Haier FCD-JTLD200 Handleiding

Haier Ketel & boiler FCD-JTLD200

Lees hieronder de 📖 handleiding in het Nederlandse voor Haier FCD-JTLD200 (2 pagina's) in de categorie Ketel & boiler. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

1 2

FCD-JTLD200

FCD-JTLD245

Sea-ox King

Sea-o

Sea-ox King

x King

Haier Household Electric Water Heater

Haier Household Electric

Haier Household Electric W

Water Heater

ater Heater

User's Manual

Sea-ox King

Haier Household Electric Water Heater

User's Manual

Rev: 01

Specific Number: 0040501317

:HEVLWHKWWSZZZKDLHUFRP

4LQJGDR (FRQRPLF DQG 7HFKQRORJLFDO 'HYHORSPHQW 'LVWULFW

+DLHU :DWHU +HDWHU &R /WG

*URXS

+DLHU*DUGHQ4LDQZDQJDQJ5RDG(FRQRPLF'HYHORSPHQW=RQH

4LQJGDR35&KLQD

zPlease read this manual before usage.

zRetain it for future reference.

Electric circuit diagram

MT1 BT1 BT2

EH2

Connected to

inner tank

EH1

L: live wire (brown)

N: neutral wire (blue)

MT1: manual reset thermostat

BT1: normal temperature thermostat

BT2: normal temperature thermostat

Safety

It is safe and reliable thanks to quality stainless steel electrical heating elements with

overheating protection and over pressure protection of inner tank.

Durability

Specially treated shell. Elegant and durable.

High quality and reliability due to 3-layer inner tank enamel technology employed in inner

tank production.

Fast temperature rise

Unique separated structure of two heating bars can obtain twice the speed in temperature

rise compared to ordinary water heaters.

Energy saving

It is highly efficient and energy saving due to super thick heat preservation layer.

Convenient operation

60℃ fixed temperature heating means it will stop heating automatically when the water

temperature reaches 60℃.

Multiple uses

Enclosed structure with several outlets can supply hot water to several places like the

washroom, kitchen etc (the hot water from it is not drinkable).

It is suitable for residential houses, enterprises, and service trades like beauty parlors or

hairdressers for supplying hot water.

Floorstanding design facilitates installation.

Features

The water heater you bought is the improved model of the series product. Please use it

according to the User's Manual.

HL: heating indicator lamp

EH1: heating element

EH2: heating element

E: earth (yellow/green)

Technical parameters

Packing list

Components

FCD-JTLD200

FCD-JTLD245

Electric

water

heater

(Set)

Relief valve /

drain hose

(Set)

Check

valve

(Pc)

Instruction

manual

(Copy)

Pipe fitting

(S 1

2F-M 3

(Pc)

3/4”

airproof

met (Copy)

FAQ

Phenomenon Please check Solutions

No water outlet

If the water supply system stops supplying

water or the water pressure is too low Check

If the water outlet is blocked.

If the hot water valve is turned on. Check and clear

Cold water outlet only

If the water temperature is adjusted

properly Adjust again

If the thermostat fails Call the service

department

Heating time is too short Continue to heat

The amount and temperature

of the water delivered are

not stable

If the pressure of tap water is stable Check

Do not heat after the power

is turned on (the heating

lamp does not illuminate)

If the temperature limiter is activated due

to dry heating Call the service

department

The heating indicator lamp

stays on Failed thermostat Call the service

department

Water is coming from the

relief valve

Overly high pressure (>0.7MPa)

or temperature (>99℃)

Call the service

department

Quantity

Model

Safety precautions

• C heck if the ammet er and wi re

diameter are in accordance with the

rated current of the water heater.

Please have them checked by an

experienced electrician if necessary.

• The product is only available for

alternating current.

Be sure to use a separate socket (never

use a multifunctional socket) which is

reliably grounded and complies with

national standards. Dirt on the metal

pins of the power plug shall be wiped o

regularly to avoid fire or other accidents.

To prevent being burned, please do not

face the shower nozzle towards your

body while turning the water valve.

I f the powe r cor d of th e wate r

heater is damaged, be sure to have

it replaced by an after-sales service

technician with a special cord (o ered

by the manufacturer).

Set the power socket of the water

heater in a dry position away from

water. Never insert or pull the power

plug with wet hands to avoid electric

shock, injury or other accidents.

Description of the symbols

This symbol indicates actions you shall never do! Neglecting these instructions may

cause personal injury or even death.

This symbol indicates instructions you must observe! Neglecting these instructions

may cause personal injury or damage to your house or property.

• Do not install it outdoor.

• Do not install it in a place without

drainage.

• Do not place it in a cold environment

where it tends to freeze. The tank

and the tubes may break if water in it

freezes. This may cause leakage and

scalding.

Setting environment

• Before initial use after installation,

please first fully fill water and then

switch on the power. If it is powered

when the tank is not full of water, this

may cause overheating of the heating

element. Children must use under the

supervision of an adult.

• During winter in cold areas, if the heater

is not used for a long period, please

unscrew the blow down nut to drain the

water to avoid damage caused by icing.

Please remember to fill it with water

before turning on the power when it is

used again. The hot water tube may be

relatively long due to the installation

location of the water heater. Please drain

the cold water before use each time to

avoid getting cold water.

• Do not use electrical products with

damaged power cords or loose power

sockets and plugs. Otherwise electric

shock, shor t circuit, fi re or oth er

accidents may occur. Please make sure

the plug fits tightly with the socket.

If drain hose is connected, please

connect it to the inlet of the sewer to

avoid polluting by splashing.

See to the physical product for the appearance, color or pattern.

Rated voltage /

Power

Dimensions/

weight/volume

Waterproof

grade

Rated

temperature

Pressure of the

tap water

Rated

pressure

Frequency

220V~/

2500W

230V~/

2700W 0.7MPa50Hz

See Fig.1 IPX4 60 ℃not less than

0.05MPa

5 6

3 4

Cleaning and maintenance

Note:

Please deal with simple issues by referring to the attached "FAQ" before calling a service

person.

Statement: Maintenance or repair work can only be performed by qualified service persons.

Improper methods may cause serious accidents or property damage. Make sure to

unplug the water heater before you intend to open the water heater or repair it.

To clean the outside: Disconnect the power supply before cleaning the water heater. Wipe it

lightly with a piece of wet cloth dipped in a little neutral detergent other than gasoline or other

solutions. Then, wipe it with a piece of dry cloth and keep the shell dry. Do not clean it with

detergent containing abrasives (e.g. toothpaste), acid, chemical solvents (e.g. alcohol) or polish.

To clean the inside: To keep the water heater working efficiently, the heating elements and the

inner tank should be cleaned once every three years. Take care not to damage the protection

coating outside the heating element and inside the inner tank. The magnesium anode rod

should be replaced periodically according to local water quality and the using habits.

To clean the inner tank: Blowdown procedure: disconnect the power supply, turn off the

inlet valve and turn on the relief valve to relieve pressure. When no water comes from it,

turn o all the water outlet valves. Remove the drain hose of the relief valve together with

the double nipple. Then, unscrew the blowdown nut. Connect the drain hose with double

nipple on the blowdown port (put the other end of the drain hose in the sewer inlet). Turn

on any one of the water outlets to conduct blowdown. Clean water coming out of the

drain hose indicates the dirt in the inner tank has been totally discharged. Install all the

components in their original places. Note: the water inlet valve should be turned on several

times to rinse the dirt at the bottom of the inner tank during blowdown.

Precautions during use

To avoid damage, never turn on the power before the inner tank is fully filled with water.

To avoid scalding, adjust the water temperature to an appropriate degree before use. Water

over 50℃ can result in scalding.

The relief valve should be checked once every two weeks during use. The method: turn the

small handle of the relief valve. It is normal if there is water flowing from it. If not, please

contact local after-sales service center.

The product is a water heater of enclosed type. It can supply hot water to several locations

such as bathroom (bathtub, hand wash basin, shower nozzle) and kitchen.

If the water heater is not to be used for an extended period or if it is to be repaired, please

turn o the inlet valve and turn on the relief valve to relieve pressure. Then, open the water

outlet and blowdown port to drain the water in the inner tank. Before reusing, to avoid injury

or accidents, it is recommended to turn on the hot water valve before turning on the power of

the water heater. In this way you can discharge air in the pipeline. At this time, please do not

smoke or light other open flames near the open valve. Meanwhile, carefully check that all the

components of the water heater are in good condition. It can be put into use after all of these

are confirmed. Note: the other end of the drain hose may not be higher than the pressure relief

hole of the relief valve. The drain hose should be inserted into the floor drain or other places to

facilitate draining.

Please ask a service person to conduct safety examinations regularly. Remove the scale on the

heating element in time. Check the consumption of the magnesium anode rod and replace it

in a timely manner if it is too seriously worn.

Dimension diagram Appearance and components

12 0

24 6 175

290

145

185

Note:

the allowed error range of above parameters is +10%.

Model Volume Net weight a1 b2 c1

FCD-JTLD200 200L 58 kg 1220mm 629mm 601mm

FCD-JTLD245 245L 65 kg 1399mm 629mm 601mm

Check valve

Blow-

down

port

Relief valve

Electrical

cabinet 1

Heating

element 1

Magnesium

anode rod 2

Electrical

cabinet 2

Heating

element 2

Magnesium

anode rod 1

Shell

Heat preservation

layer

Enamel inner

tank

Blowdown pipe

Indicator lampIndicator lampIndicator lamp

Installation methods

Be sure to have it installed by the installation sta from the after-sales service center of

the manufacturer or a center authorized by them. It adopts floorstanding installation.

Locate the water heater and install all the pipes with a tap water tube (PP-R pipe is

recommended) according to the dimension diagram and the user's requirements.

Mount the relief valve and other accessories according to figure 2. Remember to use

Teflon seal tape to avoid leakage.

To facilitate installation and dismantling of the water heater, it is recommended to fit a

G1/2” flexible nut at the suitable location on the water inlet pipe and outlet pipe separately.

Confirm the positions needing water supply and connect the water inlet pipe, outlet pipes

and tap water pipes to the locations separately.

When installing the water heater, please reserve certain space to facilitate future

maintenance and repair. Fig. 2 is only a reference installation schematic of pipelines. In

specific installations, the actual situation of the user should be considered.

Connection and use of the check valve:

Connect the check valve with G1/2

”

connection screw according to the arrow on it.

Mount the relief valve on the water heater with position as shown in Fig. 2. Fit the double nipple in the

relief hole of the relief valve and then screw one end of the drain hose onto the double nipple (as shown

on Fig. 3). When the water heater is powered on, a small amount of water may drip out of the drain hose.

This is a normal phenomenon caused by expansion of water inside the water heater. The relief hole must

be kept unblocked.

The drain hose can be cut short or extended as necessary. Connect the other end of the drain hose to

the sewage drain to avoid polluting by splashing. The drain hose connecting the relief valve should be

installed in a continuous downward direction and in a frost-free environment.

Be sure to check and confirm that the tank is fully filled with water, that there is no leakage from any

joints, and that the power supply complies with the requirements before switching on the power.

Check

valve

Blowdown

port

Water outlet

pipe

Relief

valve Drain hose

Water inlet

pipe

Indicator lampIndicator lampIndicator lamp

Special hints

Be sure to disconnect the power supply before performing any maintenance or repair work

on it. Only professionals should be allowed to adjust or repair the water.

Make sure the water heater is fully filled with water before turning on the power. Otherwise

malfunction of the heating element may occur. Please make sure the power socket complies

with applicable national standards and is reliably grounded. Never use the water heater

without reliable earthing.

The water heater is fitted with a relief valve. To ensure safety, please do not change its

installation location and never block its outlet.

When the ambient temperature is under 0℃, the piping may be damaged due to freezing

of water in it and cause the water heater to malfunction. So you shall drain the water in the

tank to avoid freezing. If the water heater is not to be used for a period of over 1 month,

please unplug the power cord and drain the water tank.

If the electrical water heater is seriously soaked with water, it must be examined and repaired

by a technician authorized by the manufacturer before it is put into use again.

Scale can be formed in the water tank after long periods of use. Besides, water quality may

change due to ageing of the water pipe. After you wash rice or vegetables with water from

the water heater, please rinse them with clean tap water.

Do not place flammables such as gasoline near the water heater to avoid fire or other

accidents.

Precautions during installation

Make sure the inlet pressure of the tap water is not less

than 0.05MPa.

The electrical water heater shall be installed indoors where

the ambient temperature is over 0℃. The pipelines shall

be arranged centralizedly. The location of hot water usage

should not be too far way from the water heater. If the

distance is more than 8 meters, the pipe shall be wrapped

with a heat preservation layer to reduce heat loss.

In selecting the installation location of the water heater,

convenient usage and repairing should be considered.

Besides, it must be installed in a place with a sewer so that

it will not cause damage to facilities nearby or downstairs

when the water tank and/or pipes leak.

Do not confuse the water inlet pipe and outlet pipe. The

relief valve shall be installed in the specified location. No

change is allowed. Its pressure relief hole must be kept

unblocked.

To ensure safety, please use a separate socket (never

use a multifunctional socket) which is reliably grounded

and complies with national standard. Check with an

electroprobe to ensure that the live wire and the neutral

wire are not connected backwards. Do not turn on the

power before ensuring that it is fully filled with water, that

there is no leakage from any joints, and that the power

supply meets the requirements.

Using method

In initial use after installation, it must be fully filled with water before turning on the power.

In first use, as the inner tank is empty, you must turn on the tap and one of the water outlets.

Wait until water comes out continuously from water outlets (it indicates the tank is full) and

then turn o the water outlet.

Check all the joints for leakage. After that, plug in the power cord

After the power is turned on, the upper indicator lamp illuminates and the upper heating

element starts heating. When the temperature of the hot water in the water heater reaches

60℃, the upper indicator lamp goes out, the lower indicator lamp illuminates and the

lower heating element starts heating. The water heater continues to work. When the lower

indication lamp goes out, the water heater stops working and the whole water heater

reaches the rated temperature 60℃.

The rated temperature of the water heater is 60

℃

. The indicator lamps will illuminate in

heating state. When it reaches the rated temperature, the power will be turned o and the

indicator lamps will go out.

Large amount of water will come out from the drain hose of the relief valve if the pressure of

the tap water is higher than 0.7MPa. This is caused by overly high water pressure. Please call

the after-sales service center. Water or vapor will come from the drain hose of the relief valve

if the temperature of water inside the inner tank exceeds 99+0

-5 ℃. It is reducing temperature

by relieving pressure as the temperature is too high. Please call the after-sales service center

in this case. Please keep away from the drain hose during use to avoid scalding.

(Fig 1)

(Fig 3)

(Fig 2) For reference only

Relief valve

Unit: mm

Product specificaties

Merk:	Haier
Categorie:	Ketel & boiler
Model:	FCD-JTLD200

Heb je hulp nodig?

Als je hulp nodig hebt met Haier FCD-JTLD200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Ketel & boiler Haier

Haier HP200M1-U1 Handleiding

14 Maart 2024

Haier GV100REMB Handleiding

22 November 2023

Haier ES30V-A3 Handleiding

22 November 2023

Haier ES50H-CK1 Handleiding

22 November 2023

Haier JSQ25-13WPT(12T) Handleiding

6 Juli 2023

Haier ES60H-S5K(E) Handleiding

30 Juni 2023

Haier ES50H-A3(E) Handleiding

29 Juni 2023

Haier EC6003-YT3 Handleiding

29 Juni 2023

Haier JSQ20-T(12T) Handleiding

26 Juni 2023

Haier GV270REMB Handleiding

22 Juni 2023

Handleiding Ketel & boiler

Nieuwste handleidingen voor Ketel & boiler

Panasonic DH-6VS1 Handleiding

25 November 2024

Philips AWH1201 Handleiding

24 November 2024

Philips AWH1211 Handleiding

24 November 2024

Philips AWH1200 Handleiding

24 November 2024

Philips AWH1205 Handleiding

24 November 2024

Philips AWH1204 Handleiding

24 November 2024

Rinnai EHPA250VMAWH Handleiding

21 November 2024

Rinnai ECF29i50 Handleiding

21 November 2024

Rinnai ECF19i60 Handleiding

21 November 2024

Rinnai FM10NA Handleiding

20 November 2024