Hikoki GP3V Handleiding

Hikoki Slijpmachine GP3V

Lees hieronder de 📖 handleiding in het Nederlandse voor Hikoki GP3V (45 pagina's) in de categorie Slijpmachine. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/45

DOUBLE INSULATION

DOUBLE ISOLATION

AISLAMIENTO DOBLE

Model

Modèle

Modelo GP 3V • GP 5V

Electronic Hand Grinder

Meuleuse droite électronique

Amoladora recta electrónica

SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL

WARNING

IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!

This manual contains important information about product safety. Please read and

understand this manual BEFORE operating the power tool. Please keep this manual

available for other users and owners before they use the power tool.

This manual should be stored in safe place.

INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI

AVERTISSEMENT

Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la

mort ou de sérieuses blessures corporelles !

Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.

Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder

ce mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils

utilisent l’outil motorisé.

Ce mode d’emploi doit être conservé dans un endroit sûr.

INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES

ADVERTENCIA

¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar

en lesiones de gravedad o la muerte!

Este manual contiene información importante sobre la seguridad del producto. Lea y

comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual

para que puedan leerlo otras personas antes de utilizar la herramienta eléctrica.

Este manual debe ser guardado en un lugar seguro.

GP3V GP5V

CONTENTS

English Page Page

IMPORTANT SAFETY INSTRUCTIONS ...................... 3

MEANINGS OF SIGNAL WORDS ...............................3

SAFETY ...................................................................... 3

GENERAL POWER TOOL SAFETY WARNINGS ...... 3

SAFETY WARNINGS COMMON FOR

GRINDING OPERATIONS .................................... 4

KICKBACK AND RELATED WARNINGS .................. 5

SAFETY WARNINGS SPECIFIC FOR

GRINDING OPERATIONS ................................... 6

GENERAL SAFETY INSTRUCTIONS FOR

GRINDERS .......................................................... 6

SPECIFIC SAFETY RULES AND SYMBOLS ........... 6

DOUBLE INSULATION FOR SAFER OPERATION ... 8

FUNCTIONAL DESCRIPTION ...................................9

NAME OF PARTS ..................................................... 9

SPECIFICATIONS ....................................................9

ASSEMBLY AND OPERATION ................................10

APPLICATIONS ...................................................... 10

PRIOR TO OPERATION ......................................... 10

GRINDER OPERATION ......................................... 11

MAINTENANCE AND INSPECTION ........................ 13

ACCESSORIES ........................................................ 14

STANDARD ACCESSORIES ..................................14

OPTIONAL ACCESSORIES ...................................14

PARTS LIST .............................................................. 41

TABLE DES MATIERES

Français Page Page

CONSIGNES DE SÉCURITÉ IMPORTANTES .......... 15

SIGNIFICATION DES MOTS D’AVERTISSEMENT ... 15

SECURITE ................................................................15

AVERTISSEMENTS DE SÉCURITÉ GÉNÉRAUX

CONCERNANT LES OUTILS ÉLECTRIQUES ... 15

AVERTISSEMENTS DE SÉCURITÉ COURANTS

AUX OPÉRATIONS DE MEULAGE .................... 17

RECUL DE L'APPAREIL ET

AVERTISSEMENTS ASSOCIÉS ......................... 18

AVERTISSEMENTS DE SÉCURITÉ SPÉCIFIQUES

AUX OPÉRATIONS DE MEULAGE ..................... 18

CONSIGNES DE SECURITE GENERALES

RELATIVES AUX MEULEUSES DROITES ......... 19

REGLES DE SECURITE SPECIFIQUES ET

SYMBOLES ....................................................... 19

DOUBLE ISOLATION POUR UN

FONCTIONNEMENT PLUS SUR ....................... 21

DESCRIPTION FONCTIONNELLE .......................... 22

NOM DES PARTIES ............................................... 22

SPECIFICATIONS ..................................................22

ASSEMBLAGE ET FONCTIONNEMENT ................. 23

APPLICATIONS ...................................................... 23

AVANT L’UTILISATION ........................................... 23

FONCTIONNEMENT DE LA MEULEUSE .............. 25

ENTRETIEN ET INSPECTION .................................26

ACCESSOIRES ........................................................ 27

ACCESSOIRES STANDARD ..................................27

ACCESSOIRES SUR OPTION ...............................27

LISTA DES PIÈCES .................................................. 41

ÍNDICE

Español Página Página

INSTRUCCIONES IMPORTANTES

SOBRE SEGURIDAD ...........................................28

SIGNIFICADO DE LAS PALABRAS

DE SEÑALIZACIÓN ............................................ 28

SEGURIDAD .............................................................28

ADVERTENCIAS DE SEGURIDAD GENERAL DE

LA HERRAMIENTA ELÉCTRICA ........................ 28

ADVERTENCIAS COMUNES DE SEGURIDAD

PARA LAS OPERACIONES DE MOLIDO .......... 30

REBOTE Y ADVERTENCIAS RELACIONADAS ...... 31

ADVERTENCIAS DE SEGURIDAD ESPECÍFICAS

PARA LAS OPERACIONES DE MOLIDO ........... 31

INSTRUCCIONES GENERALES DE SEGURIDAD

PARA AMOLADORAS ........................................ 32

NORMAS Y SÍMBOLOS ESPECÍFICOS

DE SEGURIDAD ................................................. 32

AISLAMIENTO DOBLE PARA OFRECER UNA

OPERACIÓN MÁS SEGURA .............................. 34

DESCRIPCIÓN FUNCIONAL ................................... 35

NOMENCLATURA .................................................. 35

ESPECIFICACIONES .............................................35

MONTAJE Y OPERACIÓN ....................................... 36

APLICACIONES ..................................................... 36

ANTES DE LA OPERACIÓN .................................. 36

OPERACIÓN DE LA AMOLADORA ........................ 38

MANTENIMIENTO E INSPECCIÓN ......................... 39

ACCESORIOS ..........................................................40

ACCESORIOS ESTÁNDAR ....................................40

ACCESORIOS OPCIONALES ................................40

LISTA DE PIEZAS .................................................... 41

English

IMPORTANT SAFETY INSTRUCTIONS

Read and understand all of the safety precautions, warnings and operating instructions in the Instruction Manual before

operating or maintaining this power tool.

Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety

rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it occurs,

and by observing appropriate safety procedures.

Basic safety precautions are outlined in the “SAFETY” section of this Instruction Manual and in the sections which contain

the operation and maintenance instructions.

Hazards that must be avoided to prevent bodily injury or machine damage are identiﬁ ed by WARNINGS on the power tool

and in this Instruction Manual.

NEVER use this power tool in a manner that has not been speciﬁ cally recommended by metabo HPT.

MEANINGS OF SIGNAL WORDS

WARNING indicates a potentially hazardous situations which, if ignored, could result in death or serious injury.

CAUTION indicates a potentially hazardous situations which, if not avoided, may result in minor or moderate injury, or may

cause machine damage.

NOTE emphasizes essential information.

SAFETY

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂ ammable liquids, gases or dust.

Power tools create sparks which may ignite the

dust or fumes.

c) Keep children and bystanders away while

operating a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way.

Do not use any adapter plugs with earthed

(grounded) power tools.

Unmodified plugs and matching outlets will

reduce risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators.

There is an increased risk of electric shock if your

body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions.

Water entering a power tool will increase the risk

of electric shock.

d) Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the power

tool.

Keep cord away from heat, oil, sharp edges

or moving parts.

Damaged or entangled cords increase the risk of

electric shock.

e) When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces

the risk of electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply.

Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired

or under the inﬂ uence of drugs, alcohol or

medication.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in electric shock, ﬁ re and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless)

power tool.

Product specificaties

Merk:	Hikoki
Categorie:	Slijpmachine
Model:	GP3V
Kleur van het product:	Black, Green, Grey
Gewicht:	1800 g
Diepte:	406 mm
Stroombron:	AC
Input vermogen:	760 W
Stationair toerental (max):	29000 RPM
Aanpasbare snelheid:	Ja
Stationair toerental (min):	7000 RPM
Extra handgreep:	Ja
Type product:	Rechte slijpmachine