Hanwha XNF-8010RVM Handleiding

Hanwha Bewakingscamera XNF-8010RVM

Lees hieronder de đź“– handleiding in het Nederlandse voor Hanwha XNF-8010RVM (72 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 99 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/72
NETWORK CAMERA
User Manual
XNF-8010R/XNF-8010RV/XNF-8010RVM
Copyright
©2017 Hanwha Techwin Co., Ltd. All rights reserved.
Trademark
Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their
respective company.
Restriction
Copyright of this document is reserved. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without
formal authorization.
Disclaimer
Hanwha Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be
provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Hanwha Techwin reserves the
right to change the contents of this document without prior notice.
Design and specications are subject to change without prior notice.
The initial administrator ID is “admin” and the password should be set when logging in for the rst time.
Please change your password every three months to safely protect personal information and to prevent the damage of the information
theft.
Please, take note that it’s a user’s responsibility for the security and any other problems caused by mismanaging a password.
Network Camera
User Manual
English _3
â—Źâ—ŹOVERVIEW
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean the contaminated area on the product surface with a soft, dry cloth or a damp cloth.
(Do not use a detergent or cosmetic products that contain alcohol, solvents or surfactants or oil constituents
as they may deform or cause damage to the product.)
7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11. Only use attachments/ accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lighting storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15. This product is intended to be supplied by a Listed Power Supply Unit marked “Class 2” or “LPS” and rated
from 12 Vdc, 1.1 A for XNF-8010RVM*, XNF-8010RV*, 12 Vdc, 1.0 A for XNF-8010R*.
16. If you use excessive force when installing the product, the camera may be damaged and malfunction.
If you forcibly install the product using non-compliant tools, the product may be damaged.
17. Do not install the product in a place where chemical substances or oil mist exists or may be generated. As
edible oils such as soybean oil may damage or warp the product, do not install the product in the kitchen or
near the kitchen table.
This may cause damage to the product.
18. When installing the product, be careful not to allow the surface of the product to be stained with chemical
substance.
Some chemical solvents such as cleaner or adhesives may cause serious damage to the product’s surface.
19. If you install/disassemble the product in a manner that has not been recommended, the production functions/
performance may not be guaranteed.
Install the product by referring to “Installation & connection” in the user manual.
20. Installing or using the product in water can cause serious damage to the product.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE
VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT.
Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
To prevent injury, this apparatus must be securely attached to the Wall/ceiling in accordance
with the installation instructions.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the product.
WARNING
yTo prevent damage which may caused by IR LED, don’t stare at operating lamp.
For below models only
XNF-8010RVM* XNF-8010RV* XNF-8010R*
Risk Group 1
WARNING IR emitted from this product.
Do not stare at operating lamp
Product tested against IEC 62471
overview


Product specificaties

Merk: Hanwha
Categorie: Bewakingscamera
Model: XNF-8010RVM
Kleur van het product: Black, Ivory
Gewicht: 790 g
Breedte: 146 mm
Diepte: 146 mm
Hoogte: 65.8 mm
Soort: IP-beveiligingscamera
Materiaal behuizing: Aluminium
Internationale veiligheidscode (IP): IP66
Maximale capaciteit van de geheugenkaart: 512 GB
Ondersteund audioformaat: AAC-LC, ADPCM, G.711, G.726
Ondersteunde videoformaten: H.264, H.265, M-JPEG
Vormfactor: Dome
Ondersteuning voor plaatsing: Binnen & buiten
Connectiviteitstechnologie: Bedraad
Ethernet LAN: Ja
Montagewijze: Plafond
Maximum resolutie: 2048 x 2048 Pixels
Totaal aantal megapixels: 6 MP
Type stroombron: Power over Ethernet (PoE)
Minimale belichting: 0.1 Lux
Aantal cameras: 1
GeĂŻntegreerde geheugenkaartlezer: Ja
Compatibele geheugenkaarten: SD, SDHC, SDXC
Nachtvisie: Ja
Vaste focale lengte: 1.6 mm
Video bewegings-detectie: Ja
Audiosysteem: 2-weg
Zoomcapaciteit: Ja
Microfoon, line-in ingang: Ja
Aantal Ethernet LAN (RJ-45)-poorten: 1
Focus: Handmatig
Omvang optische sensor: 1/8 "
Beeldstabilisator: Ja
Type beeldsensor: CMOS
Digitale zoom: 8 x
Camera sluitertijd: 2 - 1/12000 s
Ingebouwde microfoon: Ja
Witbalans: ATW, AWC, Indoor, Manual, Mercury lamp, Outdoor, Sodium lamp
Type camerasluiter: Elektronisch
Ondersteunde grafische resoluties: 640 x 640,640 x 160,640 x 480 (VGA),704 x 576,720 x 720,800 x 600 (SVGA),960 x 960,1024 x 768 (XGA),1280 x 960,1280 x 1280,1600 x 1200 (UXGA),1920 x 480,2048 x 1536 (QXGA),2048 x 2048
Webbrowser: Ja
Ruisonderdrukking: Ja
Netwerkstandaard: IEEE 802.3af
Ondersteunde beveiligingsalgoritmen: 802.1x RADIUS, EAP-TLS
Ondersteunt Windows: Windows 10, Windows 7, Windows 8.1
Aantal gebruikers: 20 gebruiker(s)
Temperatuur bij opslag: -50 - 60 °C
Veiligheidsfunties: Vandaalbestendig
Maximaal 30 frames per seconde: 30 fps
Ondersteunde netwerkprotocollen: TCP/IP, UDP/IP, RTP (UDP), RTP (TCP), RTCP, RTSP, NTP, HTTP, HTTPS, SSL/TLS, DHCP, PPPoE, FTP, SMTP, ICMP, IGMP, SNMPv1/v2c/v3 (MIB-2), ARP, DNS, DDNS, QoS, PIM-SM, UPnP, Bonjour, SIP
Ondersteunt Mac-besturingssysteem: Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra
Luchtvochtigheid bij opslag: 0 - 90 procent
IP-adresfilter: Ja
Progressive scan: Ja
Composiet video-uitgang: 1
Ethernet interface type: Fast Ethernet
Signaal/ruis-verhouding: 50 dB
Quality of Service (QoS): Ja
IK code: IK10
Sample rate: 48 kHz
Dichtstbijzijnde focus afstand: 0.3 m
PTZ control: Ja
Dag/nacht modus: Ja
Aantal lenzen: 1
Maximum aperture number: 1.6
Methode voor streaming: Multicast, Unicast
Aantal sensoren: 1
Videostreaming: Ja
Nachtkijker afstand: 15 m
Infrarood (IR)-afsluitingsfilter: Ja
Achtergrondverlichting compensatie: Ja
Aantal effectieve pixels (H x V): 2048 x 2048 Pixels
Op afstand bekijken: Ja
Alarm ingang/uitgang: Ja
Highlight Compensation (HLC) (compensatie voor sterke belichting): Ja
Bitratecontrole: Constant Bit Rate (CBR), Variable Bit Rate (VBR)
Stroomverbruik (voeding via Ethernet (PoE)): 12.95 W
Wide Dynamic Range (WDR): Ja
Stroomverbruik (typisch): 12 W
Bedrijfstemperatuur (T-T): -40 - 55 °C
Relatieve vochtigheid in bedrijf (V-V): 0 - 90 procent
Privézone maskeren: Ja
Systeemfuncties intelligente videobewaking (IVS): Crossing line, Missing object, People counting
Mistbestendig: Ja
Kijkhoek lens, horizontaal: 192 °
Draaien & spiegelen: Ja
Type waarschuwingsnotificatie: E-mail
Ruisonderdrukkingstechnologie: 3D-ruisonderdrukking
Kijkhoek lens, diagonaal: 192 °
Anti-flikkering: Ja
Kijkhoek lens, verticaal: 192 °
Actieve ombevoegde demontage alarm: Ja
Tekstoverlay: Ja
PTZ-modi: Digitale PTZ
Audio detectie: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Hanwha XNF-8010RVM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Hanwha

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera