Haier XBP72-0713S Handleiding

Haier Wasmachine XBP72-0713S

Lees hieronder de 📖 handleiding in het Nederlandse voor Haier XBP72-0713S (2 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Haier Appliances (India)P. Limited

B-1/ A-14, Mohan Co-operative Industrial Estate, Mathura Road, New Delhi-110044.

Tel: 011-30674000/5000. Fax: 011-26971562. Email: info@haierindia.com Website: www.haierindia.com

To do spinning and draining

or rinsing with water-filling

together, please first do

spinning for around 1 minute,

then do draining or rinsing

with water-filling. Otherwise

the spinning will stop owing

to too much water stored in

the spin tub.

Rinse with water-filling

1. Put the laundries into the wash tub. Select suitable wash speed

according to the laundries.

2. Adjust the water level

Set the water level with water level adjusting lever according

to the laundries quantity. Then fill suitable water continuously.

3. Rinse

Adjust the wash timer to 5-7 minutes to do rinsing.

(Repeat the midway spinning and rinsing with stored water for 2-3

times)

Rinse with stored water

1. Put the laundries into the wash tub. Select suitable wash speed

according to the laundries.

2. Fill water to preset water level.

3. Rinse

Adjust the wash timer to 2-3 minutes to do rinsing.

• When the laundries quantity is a few, please use "Standard"

wash speed. If you use "Strong" wash speed, it may splash.

Rinsing

Semi Automatic Washing Machine

User's manual

This manual is for

XPB72-0713S

XPB72-0714D

XPB72-0715S

Please read this manual

carefully before using.

Retain it for future reference.

Customer Name ................................................................................... Address ..................................................................................

Serial No.................................................................

Dealer Seal ................................................................................................................................................................................

Date of purchase............................................... Model No......................

Customer Name ................................................................................... Address ..................................................................................

Serial No.................................................................

Dealer Seal ................................................................................................................................................................................

Date of purchase............................................... Model No......................

H A I E R W A R R A N T Y

HAIER APPLIANCES (INDIA) PVT. LTD. ( hereinafter referred to as "the Company")

hereby offers the following warranty to the original domestic purchaser commencing

from the date of the purchase. The Company, at its sole discretion, will free of charge

repair or replace any defective part or parts which prove to be defective in

workmanship and/or materials and not due to abnormal or improper usage.

CONDITIONS OF WARRANTY

1) This warranty will automatically

terminate on the expiry of the

warranty period from the date of

delivery.

2) The Company is not liable for any

delay in servicing due to reasons

beyond the control of the

Company or any of its authorised

service centres.

3) Parts replaced or repaired under

this warranty are warranted

throughout the remaining of the

original warranty period.

4) It is entirely lelf to the Company's

discretion to repair/replace parts at

the site of installation or at the

authorised service centre of the

Company.

5) This warranty shall be strictly

limited to the repairs or replacement of defective parts specified in the warranty. This warranty shall not cover any

consequential or resulting liability.

6) This warranty shall not, in any case, extend towards payment of any monetary consideration whatsoever or

replacement or return of the product.

7) The Company may repair/supply parts free of cost during the warranty period. This warranty does not cover any

Excise duty. Central or Sales tax, Octroi and other local taxes or levies on the components/parts.

8) The parts shall be replaced by functionally operating equivalent material only and not with brand new ones and are

likely to be different from the one originally fitted. The parts thus removed shall be taken back by the company.

9) The Company reserves th right to retain any part or component replaced at its sole discretion during the warranty

period.

10) In no event the Company or its authorised service centre be liable for any consequential damages or resulting

liability, damage or loss arising directly or indirectly out of any defect in the product.

11) This warranty is not valid in case of the following events:

a) If the product has been installed/serviced/repaired/opened or tampered by any unauthorised personnel.

b) If defects arise/caused by accidents, alteration, misuse, neglect, sunstitution of original components with

spurious/non-genuine components, attacked by household pest/rodents, fire flood, earthquake, lightning

and/or any other act of God/natural calamities.

c) The product is shifted outside India.

12) For any service under this warranty beyond city/town/municipal limits from the Company /authorised service centre,

a fixed charge of Rs. 50 will ne collected from the customer in addition to the actual to and fro charges by the shortest

route.

13) Any change of location or change in the ownership during the warranty period must be intimated in writing to the

Company.

14) The Company's employees or its authorised representatives have no authority to vary the terms of this warranty.

15) This warranty is effected in New Delhi and claims, if any, shall be made only before the courts having jurisidiction in

New Delhi and no claim shall be made against the Company outside New Delhi notwithstanding that the Appliance

may have been sold or delivered elsewhere.

Product

Colour TV

Refrigerator

Washing Machine

Airconditioner

Microwave

Dishwasher

Cloth Dryer

DVD

Warranty

Period Parts not covered

Remote, Cabinet

Plastic, Glassware,

Light bulb

Top Lid, Outer

Casing

Air Filter, Front Gril

Glass, Plate, Bulb

12 Months

Comprehensive: 12 Months

12 Months

Comprehensive: 24 Months

Compressor: 60 Months

Motor: 60 Months

24Months

12 Months

Inspired Living

HAIER APPLIANCES (INDIA) PVT. LTD., B-1/A-14, Mohan Co-operative Industrial Estate, New Delhi-44

Ph. 30674000/5000, Fax: 011-26971562

1. Take off the corrugation pipe.

Dismantle the upper part of the

corrugation pipe inside

the overflow filter (as

indicated in Figure1)

2. Cleaning the overflow

filter.

Clean the lint around the

filter and flush with tap

water.

3. Install the overflow filter.

(a) Install the corrugation pipe.

(b) Insert the mounting plate at the

bottom of the filter into the

valve cover.

upper side.

(d) Push the upper part in as

indicated in Figure 2.

Cleaning the overflow filter

Water level

adjusting lever

Corrugation

pipe

Figure 1

Hook

Figure 2

Alcohol

Petrol

Thinner

Disposal of the complete unit

Wipe the complete unit with soft

cloth twisted dry.

Wipe with neutral detergent if too

dirty.

Do not wash it directly by water.•

•

• After washing, dismount the water

inlet hose.

Do not store water in the tub for

long period. Discharge the water

immediately after each using.

Pull off the power plug and hang up

the power cord.

Hang up the drain hose.

Wipe off the water drops on the

surface and inside the tub with

clean soft cloth.

Open the cover of the wash tub and

the inner/outer cover of the spin

tub for some time (about one hour),

then close them.

•

Packing list

Specification

Water level /Water quantity (L) (about)

Washing / Spinning capacity (kg)

Dimensions (mm)

Maximum/58 Medium/49 Minimum/43

Injection pressure (MPa)

7.2 / 6.0

L 786 W 455 H 945

0.02 0.2

Name Quantity

One piece

One set

User's manual

Warranty manual

Water inlet hose

Lint filter

Gland

Twin-tub washing machine

Disposal after washing

• After using, please clean the lint and foreign materials of the lint filter

and over flow filter in time. Otherwise it may influence your using the

machine.

• Please first pull off the power plug from the receptacle before

cleaning.

• The lint filter must be used during washing.

• It must be cleaned in time after each using.

1. Take off the lint filter

Put hand at the indicated position.

Push down to take it off.(See to Figure 1)

2. Clean the lint

Put it in water and clean while it is

still wet. (See to Figure 2)

3. Install the lint filter

After cleaning , insert the

bottom of the lint filter (marked

with "down side ") into the overflow filter.

then push the upper part of the filter in

(marked with "up side"). (See to Figure 3)

• Too much lint on the overflow filter will

influence the normal usage of the machine.

Please clean it every two months.

• Take off the overflow filter.

As indicated in the figure, nip the elastic fixing

claw and pull it to the direction of the arrow to

take it off.

Figure 1

Figure 3

Figure 2

Elastic fixing

claw

Cleaning the overflow filter

Cleaning the lint filter

Trouble-shooting Answer to question

(If there's breakdown, please pull off the power plug before

checking) The following phenomena are not breakdowns sometimes.

Please confirm again before sending it to repair. If there are real

breakdowns, Please come to the special maintenance department or

after-sale service department of our company. Do not repair it by

yourself.

The machine does

not act.

Is there power failure?

materials?

Is the power plug loose?

Is the pulsator twisted by foreign

The draining does

not work.

There's abnormal

sound during

washing

Are there hair pin, coins or metal items

brought inside the tub?

Is the drain hose put down?

Is the drain hose frozen?

Is the drain hose blocked by foreign

material?

Are there laundries falling to the outer side

of the spin tub?

There's abnormal

sound and violent

vibration during

spinning.

Is the machine slanting?

Is the gland pressed evenly?

Are there laundries falling to the outer side

of the spin tub?

Are the laundries in spin tub too much?

There may be some

water flowing out of

the drain hose in

the first use of the

machine.

It is the water remained in the factory

inspection of performance.

Phenomena The reason

•

Trouble-shooting Answer to question

If the laundries fall to the outer side of the spin tub, please take

them out immediately.

Prevent the freezing(be sure to discharge the water

completely after using)

After complete draining, set the " WASH SELECTOR" at

"STRONG" or "STANDARD". If it is set at "DRAIN", it will be

rather difficult for the frozen water to melt.

When the water is frozen

Pour hot water below 50 C into the wash tub to soak it°

completely. Then turn the pulsator with hands gently. Please

confirm the drainage can work normally before next using.

Below 50 c

2-3L

If the laundries fall to the outer side of the spin tub

When the remained water is frozen

•

1. Put the laundries into the spin tub evenly and smoothly.

2. Press the gland in the tub properly. Close the inner and outer

cover of the spin tub.

3. Spin

Select suitable spin time according to the laundries, and do

spinning.

During spinning, if there's abnormal sound, it is generally

owing to slanting placement of the laundries. Please stop the

machine and re-order the laundries.

• In spinning, it will pause the work if you open the outer cover of

the spin tub. Close it to resume the spinning.

Spinning

Gripper - Haier Manua Revised (correction) - date - 31 - 5 -2010

3. Run the foam-removing spinning.

(a) Open the outer cover of the spin tub.

(b) Set the water-filling selector control

rod at the "SPIN" side. Fill water for

about 1 minute. It the water quantity

filled is too large, the water may flow out

from the wash tub side. Please twist the

water tab to limit the water filling.

Spin for 1-2 minutes.

Put the laundries into the spin tub evenly and smoothly.

Spin

(a) Put the gland in properly.

Please put in the gland properly even if the laundries quantity is small.

(b) Close the inner and outer cover of the spin tub.

Midway spinning

Outer cover of

The spin tub

Inner cover of

The spin tub

Push

Proper The laundries

are slanting

Proper No gland

Push

Gland

WASH SPIN

Installation and adjustment

Please install and adjust the machine according to the requirement of

the manual. It is very important to your security and correct operating

the machine.

Install the lint filter

After opening the package, please take

out the lint filter from the document bag,

install it to the overflow filter of the wash

tub. See to the figure.

The drainage shall be smooth with the

drain hose.

1. The height of the drain hose shall be

less than 10cm, or the drainage will

not be smooth enough and cause

incomplete drainage.

2. Do not tramp or press the drain hose.

3. If the drain hose is too long,

cut it at mid point. To make

smooth drainage, cut the

front end of the hose

slantingly.

4. If extra drain hose is needed, please

make separate purchase. The inner

diameter of the extra hose shall not

be less than 30mm, and the length

shall not exceed 1.5m.

If the extra hose is too long, cut it

either at point A or B.

Usage of the drain hose

> 30mm

<1.5m

<10cm

A B

Overflow filter

Lint filter

Washing sequence

1. Water fill selection

(a) Set fill selection to 'Wash

side'. (Figure 1)

(b) Adjust water level rod to a

position as needed.

2. Fill water and add disolved

powder detergent until water

reaches a suitable level. (Figure)

2) Begin to wash to dispense

detergent uniformly.

3. Put in the wash load, and

supplement water as necessary.

4. Wash selector knob

Select the washing speed

according to the laundries.

(Figure 3)

5. Select the washing time

Se lec t t he was h in g t ime

according to the laundries.

(Figure 4)

6. After washing, the buzzer will

ring.

Set the "WASH SELECTOR" at

"DRAIN". (Figure 5)

Wash

Figure 2

*WA S H T I M E R

OFF

WASH SELECTOR

Figure 5

DR AIN

STRONG

STANDARD

WASH SELECTOR

Figure 3

DR A IN

STRONG

STANDARD

#SOA K T IM E R

Figure 4

OFF

Figure 1

SPIN

WASH

Water inlet

Water filling

control handle

SPIN

WASH

SPIN TIMER

OFF

Overflow sign

Spin timer

(to set to below 1 minute,

first set to 2 minute then

turn it back. it can increase

the service life of the timer).

* For the model with Wash Timer.

# For model with Soak Timer.

Wash selector

(standard wash speed,

strong wash speed)

WASH SELECTOR

DRAIN

STANDARD

Wash/Soak timer

(To set to below 2 minute,

first set to 6 minute then

turn it back. it can increase

the service life of the timer).

WASH/SOAK TIMER

OFF

STRONG

Safety precautions

Petrol

Thinner

Do not stretch hands into the

working machine. It is dangerous

even if the rotation is slow. Take

special care of the children.

Handicapped or children without

care shall not use the machine.

Do not put any hot or heavy items

(such as the kettle with hot water) on

the washing machine.

Do not decompose, repair or alter

the machine by yourself.

Keep the machine away from direct

sunlight and heat source like the

heater.

Do not wash laundries with volatile

materials (such as thinner, petrol

etc.).

Please put down the drain hose before washing, and connect the water inlet

pipe properly.

It is suggosted to use foamless washing powder.

Please don't use the washer in the environment below 0 C.If the washer is

bleow 0 C, the washer's water inlet system and draining system will be

frozen, then result in the damaged of the whole machine. If the washer has

below 0 C, please be sure to ensure the washer is placed under the room

temperature for 2-4 hours and then use.

To protect your laundry and washing machine,

please take out all coins, buttons, sand, hairpins and

other foreign materials from the clothes before

washing.

The musts in washing

Usage of the detergent

Fill water to decided level.

Dilute the whitener with

container. Pour it slowly into

the washing tub.

Avoid using whitener on

laundries with color or pattern

as they are prone to lose color.

The whitener shall not touch

the laundries directly.

Refer to the user's manual for

the usage and quantity of the

whitener.

For powder whitener, please

dissolve it before using.

It is suggested not to use high

sudsing detergent.

•

Direct dissolved in the machine:

1. Fill small quantity of water.

2. Add the powder. Run for 30

seconds to dissolve it completely.

3. Put it in the laundries. Select

suitable water level.

The instant dissolving of the

washing powder.

1. Prepare warm water of 30 C and

a container.

2. Add the powder while stirring to

fully dissolve it.

The powder is more prone to pollute

the laundries than the detergent.

Therefore please use it with proper

quantity.

Dosage of different washing powder

is different. Please refer to the

instruction of the washing powder

for the detail dosage.

•

The capacity of washing and spinning of

the machine refer to the largest weight of

the standard laundries under dry condition

that can be washed or spinned in one time.

Laundries quantity in one washing cycle

shall be lower than the rated capacity.

The thickness, size, type of the cloth will

influence the actual washing capacity. It is

suitable to put in reasonable amount of

laundries and the laundries can be turned

round in washing for one time washing.

Do not select "Maximum" water level for

laundries less than 1.0kg, so as to avoid

splashing of water.

How to use the whitener How to use the washing powder

•

Safety precautions

In case the washing machine is

installed on ground with carpet, do not

block the ventilation hole with carpet.

Do not put the machine at damp

place like the bathroom . Never wash

it with water. Do not place wet

laundries on the control panel.

Do not use water hotter than 50 C.

Do not let the machine share one receptacle

with other electric appliances. If the power plug

is damaged, or the plugging into the receptacle

is loose, do not use the plug any more.

Do not wash water-pfoof laundries

like the raincoat, bike covers etc. to

avoid abnormal vibrations in spinning.

Please insert the power cord into

special receptacle with rated

voltage. Be sure to use single-

phase three pins receptacle.

The earthing terminal of the

receptacle must be earthed

reliably. If possible, please adopt

electric leakage protector.

When the machine is being used

normally, please put the power

plug at the location easily to be

inserted and extracted by hand.

Be sure to pull the plug off when

there's power failure, or the

machine i s bei ng moved,

cleaned of when it is idle.

If the power cord is bad, to avoid risk it is required to replace it by the

technicians of our special shop or the after-sale service department.

Keep the pin of the power plug clean.

Ventilation hole at

the bottom of the

washing machine

50 C

Preparation before washing

Preparation before washing:

1. Connect the water inlet hose.

2. Confirm that the washing machine is earthed

reliably. Then insert the power plug into the

receptacle. Do not connect the earth terminal to

the gas pipe and tap water pipe.

3. Put down the drain hose.

4. Slanting or uneven ground may result in

unstable working or abnormal noise. Please

make the machine stand horizontally.

Check if Clear the Tie the long The quantity of When the pulsator

the laundries pocket. Take strips; fasten the laundries is running, the buttons

has any out the coins, the buttons; shall not be too of the laundries may

special sand, hairpins close zippers. large. Stretch cause noise. For the

requirement etc. and loosen the sake of discretion,

for washing. laundries before please wash the

(fabric putting them in laundries with buttons

should the tub. separately (along with

be marked laundry washing bag).

machine

wash)

a. Check if the laundries are applicable for washing in machine.

b. Divide the laundries that are not colorfast from other laundries.

c. Soak those laundries which absorb water with difficulty, by hand.

d. For those laundries with heavy soil, please first remove the dirt like mud or

dust. for the parts with heavy soil, please apply detergent on them in

advance, which can make it easier to remove the soil.

e. For those laundries that may get lint ball and those with long fur, turn it

over before putting in machine.

f. Do not put the laundries polluted by chemicals into the washing machine

directly.

Pay attention to followings before washing the laundries

Names of the parts

Outer cover of the spin tub

Inner cover of the spin tub

Spin timer

Spin tub

Cabinet

Major frame

Base frame

Wash selector

Wash/Soak timer

Control panel

Overflow filter

Water level adjusting lever

Pulsator

Wash tub

Drain hose

Wash tub cover

Water-filling entrance

Valve cover

Protecting cover

All illustrations in this manual are given for reference only. Your

products and accessories may show differences from these

illustrations due to our continuous improvement.

Notes:

Meaning and description of the symbols

Contents marked with that symbol are

related to the safety of the product and the

personal safety of the users. Please

operate in strict conformity to the contents,

otherwise it may cause damage of the

machine or injure the personal safety of

the user.

Contents marked with that symbol are

actions forbidden to perform. Performing of

those actions may result in damage of the

machine or injure the personal safety of the

user.

Please check if the power receptacle has good earthing condition

before using to guarantee your safety.

Warning sign

Forbidding sign

•

Figure 1

Drain hose

fixing hook

Fig ure 2

Drain ho se

fixing h ook

Pull outwards

slightly

Side sectional view

Fixing hoo k

installa tion hole

Drain hose

Take off

the drain hose

Figure 5 Figure 6

How to change the direction of the drain hoses

Install the water inlet hose; Select the water level

Figure 1 indicates the ex factory

installation position of the drain hose.

Take off the drain hose from the hanging

hole of the cabinet. Pull the drain hose

fixing hook outwards gently to take out

the drain hose from the two fixing hooks.

(As per figure 2)

Rotate the drain hose fixing hook for 90

to take it out from the installation hole (As

per Figure3).

Install the two drain hose fixing hooks

taken out into the installation hole at the

other side of the base frame (to aim at the

installation hole accurately you can lean

the washing machine forward slightly).

Then rotate for 90 (As per Figure 4).

Pull the fixing hook outwards slightly.

Inlay the drain hose into the fixing hooks

reliably along the groove at spin tub side,

and make it extendtowards spin tub side.

Then hang the drain hose into the

hanging hole at the spin tub side. (As per

Figure 5).

Take out the drain hose from the fixing

hook. Extend it from the near side (When)

the drain hose is extended from the rear

side, it can be hung on the point for drain

hose at the two sides of the cabinet.) (See

to Figure6).

•

Extend the drain hose from the side of spin tub

Extend the drain hose from the rear side

Insert the water inlet hose into the water-

filling entrance on the control panel directly-

(pull it out to dismantle it)

Select water level according to the quantity

of the laundries.

Set the water level adjusting lever to

needed line.

Figure 4

Insert the fixing hook into the

installation hole upwards

Rotate the fixing

hook for 90ｰ

to fix it

Figure 3

Take off the fixing

hook downwards

Rotate the fixing

hook for 90ｰ

Water inlet hose

Water inlet

Max

Med

Min

Maximum

Medium

Minimum

Water level

indicator

Contents

• Names of the parts 1

• Safety precautions 2

• Installation and adjustment 4

• Preparation before washing 6

• The musts in washing 7

• Usage of the detergent 7

• Washing sequence 8

• Disposal after washing 12

• Trouble-Shooting * Answer to question 14

• Packing list *Specification 16

Gripper

Product specificaties

Merk:	Haier
Categorie:	Wasmachine
Model:	XBP72-0713S

Heb je hulp nodig?

Als je hulp nodig hebt met Haier XBP72-0713S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Wasmachine Haier

Haier HWMP95TL Handleiding

20 November 2024

Haier HW80-BP14929AS6 Handleiding

10 November 2024

Haier HWD90-B14959S8NU1 Handleiding

3 November 2024

Haier HWM80-316BK Handleiding

24 September 2024

Haier HWD90-B14939S8 Handleiding

11 September 2024

Haier HWM110-B2178S8 Handleiding

17 Augustus 2024

Haier HWM120-B2178S8 Handleiding

17 Augustus 2024

Haier HWM130-B2178S8 Handleiding

17 Augustus 2024

Haier HWD80-B14959EU1 Handleiding

31 Juli 2024

Haier HW90-B14IGITEU1 Handleiding

31 Juli 2024

Handleiding Wasmachine

Nieuwste handleidingen voor Wasmachine

LG WT17BPBK Handleiding

22 November 2024

Bosch WAX32M10 Handleiding

22 November 2024

LG F2WV308NEW3 Handleiding

22 November 2024

Bosch WAU28S70 Handleiding

22 November 2024

Bosch Serie 6 WAU28PH2ES Handleiding

22 November 2024

Bosch WGA142X2TR Handleiding

22 November 2024

LG WF-79X3 Handleiding

22 November 2024

Edesa EWF-7400 X Handleiding

22 November 2024

Smeg WN04SEA Handleiding

21 November 2024

Smeg WHT814ASIT Handleiding

21 November 2024