter:	Ja
Power over Ethernet (PoE):	Ja
PTZ control:	Ja
Pan bereik:	0 - 360 °
Dag/nacht modus:	Ja
Minimum aperture number:	1.5
Draai-snelheid:	150 °/sec
Pan snelheid:	210 °/sec
Vooringestelde snelheid pan:	280 °/sec
Weerbestendig:	Ja
Nachtkijker afstand:	200 m
Achtergrondverlichting compensatie:	Ja
Aantal effectieve pixels (H x V):	1920 x 1080 Pixels
Vooraf ingestelde punten:	Ja
Alarm ingang/uitgang:	Ja
Highlight Compensation (HLC) (compensatie voor sterke belichting):	Ja
Stroomverbruik (voeding via Ethernet (PoE)):	50 W
Wide Dynamic Range (WDR):	Ja
Wifi:	Nee
AC-ingangsspanning:	24 V
Bedrijfstemperatuur (T-T):	-40 - 65 °C
Bereik kantelhoek:	-20 - 90 °
Kijkhoek lens, horizontaal:	58.2 °
Kijkhoek lens, diagonaal:	66.8 °
Kijkhoek lens, verticaal:	32.4 °
Automatische pan-modus:	Ja
Automatische patrol-modus:	Ja
Vooringestelde snelheid tilt:	250 °/sec